cdc907abed ath79: read back reset register
5ad05681f2 ath79: add support for UniFi UK-Ultra
e214118148 ath79: move UniFi AC template into common
4103958e76 mediatek: fix BPI-R3 wifi mac address
2fe497c4a5 mac80211: do not emit VHT160 capabilities if channel width is less than 160 MHz
9cd0023e54 hostapd: add missing NULL pointer check on radar notification

Signed-off-by: Florian Maurer <f.maurer@outlook.de>

3bf602d740 mac80211: avoid crashing on invalid band info
d4a21d75a9 mediatek: GL-MT6000: Add missing LED state definitions
0cd6b3fd0c linux/modules: remove deprecated module
40cfdf5ffe kernel: bump 5.15 to 5.15.146
6e39d2426b ramips: add support for D-Link COVR-X1860 A1
af7ef781ac ramips: add encrypted SGE factory image for D-Link devices
67d998e25d kernel: bump 5.15 to 5.15.145
b54f7105df firmware-utils: move patch to maintaince branch
34e30fb53a firmware-utils: bump to latest openwrt-23.05
e61d651053 ramips: correct the PCIe port number for Unielec u7621-01
80ef582dee rockchip: configure eth pad driver strength for orangepi r1 plus lts
9cd589bd79 ramips: lzma-loader: use default uart for rt305x
2216b10ebb ramips: lzma-loader: use proper register names
76f7dd3312 ramips: lzma-loader: use virtual memory segments for uart base address
23506e7789 raimps: mtk_eth_soc: drop rst_esw from ESW driver
0128d860a0 ramips: dts: mt7628an: reset FE and ESW cores together
ee4a042483 ramips: dts: rt5350: reset FE and ESW cores together
4e1bf2a50c ramips: dts: rt3050: reset FE and ESW cores together
88501f82f5 ramips: dts: rt3352: reset FE and ESW cores together
289515e003 ramips: mtk_eth_soc: wait longer after FE core reset to settle
8ce87267ba ramips: mtk_eth_soc: allow multiple resets
3aec71a176 mac80211: add missing newline for "min_tx_power"
c6425bb525 kernel: delete stray linux 6.1 patch
49bde57679 kernel: fix bridge proxyarp issue with some broken DHCP clients

Signed-off-by: Florian Maurer <f.maurer@outlook.de>

Signed-off-by: Magnus Frühling <skorpy@frankfurt.ccc.de>

The typo in the label name as been fixed, update the labeller config.

contrib: drop Gluon version from CI site

Drop the Gluon version reference from the site configuration used for
the CI builds.

These version indicators were most likely just copied from the example
site in the docs, where the version information makes sense. However,
the CI site is always built for a specific Gluon version and therefor
commit.

This avoids editing the version for each release.

Signed-off-by: David Bauer <mail@david-bauer.net>

Bumps [actions/upload-artifact](https://github.com/actions/upload-artifact) from 3 to 4.
- [Release notes](https://github.com/actions/upload-artifact/releases)
- [Commits](https://github.com/actions/upload-artifact/compare/v3...v4

)

---
updated-dependencies:
- dependency-name: actions/upload-artifact
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

modules: update to latest HEAD

b848b61 batman-adv: compat: Fix skb_vlan_eth_hdr conflict in stable kernels

4e1c175d4 strongswan: trigger reload when interfaces are specified
0f499ec4b sing-box: Update to 1.7.7
f971d88d5 django: bump to version 4.2.8
e96b6f648  banip: update 0.9.3-3
26373f845  banip: update 0.9.3-2
6435e15a2 banip: bump to release 0.9.3-1
06d1feb78 php8: update to 8.2.14
1e9d9f2b4 dnsproxy: Update to 0.61.0
75d9f3af9 yq: Update to 4.40.5
1b500425d v2ray-geodata: Update to latest version
ea1f30b6f v2ray-core: Update to 5.13.0
e60975e71 dnsproxy: Update to 0.60.1
e95f8c8de tailscale: Update to 1.56.1
5b9ae50b2 wsdd2: update to 2023-12-21
73062e624 mosquitto: update to 2.0.18
515b0f92e nebula: update to 1.8.1
5b4067ccb libxcrypt: update to 4.4.36
9e7371ed5 libtorrent-rasterbar: Update to 2.0.9

51881b2eb9 mediatek: add support for Routerich AX3000
18d7962f7b ramips: add support for Rostelecom RT-FE-1A
f6fb6bb2ba ramips: mt7621: use lzma-loader for Sercomm NA502
9a7b14dcfe mediatek: enable mt7981-wo-firmware package by default
9325da80ab mac80211: fix a race condition related to enabling fast-xmit
b0fc8b47e0 netifd: update to Git openwrt-23.05 (2024-01-04)
5cc1918a7a dropbear: increase default receive window size
60e49cf170 ramips: fix label-mac for Xiaomi RA75

The Gluon Tunneldigger protocol handler hasn't received the care and
attention a core package, especially a VPN protocol, should.

Due to the works in #2102 it's no longer required to maintain
VPN handlers in the Gluon Core and they can be instead included via a
package feed.

Users who wish to continue using a supported core Gluon package are
encouraged to take a look at fastd in conjunction with it's null@l2tp method.
It offers roughly the same performance (it's using the same principle
of operation) and supports connections via IPv6 as a bonus.

In general it should be possible to change the VPN used protocol
asynchronously with a normal update.

If Gluon users wish to continue using tunneldigger the recomendation
is to participate in the development of tunneldigger inside our
community-packages.

Co-authored-by: David Lutz <kpanic@kpanicroom.de>

Bumps [sphinx](https://github.com/sphinx-doc/sphinx) from 7.1.2 to 7.2.6.
- [Release notes](https://github.com/sphinx-doc/sphinx/releases)
- [Changelog](https://github.com/sphinx-doc/sphinx/blob/master/CHANGES.rst)
- [Commits](https://github.com/sphinx-doc/sphinx/compare/v7.1.2...v7.2.6

)

---
updated-dependencies:
- dependency-name: sphinx
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [docker/setup-qemu-action](https://github.com/docker/setup-qemu-action) from 2 to 3.
- [Release notes](https://github.com/docker/setup-qemu-action/releases)
- [Commits](https://github.com/docker/setup-qemu-action/compare/v2...v3

)

---
updated-dependencies:
- dependency-name: docker/setup-qemu-action
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [docker/setup-buildx-action](https://github.com/docker/setup-buildx-action) from 2 to 3.
- [Release notes](https://github.com/docker/setup-buildx-action/releases)
- [Commits](https://github.com/docker/setup-buildx-action/compare/v2...v3

)

---
updated-dependencies:
- dependency-name: docker/setup-buildx-action
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Bumps [docker/metadata-action](https://github.com/docker/metadata-action) from 5.2.0 to 5.4.0.
- [Release notes](https://github.com/docker/metadata-action/releases)
- [Commits](https://github.com/docker/metadata-action/compare/e6428a5c4e294a61438ed7f43155db912025b6b3...9dc751fe249ad99385a2583ee0d084c400eee04e

)

---
updated-dependencies:
- dependency-name: docker/metadata-action
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

Signed-off-by: David Bauer <mail@david-bauer.net>

Signed-off-by: Magnus Frühling <skorpy@frankfurt.ccc.de>

* docs: user/site: add missing image-customization example

* doc: user/site: improve wording of image customization section

Also add a link to the examples section.

openwrt: backport patches for v2023.2 release

The error handling needed for the buffer growth logic relies on
uloop_fd's error flag, which is set based on epoll events. Doing so
without handling recvmsg's error codes is racy, as an error state may be
set between receiving epoll events and the next recvmsg, but calling
recvmsg clears the error state.

To fix this, add handling for errors returned by nl_recvmsgs_default()
and nl_recv(); checking for u->error and retrieving the error status
using getsockopt() becomes redundant.

We have observed this issue on Gluon (recent OpenWrt 23.05); on some
devices with DSA switches, the bridge interface's carrier-on event would
consistenly get lost during boot due to insufficient buffer space
(see [1]).

We have bisected the issue to netifd commit 516ab774cc16 ("system-linux:
fix race condition on bringing up wireless devices"), but that commit only
uncovered the preexisting bug by switching from getting the carrier state
from sysfs to using the netlink messages in cb_rtnl_event().

I suspect that other recent issues about netifd missing a carrier state
change like [2] may have the same underlying cause.

[1] https://github.com/freifunk-gluon/gluon/issues/3130
[2] https://github.com/openwrt/openwrt/issues/13863



Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: David Bauer <mail@david-bauer.net>

Increasing the receive window size improves throughout on higher-latency
links such as WAN connections. The current default of 24KB caps out at
around 500 KB/s.

Increasing the receive buffer to 256KB increases the throughput to at
least 11 MB/s.

Signed-off-by: David Bauer <mail@david-bauer.net>

readthedocs: update to Python 3.11

.readthedocs.yaml is how the file is mentioned in the docs. Adjust the
name.

The latest Sphinx versions require at least 3.9.

docs: remove an unrelated/misleading link and fix headings

This was an idea (thought experiment?) from a Wireless Battlemesh ages
ago between batman-adv devs. Regarding what could be done to interconnect
isolated/separate WiFi mesh clouds on layer 3 without losing best path
metric information, without worsening/compromising on the best route decision.
And as a more sophisticated approach to the batman-adv gateway feature and
a potential replacement for tunneled batman-adv over VPN connections.

Which is the opposite of what the sentence in this Gluon README
is saying. And this never got implemented in either batman-adv nor Gluon.

Therefore removing this link to this old draft page.

The newly added information is way too verbose and non-practical for a
"Getting started". Therefore adding an "Overview" heading and moving the
"Getting started" back to where it originally was.

This adds a hint to the Repository on Github and makes it easier to recognize the license text

Goal is to cancel Worfklows for Pull Request if they become obsolte
due to new changes.
Without this workflows will continue running, wasting resources and
delaying the run of relevant workflows.
This situation will typically occour if a author of a PR notices an
error/typo/missing bit and pushes new changes to the branch.

This won't affect concurrent workflows for otherwise triggered
workflows (push, workflow_dispatch, tag, ...).

build: implement flexible site-selection system

This package allows to easily select the correct libustream implementation
without all communities having the need to manually change their included
packages.

Signed-off-by: David Bauer <mail@david-bauer.net>