Now that OpenWrt implements a proper fix for the stalled boots on 74kc
boards, the previous workaround can be removed.

Signed-off-by: David Bauer <mail@david-bauer.net>

This is a temporary measure that fixes #2692.

This reverts commit 15ef8858.

add comments about lacking radios
Co-authored-by: Jan-Niklas Burfeind <git@aiyionpri.me>
Co-authored-by: Matthias Schiffer <mschiffer@universe-factory.net>

It looks like boot hangs on an AC-Mesh for unknown reasons. The last
message seen on the console is:

    [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)

But interestingly, it seems like enabling AIO somehow works around this
problem. Changing any off the following options seem to have the same
effect at the moment for Linux 5.10.160+5.10.161

    # CONFIG_KERNEL_AIO is not set
    # CONFIG_KERNEL_CGROUPS is not set
    # CONFIG_KERNEL_FANOTIFY is not set
    # CONFIG_KERNEL_FHANDLE is not set
    # CONFIG_KERNEL_IO_URING is not set
    # CONFIG_KERNEL_IPV6_MROUTE is not set
    # CONFIG_KERNEL_IPV6_SEG6_LWTUNNEL is not set
    # CONFIG_KERNEL_IP_MROUTE is not set
    CONFIG_KERNEL_PROC_STRIPPED=y

Just enable CONFIG_AIO until the actual problem was fixed.

Link: https://github.com/freifunk-gluon/gluon/issues/2784

update lan, wan separation for o2 6431

We migrate to dnsmasq-full, while disabling most of its features.
Notably, dhcp and dnssec are compiled in, while other features of the
full variant are deselected.

Signed-off-by: David Bauer <mail@david-bauer.net>

Co-authored-by: Jan-Niklas Burfeind <git@aiyionpri.me>
fixed commit title

Co-authored-by: Jan-Niklas Burfeind <github@aiyionpri.me>
removed x86-legacy, added ramips-mt7621

The main difference between the non-EFI and EFI images generated by
OpenWrt is that the former uses an MS-DOS partition table, while the
latter uses GPT. The EFI images still have a BIOS-compatible MBR, so
they work fine on non-EFI systems.

Closes #2403

as well as the target itself

targets without usb-support fail to build without this change

Co-authored-by: David Bauer <mail@david-bauer.net>

Co-authored-by: Jan-Niklas Burfeind <github@aiyionpri.me>

Signed-off-by: Richard Fröhning <misanthropos@gmx.de>

fixes OOM reboots due too limited ram with ath10k 5Ghz enabled
add some comments to describe the need for ath10k-ct replacement
tested stable on an TP-Link Archer C25v1
more details
https://github.com/openwrt/openwrt/commit/694757a08f620a9f24b70003542d9dcd0abeac46

Gone due to
commit 45c84a11 ("ar71xx: drop target")

AVM Fritz!Box 7520 and Fritz!Box 7530 use the same hardware platform and can
only be distinguished by using the urlader partition or the fritz-tffs tools
and read the ProductID (Fritz_Box_HW247).

Upstream added a standalone SPI kernel-loader which fixes the unbootable
image for the WDR4900. Thus, we can re-introduce this device to Gluon.

Signed-off-by: David Bauer <mail@david-bauer.net>

Ubiquiti Nanostation Loco M XW was renamed in v2022.1.x, but the alias to the old name was missing, so devices running the old release did not update.

Support for the device was (re)added in #2455
(merged as 94e04393)

Signed-off-by: David Bauer <mail@david-bauer.net>

Specification:

SoC: MediaTek MT7628AN
RAM: 64MiB
Flash: 8MiB
Wifi:
  - 2.4GHz: MT7628AN
  - 5GHz: MT7612EN
LAN: 1x 10/100 Mbps

Flash instructions:
Flash factory image through stock firmware WEB UI.
Back to stock is possible by using TFTP and stripping down the Firmware
provided by TP-Link to a initramfs.

The flash space between 0x650000 and 0x7f0000
is blank in the stock firmware so I left it out as well.

Co-authored-by: Christoph Krapp <christoph.krapp@power.cloud>

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Note: Buffalo has introduced hardware changes without bumping the
revision number. 19.07 did not support the rb-variant so there's no need
to implement a migration for the rb-variant.
Every g300nh supported by Gluon should either be the s-variant or
been flashed wrongly.

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")