Specify conffiles for our packages, so they aren't overwritten during
opkg updates. While this only matters during development, it is
unintended to have different behaviour for opkg update and full firmware
updates.

The PHY lookup helper "find_phy_by_path" could not lookup the PHY name
for paths from multi-phy devices.

An example for such a path would be:
'1e140000.pcie/pci0000:00/0000:00:01.0/0000:02:00.0+1'

The integer after the plus (+) character determines the PHY index of the
specific device in relation to the PHY with the lowest index of the
device.

For example, if the device provides phy2 and phy3, the above path would
describe phy3. In case the device provides phy0 and phy1, it would
describe phy1.

Rewrite the "find_phy_by_path" function to support those paths as well
as regular device paths in a universal manner.

Signed-off-by: David Bauer <mail@david-bauer.net>

[Matthias Schiffer: simplify close_fds() helper and use in child process]

Delete all default network device sections upon first boot.

Only LAN & WAN networks are defined at this point. We are using the
legacy way of definiting bridges via the interface sections ifname
option.

The prior filtering was based upon a single device and didn't take into
consideration that DSA interface names can be named arbitrarily.

Signed-off-by: David Bauer <mail@david-bauer.net>

With the removal of ramips-rt305x, the last user of
GLUON_SPECIALIZE_KERNEL is gone.

VoCores aren't exactly useful mesh nodes except for experimentation.
They certainly aren't worth maintaining a whole target, in particular
one that has a WLAN driver not used by any other target.

Installing the script into the image allows site checks to run for
manual package installations via opkg.

The file_contains_line helper function was not testing whether a file
exists or not prior attempting to read from it.

Add this check to circumvent errors on the private WiFi config in
case the hwflags file is missing.

Reported-by: Tom Herbers <freifunk@tomherbers.de>
Tested-by: Tom Herbers <freifunk@tomherbers.de>
Signed-off-by: David Bauer <mail@david-bauer.net>

The relevant entry for the primary MAC location was lost when rebasing
the patch on OpenWrt 21.02.

Fixes commit ded4b8a7 ("rockchip-armv8: add FriendlyARM NanoPi R2S")

Signed-off-by: David Bauer <mail@david-bauer.net>

Configure a radio for HE (802.11ax) operation in case it's supported by
the hardware. This can be the case for 2.4 GHz as well as 5 GHz.

Signed-off-by: David Bauer <mail@david-bauer.net>

Multi-port interfaces are stored in the network config as an array using
the ports key.

Single LAN and WAN interfaces are now stored in the network configs
"device" key.

This is a preparation to use the gluon_wired.sh proto on top of
layer 3 tunnel interfaces.

Before this commit the decision whether a vxlan layer will be
introduced between the lower interface before the interface is
added to batman was inside the proto. Now the decision is moved
to the user of the proto.

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>
Signed-off-by: David Bauer <mail@david-bauer.net>

No package uses l2tp_ip.

This device is a dual 5GHz device. It is recommended to manually change the
radio of the first device to the lower 5GHz channels and the second radio
to the upper 5GHz channels

This adds the OpenWrt label-mac device selection as the most preferred
fallback.

While this is only used on OpenWrt 19.07 for backports, we can also use
the label-mac device when backporting device support. This way, we have
to deal with less device-sepcific code downstream.

Signed-off-by: David Bauer <mail@david-bauer.net>

This commit introduces a simple function for writing to the syslog and
replaces the custom function used by gluon-hoodselector.

CPU: 750 MHz QCA9563
Flash: 8 MB
RAM: 64 MB
Radio 1: Qualcomm Atheros QCA9563 (b/g/n)
Radio 2: Qualcomm Atheros QCA9887 (a/n/ac)

Specifications:
* SoC: MT7620A
* RAM: 64 MB DDR
* Flash: 8MB NOR SPI flash
* WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz)
* LAN: 1x100M

The -factory images can be flashed from the device's web
interface or via nmrpflash.

Both devices differ by a additional power outlet for the EX3800.
This patch has been tested on a EX3800 device.

* gluon-core: remove obsolete file 100-core-reset-sysctl

* gluon-core: remove obsolete cleanup line

* gluon-client-bridge: remove obsolete cleanup line

This renames the local_client zone to loc_client, as local_clint exceeds
the maximum zone length allowed for firewall3, which is 11 bytes.

This worked previously due to firewall3 using unsafe string operations.
Now creation of the chain fails (latest OpenWrt master).

Signed-off-by: Jan-Tarek Butt <tarek@ring0.de>

Reorder scripts so that the mesh_lan interface is accounted for.

Two other firewall upgrade scripts (mesh-babel and l3roamd) are
reordered as well. While there seems to be no hard dependency at the
moment, it makes sense to run the basic setup first, also to avoid
problems with future changes.

Closes: #2090
Fixes: ed094bc6 ("gluon-core: firewall: Allow custom gluon_wired interfaces (#2041)")

This will hide the outdoor mode setting on compatible devices in case
the defined channels should be preserved.

Otherwise a user might be under the impression their device is compliant
with outdoor operation when in reality it still uses prohibited
channels.

(cherry picked from commit 73b830eb)

This will hide the outdoor mode setting on compatible devices in case
the defined channels should be preserved.

Otherwise a user might be under the impression their device is compliant
with outdoor operation when in reality it still uses prohibited
channels.

When gluon.core.switch_domain is set, it replaces the old domain.

This also replaces an unnecessary uci:commit() with uci:save().