In order to be backwards-compatible, pretend to have 1 Mbit/s 802.11b as
basic rate regardless of the actual setting. This is required to keep
compatibility with other non-patched mesh neighbors.

Signed-off-by: David Bauer <mail@david-bauer.net>

Signed-off-by: David Bauer <mail@david-bauer.net>

c06d4df974 mac80211: set basic-rate for mesh interfaces
0c52c9d6fc ath79: reset ETH switch for AR9344
50dcebeb8a OpenWrt v24.10.0-rc5: revert to branch defaults
3d17274ca8 OpenWrt v24.10.0-rc5: adjust config defaults
6dacba30a7 mediatek/filogic: add support for Cudy AP3000 v1
d92fc99360 mediatek: Fix U-Boot variables handling for D-Link M30 A1
785ea040ec mac80211: rt2x00: some improvements for rt5592
b8c53881db mac80211: rt2x00: some improvements for mt7620
5679b7aef6 mac80211: rt2x00: some improvements for rt2800 generic
e63d289bbd realtek: trim default package selection
8931d617dd ath79: Push MV88E6060 DSA switch into package
e80b7a63f1 ixp4xx: Break out mv88e6060 DSA switch to package
3d0ed57b16 mediatek: append metadata to factory-uboot.bin for WSR devices
deb0f28b5e lantiq: xrx200: add support for lan3 and lan4 on AVM 5490/5491
8b5f3ee940 base-files: strip space and tab characters from ASCII mac address
676dfd1363 base-files: enable get_mac_ascii() to handle redundant strings
b0261c3861 uboot-mediatek: add missing LED command for OpenWrt One
d543a9ae66 uboot-mediatek: fix Routerich AX3000 support patch
976bfe61e0 ramips: mtk-mmc: remove nt76x8 pinctrl hack
09378395cd ramips: make package kmod-sdhci-mt7620 conflict with kmod-mmc-mtk
f311c9754c ramips: fix SDXC function for mt76x8 one eth port devices
f81f707c05 ramips: add back SDXC card reader support for HiWiFi HC5x61A
4d9b06c571 ramips: mmc-mtk: add more vendor driver register init values
cc733e7e2a ramips: mt762{0,8}: reduce default MMC clock to 24 MHz
fe8812ab96 bcm27xx: remove duplicated kmod-rp1-pio package
096e3f26ef rockchip: enable USB3 port on NanoPC T6
767ad64921 rockchip: backport recent rk3588 clk updates
7a112661d5 bcm27xx/bcm2712: Fix-up RP1 modules
2f60e7f006 wifi-scripts: fix setting tx power on some drivers
6ba1f831c7 mt76: update to Git HEAD (2025-01-04)
56b2d856a2 generic: 6.6: backport upstream r8169 patches
56b19f0d50 generic: 6.6: backport upstream Realtek PHY patches
111c62a06a rockchip: refresh patch
cf887640a3 mbedtls: Deactivate ARIA block cipher by default
993ade9eb3 config: enable SECCOMP support for loongarch64
43e1b47d70 procd: update to Git HEAD (2024-12-22)
14722242af rockchip: fix phy reset on rk356x
09fcac8bc0 kernel: bump 6.6 to 6.6.69
bbfebf8527 kernel: add workaround for page_pool_release warnings
9b9622271e ipq40xx: fix label MAC address for FritzBox 7520/7530
efebdf077c ubus: update to Git HEAD (2025-01-02)
184d1c93cb config: rename SECCOMP to USE_SECCOMP
933ae0699a build: remove targetinfo invalidation based on .config
19db092082 linux: fix missing default packages in profiles.json
c22410e7a9 imagebuilder: move handling of DEFAULT_PACKAGES into shareable place
f97e729f8c build: fix including busybox, procd and apk/opkg in imagebuilder
83afb428b0 build: remove broken dependency of metadata on toplevel .config variables
85d1d03cab mt76: update to Git HEAD (2025-01-03)
3ad92b68f1 mt76: update to Git HEAD (2024-12-30)
3bd2962c3d mac80211: update to version 6.12.6
5330f62085 mac80211: refresh patch for ath12k
369d2f3bf9 realtek: add 1920-24g-poe-180w to mac address
d5f01971f7 realtek: drop extraneous ')' in 02_network
36f7db978a ramips: mt7621: enable lzma-loader for Amped Wireless ALLY
f91d8e9f37 trusted-firmware-a.mk: fix release download URL
b80de63e9f mediatek: filogic: add KTD2026/7 driver to Acer Connect Vero W6m
35e02b31c0 generic: add missing CONFIG_LEDS_KTD202X symbol
a9ddc7432a generic: backport support for KTD2026/7 rgb(w) led controller
812046971e mediatek: Fix primary MAC of D-Link M60
a2b1aaee80 realtek: add support for HPE 1920-24G PoE-180W (JG925A)
32981677bd tools/dwarves: update to v1.28
7a0b76cf0f bpftool: Update to v7.5.0
b66773aac3 libbpf: Update to v1.5.0
11275bec82 realtek: add support for HPE 1920-24G-PoE-370w
1f94fa16d8 realtek: rtl838x: refactor hpe_1920-24g dts
67e070c11b kernel: bump 6.6 to 6.6.68
1eff737906 ipq40xx: orbi: add ethernet0 alias
9a0a05d52a busybox: fix LTO compiler flags
dad450b115 bcm27xx-utils: update to latest version
d1dd5b2301 bcm27xx-gpu-fw: update to v1.20241126
684223c4a4 bmips: pinctrl-bcm63268: add gpio function
4b4f319931 Revert "bmips: drop macronix nand block protection patch"
3a5584e0df bcm27xx: pull 6.6 patches from RPi repo
cccc7651ec bcm27xx/bcm2712: add RP1 drivers via kmods
17752bd9ce kernel: bcm27xx/bcm2712: add RP1 functionality
f4c5d0e77e bcm27xx: patches: cherry-pick for RP1 kmods
3ca3ee6012 bmips: drop macronix nand block protection patch
76a546a83a kernel: generic: patch: 802.2+LLC - set transport_header offset
5b4a081f47 octeon: add kmod-usb-dwc3-octeon to DEFAULT_PACKAGES
47e3413f6b kernel: add kmod-usb-dwc3-octeon
7cbaa9e81f netfilter: fix bogus reference to `kmod-nf-conntrack-timeout`
90f84a22b0 mvebu: fix Linksys power LED

Signed-off-by: Florian Maurer <f.maurer@outlook.de>

Silence warnings for missing rate information.

These warnings do not provide value. Instead, they might rotate more
crucial information out of the kernel message ringbuffer.

Link: https://github.com/freifunk-gluon/gluon/issues/3160



Signed-off-by: David Bauer <mail@david-bauer.net>

With the update to OpenWrt 24.10 the bridge MLD wakeup call feature was
removed. However the issue with Android devices and MLD is still
present. Therefore readding the bridge MLD wakeup call patch and porting
it to Linux 6.6 / OpenWrt 24.10.

Link: https://issuetracker.google.com/issues/149630944


Fixes: b7481fd0 ("modules: switch to OpenWrt 24.10")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

This reverts commit 702211ac.

And refreshes the according patches to OpenWrt 24.10 / batman-adv
v2024.3.

Patch needs a rebase. Remove in the meantime.

Signed-off-by: David Bauer <mail@david-bauer.net>

7ee4fe770 CI: multi-arch-test-build: move to shared workflow
a94b703f8 openwisp-monitoring: allow not depending on rpcd-mod-iwinfo
452e1bfd6 openwisp-monitoring: fix Makefile for 0.2.0 update
e7c336c18 openwisp-config: fix Makefile for 1.1.0

This reverts commit b4807e75.

The race condition has been fixed in OpenWrt.

dced292d68 OpenWrt v23.05.5: revert to branch defaults
28cf53e6bd OpenWrt v23.05.5: adjust config defaults
10cc5fcd00 build: align SOURCE path for build system and SDK
87fbb5085d ipq40xx: re-add label MAC address for FritzBox 4040
a2a67804fc firmware-utils: bump to latest openwrt-23.05
ace013101c realtek: 5.15: backport VLAN fix
8e75eed617 ath79: fix I2C pins on GL-AR750
4d4d260f5b ramips: tp-link er605-v2: Remove sysupgrade-tar image
66055df3e0 ucode: another fix for host installation
dd4b05ee8a ipq40xx: add PoE passthrough GPIO
4d7ad37891 ramips: mt7621: use lzma-loader for Sercomm NA502s
e3bb35811e lldpd: fix reload bug: advertisements shall default to on
0b48b832a9 lldpd: extended interface(s) parsing to handle patterns
7ee813b3ef lldpd: make management address advertisement controllable
af6a852ced lldpd: make capabilities advertisement controllable
cec02193d5 lldpd: note about capabilities
ca0c2363c2 lldpd: fix restart
3d3dad61b2 lldpd: update URL
d7765c488c lldpd: shellcheck fixes
601bbdda6a lldpd: implement lldp_policy parameter
56675166e8 lldpd: Implement location parameter
7542e7927b lldpd: fix error "sh: XXXms: bad number"
b886948692 lldpd: refactor out ifaces derivation; reuse function
74581b02b2 lldpd: remove unneeded quotes
8766fed5cd lldpd: remove unneeded quotes and variable quoting
64b38f3bd5 lldpd: remove unneeded quotes and variable quoting
89759ee4bb lldpd: remove unneeded quotes and variable quoting
50135a03a6 lldpd: remove unneeded quotes
4446346fdd lldpd: remove unneeded quotes and variable quoting
b1ddf0a859 lldpd: fix a paste error from commit 1be2088a5247b2cfabe8be991c1e52ddaf780a16
c0217ef8f8 lldpd: spell fixes
1d14e0abfc lldpd: fix -k 'lldp_no_version' row
4ebd60b083 lldpd: add option to force EDP
13193cb070 lldpd: only use snmp options when compiled in
02e3845890 lldpd: Update Makefile package release
a7f749ded4 lldpd: add option for tx delay and tx hold
b2008404ab lldpd: add option to set system platform
18fc86a0f5 lldpd: add option to force SONMP enabled
1201a69664 lldpd: add option to force FDP on
d6da0952ab lldpd: set CDP version and allow forcing CDP on
7f58fc14d8 lldpd: allow disabling LLDP protcol
ed3f182d63 lldpd: add portidsubtype option
6cbc100762 lldpd: add agent-type option
be4824977b lldpd: add LLDP MED options
15e6259231 lldpd: option to disable LLDP-MED inventory TLV
59ad77faba lldpd: Init adds no-version option
1d83e4c5ed lldpd: Allow neighbour filtering
f79ab96312 lldpd: LLDPD binds to only specified interfaces
b0f991d03c lldpd: Init config read on reload
8f714af40b lldpd: add lldp_syscapabilities config option
3b85719b62 ucode: fix missing backslash
461102d99c ncurses: Fix path in ncursesw.pc
b1858ffbf3 build: autoconf: set ac_cv_func_setresuid=true
912acb6c09 filogic: add missing 2.5G PHY LEDs configuration for Zyxel EX5700
7e42fdcafe mac80211: Update to version 6.1.110-1
4fa16c1e24 openssl: update to 3.0.15
a0ebff651d mbedtls: Update to 2.28.9
8e5e62416f kernel: bump 5.15 to 5.15.167
fd6e077ddf kernel: bump 5.15 to 5.15.166
bad01d4806 kernel: bump 5.15 to 5.15.165
cc938b18a8 ucode: fix host installation
ee3efefc5e treewide: fixup models names for UniFi U6 series

4c03fe22b7 target.mk: fix arm architecture level detection
2a099d36a7 armsr: add realtek and smsc ethernet phy drivers to the default image
7a4f468d07 armsr: enable framebuffer emulation for virtio-gpu/drm displays
299893c9c9 kernel: armsr: Renesas: RZ: Ethernet module and ttySC0
be4d0d0cd6 armsr: armv8: enable serial console for Renesas platforms
d0744c1f66 mediatek: Add support for D-Link EAGLE PRO AI R32
95fac7d0e4 package/utils/secilc: drop PKG_CPE_ID
16601bbd42 package/network/utils/iptables: fix PKG_CPE_ID
8c20083c1d package/libs/libjson-c: fix PKG_CPE_ID
6ea9cf3203 package/network/services/dropbear: fix PKG_CPE_ID
6b39170c90 toolchain/nasm: fix PKG_CPE_ID
11b8b62fd8 tools/flex: fix PKG_CPE_ID
c587573710 tools/zlib: fix PKG_CPE_ID
b110c337d3 package/libs/pcre2: fix PKG_CPE_ID
318db3bde4 openssl: conditionally disable engine section
4aabbd6746 openssl: update to 3.0.14
2410b4c07b wolfssl: Update to 5.7.0
97c588e1ba wolfssl: update to 5.6.6
9ac1523062 mediatek: add Comfast CF-E393AX support
f377e7fade mediatek: add support for YunCore AX835
387e143c68 mediatek: add support for Adtran SmartRG Bonanza Peak series
e4015c446b uboot-envtools: filogic: reorder alphabetically
355bc644a9 kernel: backport some useful LED_FUNCTION_* defines for DT
85f3603047 generic: add more DT LED color and function definitions
f64576f367 mt76: update to Git HEAD (2024-04-03)
77354213b7 mediatek: add support for Zbtlink ZBT-Z8103AX
9988f8adf8 base-files: minor fix to mmc_get_mac_ascii function
4058d0e990 base-files: add mmc_get_mac_ascii function
46aa8c7732 mediatek: add kmod-usb3 to default package set of the ZBT-Z8102AX
866b1bb2b3 kernel: bump 5.15 to 5.15.161
1589572576 kernel: bump 5.15 to 5.15.160
cd2fdaf717 kernel: bump 5.15 to 5.15.159
a0d2ddac30 ipq40xx: eap1300: add eap1300ext as alt model

09a8f75077 wireless-regdb: update to 2024.05.08
a9e117e03f mt76: fix mt7603 compilation
e61f06c51d ipq806x: mr42/mr52: fix PCIe ports
2568b30285 mt76: backport mt7603 fixes important for its stability
ffd0074694 mt76: update to Git HEAD (2024-02-03)
a39e47e0c9 mt76: update to Git HEAD (2024-01-18)
01c58a0d2a kernel: bump 5.15 to 5.15.158
438e593f22 kernel: bump 5.15 to 5.15.157
fd42798fea kernel: bump 5.15 to 5.15.156
7a0d5a5c8b ipq40xx: Enable the Engenius EAP1300
66952b9ff4 ipq40xx: Properly set MAC addresses for the EAP1300
89088ba638 ipq40xx: convert Engenius EAP1300 to DSA
11b00344d1 ipq40xx: Enable NVMEM_U_BOOT_ENV config

06be957f86 mt76: update to Git HEAD (2023-12-08)
5c4c9ae059 mt76: update to the latest version
ec8f647d16 ipq806x: swap lan leds for Meraki MR52
eda76b336b gengetopt: backport patch fixing support for c++17
507f9439e7 lua: fix CVE-2014-5461
451b51f0dc kernel: bump 5.15 to 5.15.155
ed12436ee9 toolchain/gdb: backport patch for macOS to fix invalid range
2541ff391f procd: make mDNS TXT record parsing more solid
8695bc3442 Revert "uboot-mediatek: fix build on Mac OS X"
c19f5076a5 Revert "uboot-sunxi: add missing type __u64"
3d037b8c5f tools: macOS: types.h: fix missing unsigned types
7c7cc28485 toolchain: kernel-headers: remove debugging env dump
c3372266ba toolchain: kernel-headers: fix check target for external Git trees
c69482a912 mac80211: backport ieee80211_set_sband_iftype_data()
17501f822f mac80211: backport ieee80211_vif_is_mld()
a48786ef40 tools: b43-tools: fix compilation with GCC14
82ba1d2635 tools/cpio: update to 2.15
675d9a2d41 sunxi: fix network bringup on Olinuxino Micro boards
2b6b6e2f3c kernel: backport ipeth CDC NCM support
9b33b74ef7 bcm27xx: refresh kernel patches
afb5fdd79a netifd: packet-steering: silence error on applying queue mask
e8cc17e147 config: fix CONFIG_GDB appearing in main menuconfig menu
915dfbdbb1 config: select KERNEL_WERROR if building with default GCC version
33612fdb92 kernel: introduce KERNEL_WERROR config option
677ecd09d2 ipq40xx: whw03v2: enable additional 5 GHz channels
26e882f06f ipq807x: prpl-haze: enable LED driver on device tree
726d4be297 kernel: add kmod-leds-lp5562 and kmod-leds-lp55xx-common
f2366d75cf .gitignore: ignore link if target is included from feed
340e3dc453 build: fix kernel component in CycloneDX SBOM
5cae98c25d mvebu: puzzle-m90x: wipe rootfs_data on sysupgrade

817a1cb2bf sdk: include lib/crtsavres.o for powerpc
11d88dee1c kernel: backport upstream mediatek WED changes
afe2ddf827 mac80211: backport some upstream EHT patches
77b7c10884 realtek: support common GPIOs on D-Link DGS-1210-16
f314debd4f ath79: add support for Huawei AP5030DN
8f8d5decc9 kernel: bump 5.15 to 5.15.153
e2f3aefea5 mediatek: filogic: add Unielec U7981-01 support
705954a51a rockchip: remove redundant 'console' parameter from boot script
f90b1d9778 rockchip: remove 'swiotlb' parameter from boot script
26548c4254 unetd: update to Git HEAD (2024-03-31)
ecf390c8ff kernel: bump 5.15 to 5.15.152
6734cbd9f7 kernel: bump 5.15 to 5.15.151
0a2047cf77 kirkwood: add ix4-200d support to uboot-envtools

Update the broadcast AQL patch to include two patches fixing issues with
the initial revision.

Link: https://github.com/openwrt/openwrt/commit/1f5fd5cb971166ba57996d41b7ce71e697c186b2
Link: https://github.com/openwrt/openwrt/commit/163c87dfc20b1004be4e179fa5d59bb1c8925396



Signed-off-by: David Bauer <mail@david-bauer.net>

1bbb94df96 ramips: Add support for Cudy WR1300 v3
2f2eceab13 lantiq: Fix build after kernel 5.15.150
7f1d043b23 kernel: Remove unused schedulers
db7b247fa9 kernel: bump 5.15 to 5.15.150
3062b186bf kernel: Remove dsmark support
4c1d13e995 kernel: bump 5.15 to 5.15.149
0844937947 umdns: update to Git 7c675979 (2024-03-04)
6f70e09a00 mediatek: filogic: add support for Cudy RE3000 v1
97f6a6bfaa ath11k-firmware: Move to new upstream repository for board-2.bin
503f78f91c hostapd: fix 11r defaults when using WPA
e5a12edb88 hostapd: fix 11r defaults when using SAE

Excessive broadcast traffic with little competing unicast traffic can easily
flood hardware queues, leading to throughput issues. Additionally, filling
the hardware queues with too many packets breaks FQ for broadcast data.
Fix this by enabling AQL for broadcast packets.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David Bauer <mail@david-bauer.net>

78d493af22 generic l2tp: drop flow hash on forward
a2943e3795 generic vxlan: don't learn non-unicast L2 destinations
b30b1d3685 mediatek: filogic: Cudy WR3000 v1 wps button fix
e94052bfee mac80211: ath11k: sync with upstream

See Gluon #3191

Link: https://github.com/freifunk-gluon/gluon/issues/3191



Signed-off-by: David Bauer <mail@david-bauer.net>

Sometimes the build of flex fails with erros like these:

./build-aux/config.sub: line 63: opying: command not found

Disable the parallel build of flex in order to avoid these issues from
occuring.

Signed-off-by: David Bauer <mail@david-bauer.net>

Silence warnings for missing rate information.

These warnings do not provide value. Instead, they might rotate more
crucial information out of the kernel message ringbuffer.

Link: https://github.com/freifunk-gluon/gluon/issues/3160



Signed-off-by: David Bauer <mail@david-bauer.net>

3bf602d740 mac80211: avoid crashing on invalid band info
d4a21d75a9 mediatek: GL-MT6000: Add missing LED state definitions
0cd6b3fd0c linux/modules: remove deprecated module
40cfdf5ffe kernel: bump 5.15 to 5.15.146
6e39d2426b ramips: add support for D-Link COVR-X1860 A1
af7ef781ac ramips: add encrypted SGE factory image for D-Link devices
67d998e25d kernel: bump 5.15 to 5.15.145
b54f7105df firmware-utils: move patch to maintaince branch
34e30fb53a firmware-utils: bump to latest openwrt-23.05
e61d651053 ramips: correct the PCIe port number for Unielec u7621-01
80ef582dee rockchip: configure eth pad driver strength for orangepi r1 plus lts
9cd589bd79 ramips: lzma-loader: use default uart for rt305x
2216b10ebb ramips: lzma-loader: use proper register names
76f7dd3312 ramips: lzma-loader: use virtual memory segments for uart base address
23506e7789 raimps: mtk_eth_soc: drop rst_esw from ESW driver
0128d860a0 ramips: dts: mt7628an: reset FE and ESW cores together
ee4a042483 ramips: dts: rt5350: reset FE and ESW cores together
4e1bf2a50c ramips: dts: rt3050: reset FE and ESW cores together
88501f82f5 ramips: dts: rt3352: reset FE and ESW cores together
289515e003 ramips: mtk_eth_soc: wait longer after FE core reset to settle
8ce87267ba ramips: mtk_eth_soc: allow multiple resets
3aec71a176 mac80211: add missing newline for "min_tx_power"
c6425bb525 kernel: delete stray linux 6.1 patch
49bde57679 kernel: fix bridge proxyarp issue with some broken DHCP clients

Signed-off-by: Florian Maurer <f.maurer@outlook.de>

51881b2eb9 mediatek: add support for Routerich AX3000
18d7962f7b ramips: add support for Rostelecom RT-FE-1A
f6fb6bb2ba ramips: mt7621: use lzma-loader for Sercomm NA502
9a7b14dcfe mediatek: enable mt7981-wo-firmware package by default
9325da80ab mac80211: fix a race condition related to enabling fast-xmit
b0fc8b47e0 netifd: update to Git openwrt-23.05 (2024-01-04)
5cc1918a7a dropbear: increase default receive window size
60e49cf170 ramips: fix label-mac for Xiaomi RA75

The error handling needed for the buffer growth logic relies on
uloop_fd's error flag, which is set based on epoll events. Doing so
without handling recvmsg's error codes is racy, as an error state may be
set between receiving epoll events and the next recvmsg, but calling
recvmsg clears the error state.

To fix this, add handling for errors returned by nl_recvmsgs_default()
and nl_recv(); checking for u->error and retrieving the error status
using getsockopt() becomes redundant.

We have observed this issue on Gluon (recent OpenWrt 23.05); on some
devices with DSA switches, the bridge interface's carrier-on event would
consistenly get lost during boot due to insufficient buffer space
(see [1]).

We have bisected the issue to netifd commit 516ab774cc16 ("system-linux:
fix race condition on bringing up wireless devices"), but that commit only
uncovered the preexisting bug by switching from getting the carrier state
from sysfs to using the netlink messages in cb_rtnl_event().

I suspect that other recent issues about netifd missing a carrier state
change like [2] may have the same underlying cause.

[1] https://github.com/freifunk-gluon/gluon/issues/3130
[2] https://github.com/openwrt/openwrt/issues/13863



Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: David Bauer <mail@david-bauer.net>

Increasing the receive window size improves throughout on higher-latency
links such as WAN connections. The current default of 24KB caps out at
around 500 KB/s.

Increasing the receive buffer to 256KB increases the throughput to at
least 11 MB/s.

Signed-off-by: David Bauer <mail@david-bauer.net>

Frequent crashes have been observed on MT7916 based platforms. While the
root of these crashes are currently unknown, they happen when decoding
rate information of connected STAs in AP mode. The rate-information is
associated with a band which is not available on the PHY.

Check for this condition in order to avoid crashing the whole system.
This patch should be removed once the roout cause has been found and
fixed.

Closes: #2980
Link: https://github.com/freifunk-gluon/gluon/issues/2980



Signed-off-by: David Bauer <mail@david-bauer.net>

df580180d irqbalance: update to 1.9.3
023d6831a irqbalance: add banned_cpulist option
61ae8719f adblock-fast: bugfix: call to missing function
4f99ac645 ddns-scripts: Fix Route53 provider
f7d0beb26 ddns-scripts: add new DDNS provider ipnodns.ru
bf76672ac banip: update 0.9.2-4
e010d9d9f banip: update 0.9.2-3
01fca9e8b https-dns-proxy: fix unintentional call of service_stopped in boot()
183f008a4 sing-box: update to 1.6.6
a241e53ac rust: Update to 1.74.0
709456d06 adblock-fast: bufgix: fix boot()
22a1e22b2 https-dns-proxy: bugfix: prevent erros from boot()
c4315fc5e haproxy: update to v2.8.4
4e152bc41 dhtd: update to 0.2.4
f8918644c acme-acmesh: Update to 3.0.7
0bcd6bbc8 dnsproxy: Update to 0.59.0
f8cd88d0d tailscale: Update to 1.54.0
01bfe4f6b tailscale: Update to 1.52.1
906e4703f tailscale: Update to 1.50.1
625efd967 gummiboot: release bump
f9fa735ed netbird: update to version 0.24.2
481902f4e netbird: update to 0.23.9
91238177f netbird: update to 0.23.6
8d5ab4ca0 dhtd: update to 0.2.1
5ec47c5f1 dhtd: new package
cad16d24f crowdsec: new upstream release version 1.5.5
f9b6c2c5d pymysql: add meta-package for sha256 support
5453ca57c freeradius3: Fix build when pcre is present
413260559 golang: Update to 1.21.4
b2e8a5bdd adblock-fast: bugfix: ensure downloaded block-lists end with newline
11252ef64 banip: update 0.9.2-2
4c197c1a2 banip: release 0.9.2-1
8cf81bccd tang: set the right permissions to keys
660c30cc2 v2raya: Update to 2.2.4.1
98c281532 v2ray-core: Update to 5.11.0
4df5572bb adblock-fast: update to 1.0.1-1
6439078a9 php8: update to 8.2.12
b2cdb8f45 php8: fix linking on riscv64 platform (again)
7519f1ff1 crowdsec-firewall-bouncer: add ujail
d42ced507 perl: add support for riscv64

6264d12ed8 firmware-utils: update to Git HEAD (2023-11-21)
ebdaee7194 ramips: add support for Sercomm CPJ routers
fd277ee490 ramips: mt7620: drop unnecessary trailing tabs
a8f31d2aa1 ramips: sercomm.mk: make common recipe to set a bit in pid
dae399196b scripts: sercomm-pid.py: use uppercase hwid in pid
95ebd609ae kernel: bump 5.15 to 5.15.139
d6b62611b8 firmware-utils: package oseama
40bd2bb3d6 firmware-utils: new package replacing otrx
a39dca7ead kernel: bump 5.15 to 5.15.138
c7b6cfac40 scripts/dump-target-info.pl: add new function to DUMP devices
6cb1cb1b13 OpenWrt v23.05.2: revert to branch defaults
1c26bcb108 OpenWrt v23.05.2: adjust config defaults
842932a63d netifd: fix IPv4 route target masking
51bb178824 treewide: fix shell errors during dump stage
4637ba72b7 scan.mk: do not silence output of dump phase
b38b5c4299 ramips: add support for MeiG SLT866 4G CPE
ce62536aca uboot-envtools: add environment config for MeiG SLT866
03e26f856f kernel: support reading hex MAC address from NVMEM
a00fc406b9 kernel: add support MeigLink SLM828 modem
275f7e07ee ramips: cf-ew72-v2: Add support for COMFAST CF-EW72 V2
65bf66f727 ramips: Add support for ComFast CF-E390AX
ce62c25c08 OpenWrt v23.05.1: revert to branch defaults
a58a86693f OpenWrt v23.05.1: adjust config defaults
101988c61a scripts/getver.sh: prevent asking for negative rev-parse
b7e81d210b iptables: backport patch fixing bug with string module
3d006f95f2 wolfssl: update to 5.6.4
46385eb7f8 netifd: update to the latest version
11a41bc4b2 netifd: update to Git HEAD (2023-11-09)
f6a9f0c57b ipq-wifi: update to Git HEAD (2023-11-10)
2285eb732a ucode: update to Git HEAD (2023-11-07)
f5e9fd624d hostapd: refresh patches
85d1b43be4 hostapd: permit 40MHz in 802.1s only also for 2.4GHz g/n with noscan
1cab0d74b3 hostapd: permit also channel 7 for 2.5GHz to be set to HT40PLUS
c9e8453de7 hostapd: fix broke noscan option for mesh
2ef625e769 mac80211: fix not set noscan option for wpa_supplicant
5106f554bb px5g-wolfssl: Fix permission of private key
6fd16b0d27 px5g-mbedtls: Fix permission of private key
6de0e0d01a hostapd: use rtnl to set up interfaces
bbfb920e99 wifi: fix applying mesh parameters when wpa_supplicant is in use
f780cfb92f netifd: update to the latest version
d3c193525e mediatek: add CMCC RAX3000M support
429715a237 uboot-mediatek: add support for CMCC RAX3000M
b209f45640 arm-trusted-firmware-mediatek: add emmc/spim-nand ddr4 build for mt7981
04cde73d56 treewide: fix MERCUSYS brand spelling
3223f31fd3 mbedtls: Activate secp521r1 curve by default
cfadbc090c image: fix image generation within ImageBuilder

43e9cded06 mpc85xx: correct WS-AP3715i eth LED assignment
eda1545e6e hostapd: add missing NULL pointer check in uc_hostapd_iface_stop
6019945e96 hostapd: fix a crash when disabling an interface during channel list update
83bf45ea5c package: base-files: turn error into warning
829196e1b1 netifd: update to the latest version
09b9d732ec hostapd: use phy name for hostapd interfaces instead of first-bss ifname
8b385a45a6 mac80211: fix AP reconfiguration on DFS channels in non-ETSI regdomain
0d1859c258 netifd: update to the latest version
5e3f86a101 hostapd: select libopenssl-legacy for openssl variants
90d5961751 hostapd: remove eap-eap192 auth type value
6e09f88d29 netifd: update to the latest version
6798f156f9 hostapd: support eap-eap2 and eap2 auth_type values
98d0ee9dbf hostapd: fix FILS key mgmt type for WPA3 Enterprise 192 bit
a701e6e1c2 netifd: update to the latest version
9720b094ae hostapd: backport from master, including ucode based reload support
263583dc1e ubus: update to the latest version
9af2ad5111 ucode: update to the latest version
7e55f20c1f kernel: backport support for renaming netdevs while up
385a50f02d ipq40xx: fix image building for ZTE MF287 series
2dc284a79a ramips: RT1800: fix invalid octal number error
c3be832427 ath79: fix packetloss on some WLR-7100
d536f398eb kernel: ensure VFIO related suboptions are disabled
3c8825e5f8 kernel: enable vfio and vfio-pci for armsr-armv8
c79854e9fc kernel: vfio: remove unneeded enable_unsafe_noiommu_mode parameter
c90005c58a x86: remove built-in vhost-net driver
5edeb1ee0c kernel: add vhost-net module
6897270491 mvebu: add reset delays of PHYs for Fortinet FortiGate 50E
10aee60361 ipq806x: Correct OnHub sysupgrade config logic
6c60bbbc94 x86: geode: fix hwrng register accesses
6577b550df base-files: sysupgrade: Add 2 sec sleep into process KILL loop
0165daf569 uboot-envtools: ramips: add support for ALFA Network AX1800RM
3cc223243b ramips: add support for ALFA Network AX1800RM
a7449e5e95 arm-trusted-firmware-mediatek: fix hang on reboot on MT7622
0cb2ff5d08 uboot-mediatek: sync mtk-snand driver with SDK

cdc8470aec mac80211: fix MT7620 Wi-Fi channel scanning function
9df9126320 ramips: pinctrl: support requesting different functions for same group
4f1a7e8897 mac80211: rework MT7620 PA/LNA RF calibration
b2d264dc68 mediatek: mt7622: set DEVICE_DTC_ADDR for BPi-R64
a2ffbc8d16 arm-trusted-firmware-mediatek: enable built-in 2.5G PHY on MT7988
d052d409a0 uboot-mediatek: fix dependency on TF-A for MT7988 RFB (sdmmc)
3967c26974 mediatek: filogic: remove stray quote
625d19c1e2 generic: sync MediaTek Ethernet driver with upstream
230c09d203 mediatek: add support for Ubiquiti UniFi 6 LR v3
c8c1805100 uboot-mediatek: add builds for UniFi 6 LR v2 and v3
ed370ec424 mediatek: generate bootloader artifacts for mt7988_rfb
35d123adfe uboot-mediatek: build fully-featured U-Boot for MT7988 RFB
87ef305984 mediatek: improve mt7981.dtsi
ffede121f8 mediatek: filogic: improve pinctrl drivers
5a9720945f mediatek: i2c: mt65xx: allow optional pmic clock
88c12d6632 mediatek: re-add dropped properties on BPi-R3
cf08db988b generic: backport initial LEDs hw control support
e685162a78 kernel: bump 5.15 to 5.15.130
8bf25dba77 kernel: bump 5.15 to 5.15.129
3c1721ae03 kernel: bump 5.15 to 5.15.128
56827dac01 kernel: allow adding devices without hw offload to a hw flowtable
736e3b81aa urngd: update to the latest master
f493987d13 nettle: update to 3.9.1
b9c94686f7 Revert "ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01837"
104178a990 mt76: update to the latest version

Currently the build fails for the D-Link DIR-825 B1. THis is due to the
factory image being size-constrained. The sysupgrade image is not
affected, as OpenWrt now uses a concatenated firmware partition.

To newly install such a device, please use the latest OpenWrt 22.03
factory image and install a Gluon sysupgrade.

Signed-off-by: David Bauer <mail@david-bauer.net>

Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Tom Herbers <mail@tomherbers.de>

2034387af4 netfilter: fix typo in nf-socket and nf-tproxy kconfig
70e3f4e94d openssl: passing cflags to configure
287303b062 kernel: bump 5.10 to 5.10.184
920f2d9237 kernel: bump 5.10 to 5.10.183
ac5e37f832 kernel: bump 5.10 to 5.10.182
4b44bfe591 bcm63xx: fix NETGEAR DGND3700v2 boot loop
1a5e7d3f1c bmips: fix NETGEAR DGND3700v2 boot loop
e908856c43 kernel: mtd: bcm-wfi: add cferam name support
17f6001853 restool: update source.codeaurora.org repository link
ca669b7c07 ls-dpl: update source.codeaurora.org repository link
4a9eb94b5f bpf-headers: fix compilation with LLVM_IAS=1
afb4422702 openssl: bump to 1.1.1u
171b515192 kernel: bump 5.10 to 5.10.181
6bca11f496 kernel: bump 5.10 to 5.10.180
656e411454 ramips: add support for Keenetic Lite III rev. A
ce32068bf2 ca-certificates: Update to version 20230311
f4e4f5553d firmware: intel-microcode: update to 20230512
2c96dd6d4b firmware: intel-microcode: update to 20221108
3235300903 ipq-wifi: drop custom board-2.bins
b5a5751706 ipq40xx: R619AC: replace space with - separator in variant string
728afd14fa linux-firmware: move firmware file for mt7601u
9466152ea8 linux-firmware: update to 20230515
d2cc4ad326 linux-firmware: update to 20230310
320c919e39 linux-firmware: update to 20230117
b3ddc0941d linux-firmware: disable stripping
5fc704cdef linux-firmware: update to 20221214
d59e095fad linux-firmware: update to 20221109
ad3d63b273 linux-firmware: update to 20221012
91de737e9b linux-firmware: update to 20220913
d1365629e5 linux-firmware: update to 20220815
9c54ac6224 linux-firmware: Update to version 20220610
f3ccdf7ad6 linux-firmware: take linux-firmware.git's qca99x0 boardfile
8da1ba2c25 linux-firmware: Update to version 20220509
80fbad19ef ramips: correct page read return value of the mt7621 nand driver
80a99d9cf7 build: escape whitespaces in VERSION_DIST for Netgear images
30fca5413b fortify-headers: fix build error when _REDIR_TIME64 is not defined
4d6638464c fortify-headers: fix inconsistent time_t version of ppoll
695a22ab15 build: generate index.json

This disables A-MSDU support on mesh-links. This restores throughput on
mesh-links established between broken (ath10k) and correct (mt76)
implementations of mesh A-MSDU.

This patch can be dropped when switching to the next OpenWrt release, as
proper fixes have been applied.

Link: https://www.spinics.net/lists/linux-wireless/msg232410.html
Link: https://github.com/openwrt/mt76/issues/450



Signed-off-by: David Bauer <mail@david-bauer.net>

5f583d31c7 ramips: mt7621: add support for Cudy X6 v2

749cc6ffc4 ramips: Cudy X6 fixes / improvements