I made the mistake of never looking at the rendered version
fixes 95e5d382
backport like 8b2cc206 is optional

* add missing libelf-dev dependency (to build x86-64)
* remove subversion dependency
* add rsync dependency
* add ecdsautils to docs

This device is already supported.
It's a lantiq device that was entered as ar71xx
in to the list of supported device and therefore
removed before the release of Gluon 22.

Signed-off-by: David Bauer <mail@david-bauer.net>

Signed-off-by: Stefan Weil <sw@weilnetz.de>

The GL-MT1300 is a high-performance new generation pocket-sized router
that offers a powerful hardware and first-class cybersecurity protocol
with unique and modern design.

Specifications:
- SoC: MT7621A, Dual-Core @880MHz
- RAM: 256 MB DDR3
- Flash: 32 MB
- Ethernet: 3 x 10/100/1000: 2 x LAN + 1 x WAN
- Wireless: 1 x MT7615D Dual-Band 2.4GHz(400Mbps) + 5GHz(867Mbps)
- USB: 1 x USB 3.0 port
- Slot: 1 x MicroSD card slot
- Button: 1 x Reset button
- Switch: 1 x Mode switch
- LED: 1 x Blue LED + 1 x White LED

MAC addresses based on vendor firmware:
WAN : factory 0x4000
LAN : Mac from factory 0x4000 + 1
2.4GHz : factory 0x4
5GHz : Mac form factory 0x4 + 1

Flashing instructions:
1.Connect to one of LAN ports.
2.Set the static IP on the PC to 192.168.1.2.
3.Press the Reset button and power the device (do not release the button).
  After waiting for the blue led to flash 5 times, the white led will
  come on and release the button.
4.Browse the 192.168.1.1 web page and update firmware according to web
  tips.
5.The blue led will flash when the firmware is being upgraded.
6.The blue led stops blinking to indicate that the firmware upgrade is
  complete and U-Boot automatically starts the firmware.

add comments about lacking radios
Co-authored-by: Jan-Niklas Burfeind <git@aiyionpri.me>
Co-authored-by: Matthias Schiffer <mschiffer@universe-factory.net>

The activated setup mode is indicated by the WLAN LED.

Co-authored-by: David Bauer <mail@david-bauer.net>

Direct migration from 19.07 is currently not possible.

Gone due to
commit 45c84a11 ("ar71xx: drop target")

update lan, wan separation for o2 6431

Signed-off-by: Stefan Weil <sw@weilnetz.de>

The site.node_client_prefix6() is only used internally by the l3roamd
protocol. Therefore it is unnecessary to expose it to an administrator.

Instead, if node_client_prefix6 is unspecified in the site, generate an
IPv6 Unique Local Address prefix from the site domain_seed.

This updates the site documentation as well and marks this setting as
both optional and deprecated.

Note: If you had the node_client_prefix6 specified before and want to
use the new autogeneration from the domain_seed instead then this will
break compatibility and will need a gluon-scheduled-domain switch.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

Signed-off-by: David Bauer <mail@david-bauer.net>

Co-authored-by: Jan-Niklas Burfeind <git@aiyionpri.me>
fixed commit title

follow-up on

commit 854fef4e ("docs: consistently indent .rst files with 2 spaces")

These devices use all LAN ports as a WAN bridge.

Closes #2721

Signed-off-by: David Bauer <mail@david-bauer.net>

Signed-off-by: David Bauer <mail@david-bauer.net>

as well as the target itself

Co-authored-by: Jan-Niklas Burfeind <github@aiyionpri.me>

Signed-off-by: Richard Fröhning <misanthropos@gmx.de>

affected:
- CPE510
- WBS210
- Archer C50

Gone due to
commit 45c84a11 ("ar71xx: drop target")

AVM Fritz!Box 7520 and Fritz!Box 7530 use the same hardware platform and can
only be distinguished by using the urlader partition or the fritz-tffs tools
and read the ProductID (Fritz_Box_HW247).

Upstream added a standalone SPI kernel-loader which fixes the unbootable
image for the WDR4900. Thus, we can re-introduce this device to Gluon.

Signed-off-by: David Bauer <mail@david-bauer.net>

Signed-off-by: David Bauer <mail@david-bauer.net>