With the removal of ramips-rt305x, the last user of
GLUON_SPECIALIZE_KERNEL is gone.

VoCores aren't exactly useful mesh nodes except for experimentation.
They certainly aren't worth maintaining a whole target, in particular
one that has a WLAN driver not used by any other target.

A leading tab character usually marks recipe lines in Makefiles;
non-recipe lines must be indented using spaces.

The incorrect tab character doesn't seen to have caused any issues in
this case, but it should be fixed nonetheless, if only for consistency.

The file_contains_line helper function was not testing whether a file
exists or not prior attempting to read from it.

Add this check to circumvent errors on the private WiFi config in
case the hwflags file is missing.

Reported-by: Tom Herbers <freifunk@tomherbers.de>
Tested-by: Tom Herbers <freifunk@tomherbers.de>
Signed-off-by: David Bauer <mail@david-bauer.net>

The relevant entry for the primary MAC location was lost when rebasing
the patch on OpenWrt 21.02.

Fixes commit ded4b8a7 ("rockchip-armv8: add FriendlyARM NanoPi R2S")

Signed-off-by: David Bauer <mail@david-bauer.net>

Configure a radio for HE (802.11ax) operation in case it's supported by
the hardware. This can be the case for 2.4 GHz as well as 5 GHz.

Signed-off-by: David Bauer <mail@david-bauer.net>

Multi-port interfaces are stored in the network config as an array using
the ports key.

Single LAN and WAN interfaces are now stored in the network configs
"device" key.

read_stdout can return NULL and thus the return value need to be checked
prior to accessing it.

Signed-off-by: David Bauer <mail@david-bauer.net>

In case the limit_ingress or limit_egress options are not present in
gluon's mesh_vpn section the respondd provider compares a string literal
with a NULL pointer, crashing respondd.

Check both pointers prior to comparing them in order to mitigate this
issue.

Suggested-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: David Bauer <mail@david-bauer.net>

omit unlimited bandwidth limit
A value of '-' marks a streamdirection as unlimited.

This fully abstracts VPN methods, making gluon-mesh-vpn-fastd and
gluon-mesh-vpn-tunneldigger completely self-contained.

Provide a LUA interface for generic interacting with VPN methods in
gluon-mesh-vpn-core and web packages.

This also adds the ability to install tunneldigger and fastd to the same
image, selecting the VPN method based on the selected domain.

Signed-off-by: David Bauer <mail@david-bauer.net>

A missing uci save for gluon-setup-mode caused the initial setup-process
to be stuck in a config-mode loop.

Simplify the individual form providers by always running reconfigure. This
also commits all UCI packages, so we can remove all tracking of UCI
sections from the wizard code.

Instead of returning a list of packages to commit, the providers just
save their settings directly. Explicit runs of upgrade scripts are
removed, as they are now run by reconfigure.

This add support for a write() method on sections, in addition to the
value and form level write(). write() is only called when the section is
valid and visible. In addition, write() is empty by default, so it can be
overridden more easily.

Co-Authored-By: lemoer <git@irrelefant.net>

This is a preparation to use the gluon_wired.sh proto on top of
layer 3 tunnel interfaces.

Before this commit the decision whether a vxlan layer will be
introduced between the lower interface before the interface is
added to batman was inside the proto. Now the decision is moved
to the user of the proto.

Add a package for handling upgrade-scripts speific for the WAN radio
operation.

This way, the config mode interface can be removed seperately from the
core functionality to perform tasks on system upgrade. This can be
useful when the setup-mode is removed entirely for space preservation.

Drop these unused parameters in the function description, as only the
first parameter is referenced within the function block.

Allow the transmission of IPv6 multicast packets as long as they are not
flooded through the whole mesh.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

Set the ifname for the WAN radio (Private WLAN) to wanX, X being the
radio index.

All other radios created by Gluon already have their ifname defined
following this pattern.

Signed-off-by: David Bauer <mail@david-bauer.net>

The rudimentary flash size determination function expects the partition
for the devices firmware to be called "linux" while it is (since quite
some time) "firmware".

Fix this error to display available flash size as well as more useful
error message in case the uploaded firmware image exceeds the flash
space.

Signed-off-by: David Bauer <mail@david-bauer.net>

With batman-adv 2020.4 and the according backports to batman-adv v2019.2
several more bugs were found and fixed regarding the batman-adv
multicast optimizations feature.

Also a "wakeup-call" feature was added to the Linux bridge IGMP/MLD
snooping code in Gluon to work around issues with Android devices.

With batman-adv now at v2019.2, multicast-to-multi-unicasts conversion
is supported, too. Which means that even if there are a few outdated nodes
these and all other recipients will be served multicast packets via unicast,
too, as long as the sum of receiving nodes does not exceed the multicast
fanout setting (default: 16). If is exceeded, then batman-adv will revert
back to broadcast flooding automatically.

Long story short, with all these extra measures in place, let's reenable
the batman-adv multicast optimizations to reduce the layer 2 overhead
and in preparation for multicast applications in the future.

The default is enabled for this feature anyway, so removing the
"batctl multicast_mode 0" overwrite is sufficient.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
Signed-off-by: David Bauer <mail@david-bauer.net>