5d30ff1bc6 ramips: correct R6220 button flag
9834c3dae0 kernel: fix LED netdev trigger on interface rename
799de7c641 build: cleanup possibly dangling Python 3 host symlink
785d4f3efd build: fixup python SetupHostCommand to use python2
502c4a81d3 expat: Update to version 2.2.9
9943506816 tools/e2fsprogs: Update to version 1.45.4
569bec190c curl: bump to 7.66.0
5fc63ec8a4 ath79: disable building future NAND images for GL-AR300M/GL-AR750S
2b4d9b6850 mac80211 ath9k: force QCA953x clock to 25MHz
b3514e3569 ar71xx: improve support for TP-Link CPE510 v2
0c9be4f76b gitignore: ignore patches in OpenWrt root directory
112df2ac56 OpenWrt v19.07.0-rc1: revert to branch defaults
88bff692a5 OpenWrt v19.07.0-rc1: adjust config defaults
c4fdb377a2 Revert "ipq806x: fix EA8500 switch control"
d7ea380363 ath10k-firmware: update Candela Tech firmware images
c5d5cdb759 ustream-ssl: backport fix for CVE-2019-5101, CVE-2019-5102
439ac8104b mac80211: rt2x00: backport upstream patches

This limits the line-length for the ATH10K package
definitions.

Fixes f49813b5

This removes the unused package definitions, as otherwise the Lua linter
will complain.

Hardware specification:
- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q64CSIG (8MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) QCA9563 integrated (3x3)
  - 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: There's no UART header on the board

With the removal of IBSS support, Gluon doesn't use ath10k-ct anymore, so
we can drop this patch.

As upstream now has model detection for the Ubiquiti UniFi AC LR, we
need to provide an autoupdater image matching the expected filename.

Closes #1834

Drop IBSS support

It seems the CT variant was used for 11s meshing on x86 by accient. Switch
to non-CT to match the other targets.

We don't support VLANs on 11s interfaces, so the workaround can be dropped
with the IBSS support.

As of OpenWrt commit b3d8b3ab8e6f ("mac80211: set noscan=1 if sta/adhoc/
mesh interfaces are present"), the issue workarounded by this patch cannot
occur anymore.

many AVM devices do not have RESET/WPS buttons. So use the otherwise unused DECT/PHONE button to boot the device into setup mode.

This patch allows to enter the setup-mode by pressing the phone button
(often labeled as DECT) in addition to WPS and reset button.

This patch is necessary to allow supporting boards without a WPS and reset
button (e.g. AVM FRITZ!Box 7312).

This commit removes the broken flag for the ipq806x-generic target,
as the first device (NETGEAR R7800) now has full support in Gluon

d6d9f58290 ipq806x: use switch trigger for WAN LED on NETGEAR boards
bee28adf6e hostapd: enable PMKSA and OK caching for WPA3-Personal
5d6308ecae scripts/dl_github_archive.py: fix python3 str, bytes confusion

Fixes: 4249d65a ("treewide: fix luacheck warnings")
Closes: #1851

This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")

This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")

22c443c20c uboot-fritz4040: build with ipq40xx "generic" subtarget
7407e72399 ipqx0xx: add Generic subtarget
9b2a147cfe ramips: enable external amplifier for D-Link DIR-810L
e539dc2daa ath79: Clean up GL-AR300M DTS/DTSI inclusions
8f0deedc11 ramips: fix WiFi MAC addresses for D-Link DIR-810L
f051a967b8 libevent2: Update to 2.1.11
466d499d03 rpcd: update to latest Git HEAD
7f29dc0fda kernel: bump 4.14 to 4.14.151
2436e521b4 kernel: mark kmod-usb-serial-wwan as hidden
79e6391600 kernel: bump 4.14 to 4.14.150
c51a39d4a5 mac80211: add an improved moving average algorithm to minstrel

Their kernel partition is too small, the OpenWrt build system
is unable to create an image.

This changes the ath10k firmware and driver selection, as
ath10k-ct is now the default in upstream OpenWrt.

However, for 802.11s operation we need the QCA firmware and driver.

With this commit, the status-led is set to be the "led-running"
device-tree alias for targets which do not implement the get_status_led
method in /etc/diag.sh.

This is necessary, as wpad-basic conflicts with hostapd-mini.

Upstream commit 5eb7864a changed the method name for host-key
generation.

This adds previously absent ath10k packages definitions. This way,
devices correctly select CandelaTech firmware correctly, when
GLUON_WLAN_MESH is set to IBSS.

This is also necessary for all devices, when OpenWrt is switched to
19.07.

fixes #1834
fixes #1332