Direct migration from 19.07 is currently not possible.

Gone due to
commit 45c84a11 ("ar71xx: drop target")

(cherry picked from commit a18510c0)

add comments about lacking radios
Co-authored-by: Jan-Niklas Burfeind <git@aiyionpri.me>
Co-authored-by: Matthias Schiffer <mschiffer@universe-factory.net>

(cherry picked from commit 0cdaeaa0)

update lan, wan separation for o2 6431

(cherry picked from commit f5a41dd3)

Co-authored-by: Jan-Niklas Burfeind <git@aiyionpri.me>
fixed commit title

(cherry picked from commit 84a76af8)

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 7d9d8cb6)

as well as the target itself

(cherry picked from commit a8dc2345)

Co-authored-by: Jan-Niklas Burfeind <github@aiyionpri.me>
(cherry picked from commit 68bec1f0)

Signed-off-by: Richard Fröhning <misanthropos@gmx.de>
(cherry picked from commit 5a651742)

Gone due to
commit 45c84a11 ("ar71xx: drop target")

(cherry picked from commit bc09b7ec)

AVM Fritz!Box 7520 and Fritz!Box 7530 use the same hardware platform and can
only be distinguished by using the urlader partition or the fritz-tffs tools
and read the ProductID (Fritz_Box_HW247).

(cherry picked from commit 5888a50c)

Signed-off-by: David Bauer <mail@david-bauer.net>

The GL-MT1300 is a high-performance new generation pocket-sized router
that offers a powerful hardware and first-class cybersecurity protocol
with unique and modern design.

Specifications:
- SoC: MT7621A, Dual-Core @880MHz
- RAM: 256 MB DDR3
- Flash: 32 MB
- Ethernet: 3 x 10/100/1000: 2 x LAN + 1 x WAN
- Wireless: 1 x MT7615D Dual-Band 2.4GHz(400Mbps) + 5GHz(867Mbps)
- USB: 1 x USB 3.0 port
- Slot: 1 x MicroSD card slot
- Button: 1 x Reset button
- Switch: 1 x Mode switch
- LED: 1 x Blue LED + 1 x White LED

MAC addresses based on vendor firmware:
WAN : factory 0x4000
LAN : Mac from factory 0x4000 + 1
2.4GHz : factory 0x4
5GHz : Mac form factory 0x4 + 1

Flashing instructions:
1.Connect to one of LAN ports.
2.Set the static IP on the PC to 192.168.1.2.
3.Press the Reset button and power the device (do not release the button).
  After waiting for the blue led to flash 5 times, the white led will
  come on and release the button.
4.Browse the 192.168.1.1 web page and update firmware according to web
  tips.
5.The blue led will flash when the firmware is being upgraded.
6.The blue led stops blinking to indicate that the firmware upgrade is
  complete and U-Boot automatically starts the firmware.

This device is already supported.
It's a lantiq device that was entered as ar71xx
in to the list of supported device and therefore
removed before the release of Gluon 22.

(cherry picked from commit 95e5d382)

add link to issue #2672 in known issues section of the release notes

(cherry picked from commit fd213e71b96f489eeedb2ec25152d4faa015ba4e)

Co-authored-by: Andreas Ziegler <dev@andreas-ziegler.de>

The command was introduced in v2022.1 with #2459.

Co-authored-by: Jan-Niklas Burfeind <github@aiyionpri.me>
(cherry picked from commit b4f174a4)

(cherry picked from commit 33fa77a7)

(cherry picked from commit 267124b5)

Upstream added a standalone SPI kernel-loader which fixes the unbootable
image for the WDR4900. Thus, we can re-introduce this device to Gluon.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 301443da)

(cherry picked from commit 3ab8007a)

(cherry picked from commit dd30a6e6)

Signed-off-by: David Bauer <mail@david-bauer.net>

Signed-off-by: David Bauer <mail@david-bauer.net>

Signed-off-by: David Bauer <mail@david-bauer.net>

Specification:

SoC: MediaTek MT7628AN
RAM: 64MiB
Flash: 8MiB
Wifi:
  - 2.4GHz: MT7628AN
  - 5GHz: MT7612EN
LAN: 1x 10/100 Mbps

Flash instructions:
Flash factory image through stock firmware WEB UI.
Back to stock is possible by using TFTP and stripping down the Firmware
provided by TP-Link to a initramfs.

The flash space between 0x650000 and 0x7f0000
is blank in the stock firmware so I left it out as well.

Co-authored-by: Christoph Krapp <christoph.krapp@power.cloud>

- explain what happens on gluon-reconfigure
- show workflow to alter the wired network config
- update examples
- update 'has changed in' section

resolves #2474

Co-authored-by: Tom Herbers <mail@tomherbers.de>
Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: Andreas Ziegler <dev@andreas-ziegler.de>

Co-authored-by: Tom Herbers <mail@tomherbers.de>
Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: Andreas Ziegler <dev@andreas-ziegler.de>

Gone due to
commit 45c84a11 ("ar71xx: drop target")

closes freifunk-gluon/gluon#2603

Co-authored-by: Martin Weinelt <martin@darmstadt.freifunk.net>