Set the compat-version of the sysupgrade image to 1.0 in order to allow
upgrades from Gluon-sources which are based on swconfig and do not
ignore mismatching minor compat-versions.

Signed-off-by: David Bauer <mail@david-bauer.net>

b804281 autoupdater: ignore minor compat-version

gluon-core: split dual lan devices

Fix make lint

Gone due to
commit 45c84a11 ("ar71xx: drop target")

TP-Link TL-WR902AC v1 is a pocket-size, dual-band (AC750), successor of
TL-MR3020 (both devices use very similar enclosure, in same size). New
device is based on Qualcomm QCA9531 v2 + QCA9887. FCC ID: TE7WR902AC.

Specification:

- 650/391/216 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 1x USB 2.0 (GPIO-controlled power)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887)
- 5x LED (GPIO-controlled), 2x button, 1x 3-pos switch
- UART pads on PCB (TP1 -> TX, TP2 -> RX, TP3 -> GND, TP4 -> 3V3, jumper
  resitors are missing on TX/RX lines)
- 1x micro USB (for power only)

Flash instructions:

Use "factory" image under vendor GUI.

Recovery instructions:

This device contains tftp recovery mode inside U-Boot. You can use it to
flash OpenWrt (use "factory" image) or vendor firmware.

1. Configure PC with static IP 192.168.0.66/24 and tftp server.
2. Rename "openwrt-ath79-generic-tplink_tl-wr902ac-v1-squashfs-factory.bin"
   to "wr902acv1_un_tp_recovery.bin" and place it in tftp server dir.
3. Connect PC with LAN port, press the reset button, power up the router
   and keep button pressed until WPS LED lights up.
4. Router will download file from server, write it to flash and reboot.

MAC Address summary:
- wlan1 (2.4GHz Wi-Fi): Label MAC
- wlan0 (5GHz Wi-Fi): Offset -1 from label
- eth0 (Wired): Offset +1 from label

Root access over serial line in vendor firmware: root/sohoadmin.

Based on support in ar71xx target by: Piotr Dymacz <pepe2k@gmail.com>

modules: update to latest HEAD

1e1d004 cjdns: support the supernodes feature (#884)
2c3cf7f cjdns: bump v21.1 and patch find-python (#883)

782f9a2b0 xray-core: Update to 1.5.8
976a19be5 cloudflared: Update to 2022.6.2
7fa87d732 v2raya: Update to 1.5.8.1
2869c80fc django: bump to version 4.0.5
d588074cc ddns-scripts: mydns.ip to mydns.jp
2d2f7a07f curl: bump to 7.83.1

618ab576be base-files: allow ignoring minor compat-version check
2726c8c315 ramips: fix booting on ZyXEL NBG-419N v2
515404a81b realtek: add support for power LED on Netgear GS108Tv3
bbf8651ba5 realtek: add support for power LED on Netgear GS308Tv1

posix-sh does not support pipefail this way

to prevent word splitting and globbing

Both are effectively the same hardware, the latter being Buffalos
replacement model.

Gone due to
commit 45c84a11 ("ar71xx: drop target")

OpenWrt now allows to specify the ifname of the transition interface
instead of SSID and BSSID, internally automatically detecting these from
interfaces on the same PHY. Thus, these cross-VAP dependant
configuration can be omitted from UCI.

Signed-off-by: David Bauer <mail@david-bauer.net>

modules: update to latest upstream HEAD

27ff7f17d prometheus-node-exporter-lua: fix waiting for interface

76c5c95d94 Revert "mac80211: add a bug fix for a rare crash"
8f7e0cbebf ramips: fix RT-AC57U button level

modules: update to latest upstream

Co-authored-by: Maximilian Baumgartner <aufhaxer@googlemail.com>

Gone due to
commit 45c84a11 ("ar71xx: drop target")

8706ce73a python3: Update to 3.10.5, refresh patches
fe2783799 dnsdist: update to 1.7.2
6a7ee3e0a dawn: update to 2022-06-13
d6ad2268f dawn: update to 2022-06-11
179c12e13 dawn: update to 2022-06-09
c7552ebf6 telegraf: update to version 1.23.0
f84ccb401 node: bump to v16.15.1
61ea9bb1a lighttpd: update to lighttpd 1.4.65 release hash
4d09e0637 irqbalance: upstream patch to fix segfault
827a6352b irqbalance: upstream patch to fix irq-module relation
942a09163 prometheus-node-exporter: fix ubus stations
a9accc565 prometheus-node-exporter-lua: use uhttpd-mod-lua
ab327729c prometheus-node-exporter-lua: fixup openwrt collector
a7110baf4 prometheus-node-exporter-lua: add netclass.lua collector

f393581f66 hostapd: add owe_transition_ifname
19f3ee51a2 mpc85xx: enable error reporting for RAM and PCIe
3a02b8a29f uboot-mvebu: update to version v2022.04
b65e4d7c5f uboot-mvebu: remove enabled CONFIG_CMD_SETEXPR
68a6d7aaab uboot-mvebu: add patch to enable setexpr for clearfog boards

Bumps [zeebe-io/backport-action](https://github.com/zeebe-io/backport-action) from 0.0.7 to 0.0.8.
- [Release notes](https://github.com/zeebe-io/backport-action/releases)
- [Commits](https://github.com/zeebe-io/backport-action/compare/v0.0.7...v0.0.8

)

---
updated-dependencies:
- dependency-name: zeebe-io/backport-action
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>

Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

modules: update to latest Git HEAD

4b2b6b3 naywatch: add log when naywatch activates

3aaf33242 mosh-full: Add perlbase-text dependency
7caba084e mosh-full: Sort dependencies alphabetically
afea2bcaf beep: change git repository to fix CVE-2018-0492 and CVE-2018-1000532
a7c3a883d node: bump to v16.15.0
b38fedc4d xray-core: increase nofile limitation
927464150 xray-core: Update to 1.5.7
486508e25 dnsproxy: Update to 0.43.1
e9bab297a golang: Update to 1.18.3
83516e303 gg: Update to 0.2.6
fb773a5fe htop: update to 3.2.1
bc417a955 libcoap: make sure `libcoap-3-notls.so` is installed
b1fa0b81c ksmbd-tools: update to 3.4.5
b86d48ee2 ksmbd-tools: update to 3.4.4
0060d7663 irqbalance: remove local patch for socket directory
cd35bee8b irqbalance: update to 1.9.0
dbec8e910 yggdrasil: stop properly

3cfe050c4a kernel: crypto: add kmod-crypto-chacha20poly1305
23f0fea742 sunxi/cortexa53: enable armv8-CE crypto algorithms
83dfa4156e rockchip/armv8: enable armv8-CE crypto algorithms
7f4467784f octeontx: add armv8-CE version of CRC T10
9ff2e7d3e7 mvebu/cortexa72: enable armv8-CE crypto algos
75ffc994ba mvebu/cortexa72: refresh kernel 5.10 config
cd25cc0558 mvebu/cortexa53: enable armv8-CE crypto algos
23bc97c281 mvebu/cortexa53: refresh kernel 5.10 config
33dd466422 layerscape/armv8_64b: enable armv8-CE crypto algos
51f1480e48 bcm4908: enable armv8-CE crypto algorithms
4101c8191e bcm27xx/bcm2711: enable asm crypto algorithms
8f393cf2f8 bcm27xx/bcm2710: enable asm crypto algorithms
2b4fba8750 ath79: D-Link DAP-2680: select QCA9984 firmware
d5f911e68f OpenWrt v22.03.0-rc4: revert to branch defaults
677e3c18fe OpenWrt v22.03.0-rc4: adjust config defaults
2b1941e47d bcm53xx: remove BROKEN flag from Asus RT-AC88U
a83dc6b06d kernel: move Toshiba-TC58NVG0S3H patch to ipq40xx
3b90edaff9 wolfssl: make WOLFSSL_HAS_OPENVPN default to y
fe9c4593b5 wolfssl: enable CPU crypto instructions
50b6f5604b wolfssl: add benchmark utility
f4b7541b22 wolfssl: don't change ABI because of hw crypto
ff889898d2 kernel: bump 5.10 to 5.10.120
0ca9367069 kernel: bump 5.10 to 5.10.119
49f8a75031 kernel: bump 5.10 to 5.10.118
3ce3de934c kernel: bump 5.10 to 5.10.117
b24c301709 ksmbd: update to 3.4.5
e8fedf26ab ath79: allow use GPIO17 as regular gpio on GL-AR300M devices
c29641f718 ath79: ZTE MF286[,A,R]: use GPIO19 as ath9k LED
9325aefaf3 ath79: ZTE MF286[,A,R]: fix WLAN LED mapping
720a7db7ea build: fix find warning with SCAN_EXTRA
8e9eaef70a kernel: fix crashes in bridge offload code
33df033b73 mac80211: add a bug fix for a rare crash
d04a947b6b uboot-imx: fix wrong make flags overriding
972160a0f7 kernel: backport flow offload fixes
26958e9724 bmips: dgnd3700v2: fix network config
fe04b41d70 libubox: update to the latest version
9c0f94e955 ltq-vdsl-app: disconnect when service is stopped
8f4b5fdd5f ltq-vdsl/ltq-adsl: fix elapsed time calculation
ea0744fbc6 ltq-atm/ltq-ptm: avoid unnecessary build dependencies
290c13b7d7 ltq-vdsl-mei: add locking to interrupt handler
d0397abd9d ltq-vdsl-app: set MAC address for vectoring error reports
642d6c0c6d ltq-vdsl-mei: enable vectoring error sample callback
e56836dfc1 ltq-vectoring: add driver
de0a9b0eab realtek: add gpio-restart for D-Link DGS-1210-28
e2ca166479 realtek: add reset button for D-Link DGS-1210-28
638220bfee packages: nvram: add NVRAM quirks for bcm53xx target
bee8612d4f bcm53xx: add support for Asus RT-AC88U
ee4a765090 realtek: add support for ZyXEL GS1900-24E
045fe28d4e ramips: use hotplug script for EAP615-Wall MACs
f77d77e726 tools/mkimage: increase tmpfile name length limit
4afa65af8e fstools: update to git HEAD
0a47d52287 ubus: update to git HEAD
76b4b50bbe netifd: update to git HEAD
19f287a7ca procd: update to git HEAD
2ca8bccb00 netifd: update to the latest version
002e05bf9f uqmi: update to git HEAD

gluon-autoupdater: check default branch name, check number of pubkeys, revert invalid branch on update/reconfigure

docs: add docs for gluon-mesh-vpn-wireguard

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Use the candelatech firmware for the QCA Wave-2 firmware.

The Qualcomm firmware used for the IPQ401x chip in OpenWrt in 22.03
is experiencing heavily degraded performance due to excessive
retransmits when using A-MSDU. Disabling VHT modes or switching to the
candelatech firmware circumvents this issue.

Apply the same to other Wave-2 platforms in order to keep consistency
with upstream.

Wave-1 chips do not support mesh modes with the -ct firmware, so keep
using the QCA firmware in their case.

Signed-off-by: David Bauer <mail@david-bauer.net>

modules: update to latest HEAD

656ed7aef openwisp-config: update to 1.0.0
29d26d1d0 xray-core: Update to 1.5.6
0647d444b cloudflared: Update to 2022.5.3
62514d596 yq: Update to 4.25.2
a9eed2e80 php8: update to 8.1.6
b42781523 php8: update to 8.1.5
a60cb1fbd libxml2: update to 2.9.14
dbe3820f3 pdns-recursor: update to 4.7.0
1646a22dd strongswan: support child rekey by bytes and packets