patches/packages/gluon/0001-uradvd-adjust-preferred-lifetime-to-0.patch

+From: Nico <github@nicoboehr.de>
+Date: Thu, 3 Jun 2021 20:31:55 +0000
+Subject: uradvd: adjust preferred lifetime to 0
+
+When we announce a prefix from nodes which has a preferred lifetime
+of nonzero, clients can use this prefix as a source IP address.
+
+As we announce the same prefix for every segment, this won't work. Hence,
+set the preferred lifetime to 0 so nobody ever uses it as a source IP.
+
+diff --git a/net/uradvd/src/uradvd.c b/net/uradvd/src/uradvd.c
+index f6549f249518714e3d9210708b54cc23d85b26df..0edcfdcc02c3c1d513413d8cb580880e4ef9eab6 100644
+--- a/net/uradvd/src/uradvd.c
++++ b/net/uradvd/src/uradvd.c
+@@ -62,7 +62,7 @@
+ 
+ /* These are in seconds */
+ #define AdvValidLifetime 86400u
+-#define AdvPreferredLifetime 14400u
++#define AdvPreferredLifetime 0u
+ #define AdvDefaultLifetime 0u
+ #define AdvCurHopLimit 64u
+ #define AdvRDNSSLifetime 1200u

patches/packages/packages/0002-fastd-remove-random-delay-on-inital-handshake.patch

+From: Nico <github@nicoboehr.de>
+Date: Mon, 26 Apr 2021 14:12:43 +0000
+Subject: fastd: remove random delay on inital handshake
+
+When a peer limit is defined, fastd will by default randomly delay
+the inital handshake. As our gateways delay their handshake to
+better distribute their load, this is undesireable.
+
+diff --git a/net/fastd/patches/0100-remove-random-delay-on-inital-handshake.patch b/net/fastd/patches/0100-remove-random-delay-on-inital-handshake.patch
+new file mode 100644
+index 0000000000000000000000000000000000000000..40ca26812bda65d8b08a1034e23d1b2335c77259
+--- /dev/null
++++ b/net/fastd/patches/0100-remove-random-delay-on-inital-handshake.patch
+@@ -0,0 +1,23 @@
++--- a/src/peer.c
+++++ b/src/peer.c
++@@ -322,19 +322,11 @@ static void reset_peer(fastd_peer_t *pee
++ 
++ /**
++    Starts the first handshake with a newly setup peer
++-
++-   If a peer group has a peer limit the handshakes will be delayed between 0 and 3 seconds
++-   make the choice of peers random (it will be biased by the latency, which might or might not be
++-   what a user wants)
++ */
++ static void init_handshake(fastd_peer_t *peer) {
++-	unsigned delay = 0;
++-	if (has_group_config_constraints(peer->group))
++-		delay = fastd_rand(0, 3000);
++-
++ 	peer->state = STATE_HANDSHAKE;
++ 
++-	fastd_peer_schedule_handshake(peer, delay);
+++	fastd_peer_schedule_handshake(peer, 0);
++ }
++ 
++ /** Handles an asynchronous DNS resolve response */

targets/ath79-generic

+-- modify kernel builds slightly to work around a boot hang on various device
+-- based on the QCA9563 SoC - especially the Unifi AC-* devices
+config('KERNEL_AIO', true)
+
 local ATH10K_PACKAGES_QCA9880 = {
 	'kmod-ath10k',
 	'-kmod-ath10k-ct',
@@ -14,7 +18,13 @@ local ATH10K_PACKAGES_QCA9887 = {
 	'-ath10k-firmware-qca9887-ct',
 }
 
-local ATH10K_PACKAGES_QCA9888 = {}
+local ATH10K_PACKAGES_QCA9888 = {
+	'kmod-ath10k',
+	'-kmod-ath10k-ct',
+	'-kmod-ath10k-ct-smallbuffers',
+	'ath10k-firmware-qca9888',
+	'-ath10k-firmware-qca9888-ct',
+}
 
 -- ALFA NETWORK
 
@@ -106,6 +116,13 @@ device('d-link-dir825b1', 'dlink_dir-825-b1', {
 	},
 })
 
+device('d-link-dir-825-rev-c1', 'dlink_dir-825-c1', {
+	factory = false,
+	manifest_aliases = {
+		'd-link-dir-825-rev-c1', -- Upgrade from OpenWrt 19.07
+	},
+})
+
 
 -- Enterasys
 
@@ -433,6 +450,10 @@ device('tp-link-eap225-outdoor-v1', 'tplink_eap225-outdoor-v1', {
 	packages = ATH10K_PACKAGES_QCA9888,
 })
 
+device('tp-link-eap225-outdoor-v3', 'tplink_eap225-outdoor-v3', {
+	packages = ATH10K_PACKAGES_QCA9888,
+})
+
 device('tp-link-re355-v1', 'tplink_re355-v1', {
 	manifest_aliases = {
 		'tp-link-re355', -- upgrade from OpenWrt 19.07

targets/ipq40xx-generic

-local ATH10K_PACKAGES_IPQ40XX = {}
-local ATH10K_PACKAGES_IPQ40XX_QCA9888 = {}
+local ATH10K_PACKAGES_IPQ40XX = {
+	'kmod-ath10k',
+	'-kmod-ath10k-ct',
+	'-kmod-ath10k-ct-smallbuffers',
+	'ath10k-firmware-qca4019',
+	'-ath10k-firmware-qca4019-ct',
+}
+local ATH10K_PACKAGES_IPQ40XX_QCA9888 = {
+	'kmod-ath10k',
+	'-kmod-ath10k-ct',
+	'-kmod-ath10k-ct-smallbuffers',
+	'ath10k-firmware-qca4019',
+	'-ath10k-firmware-qca4019-ct',
+	'ath10k-firmware-qca9888',
+	'-ath10k-firmware-qca9888-ct',
+}
 
 
 defaults {

targets/ipq806x-generic

@@ -4,7 +4,7 @@
 -- The QCA9984 on the other hand works fine for 11s meshes on both bands.
 
 local QCA9980_PACKAGES = {'-kmod-ath10k', 'kmod-ath10k-ct', '-ath10k-firmware-qca99x0', 'ath10k-firmware-qca99x0-ct'}
-local QCA9984_PACKAGES = {}
+local QCA9984_PACKAGES = {'kmod-ath10k', '-kmod-ath10k-ct', 'ath10k-firmware-qca9984', '-ath10k-firmware-qca9984-ct'}
 
 
 --