The Linksys E4200 v2 uses mwl8k wifi, which does not support 11s.

Signed-off-by: Richard Fröhning <misanthropos@gmx.de>

Debugging binaries in images that are built with sstrip is extremely
annoying, as not even objdump will work on them.

Switching from sstrip to standard strip increases the ath79 image size
(for some usual Archer C7 v2 configuration I used for testing) by ~70KiB,
or 1.3% of the rootfs size (~1% of the total image size), which is
rarely worth the decreased debuggability.

Extend GLUON_DEBUG to not only distinguish 0 and 1, such that:

- 0 uses sstrip same as before
- 1 switches to regular strip; this is the new default
- 2 includes all debug info, like GLUON_DEBUG=1 did before

The model name has a codename suffix:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-e4200-v2.dts;h=bfd708a677c96a9f3bdf80ead2db4498487ac5f8;hb=refs/heads/openwrt-23.05#l6

The Archer C7 v2 needs a different factory image depending on the region
(EU or US); this got lost during the ar71xx -> ath79 migration.

The OpenWrt factory image without a region suffix is only installable on
very old TP-Link firmwares from before the region split was introduced.
The region-specific firmware works for both old and new TP-Link firmwares.

Fixes: 8fdda51f ("ath79-generic: (re)add support for archer-c7-v2 (#2437)")

Signed-off-by: Richard Fröhning <misanthropos@gmx.de>

Signed-off-by: Richard Fröhning <misanthropos@gmx.de>

This device was supported before the target-migration to ath79.

Building this package breaks the builds. We do not require it, thus we
can simply disable it.

Signed-off-by: David Bauer <mail@david-bauer.net>

upstream increased partition size to 7.625 MiB
https://github.com/openwrt/openwrt/commit/aca8bb5cc332f0ffdf4249e76b0a56716f98bef0

The Fritz!Box 7520/7530 received DSL support in OpenWrt 23.05
remove obsolete dsl packages

ltq-vdsl-app was renamed to ltq-vdsl-vr9-app
https://github.com/openwrt/openwrt/commit/33e2115fe449d1b9e97ce8c5be96f580442fd3d9
ltq-dsl-base is a new package that was added with 23.05

We don't employ swap using zram anymore with Gluon. Thus, we can disable
SWAP in the kernel.

Signed-off-by: David Bauer <mail@david-bauer.net>

add new lines
rename OEMs

Omit manifest aliases for versions whose upgrade path is no longer supported
Add comment to two manifest aliases regarding the version

Signed-off-by: Florian Maurer <f.maurer@outlook.de>

Co-authored-by: David Lutz <kpanic@kpanicroom.de>

Known issues:

* 11s is not working
* has no reset button, only SSH access, serial access or an external SD
  card update can return it to config mode at the moment
* LED: generally the red sys LED is working, including boot and failsafe
  blink patters, but:
  * sometimes not lit after boot
  * not blinking in config mode; instead sometimes either persistently on
    and sometimes persistently off after booting into config mode

Therefore adding it as broken.

However, due to its CPU power and small size still interesting as a VPN
offloader or WiFi rooftop core node (e.g. to Gluon'ify 5+60GHz devices).

Manifest aliases are added for upgrades from unreleased Gluon builds
and can be removed again at some point in the future.

Tested on a Raspberry Pi 4 Model B Rev 1.1.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

Similar to x86 build images with a squashfs instead of ext4 filesystem
on bcm27xx / for the Raspberry Pi. This allows to use sysupgrade
properly and allows to use the firstboot command.

Runtime tested on a Raspberry Pi 4. Build tested for the Pi 3 / bcm2710.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

As the boardname-based image name setting was broken for bcm27xx due to the
target rename, we need to keep the model-based names updated for now.

Add all model strings currently seen on the Multimeshviewer and update
the comments accordingly.

Signed-off-by: David Bauer <mail@david-bauer.net>

BROKEN TARGETS were built when BROKEN was set as a variable regardless of
it's value. Even an empty BROKEN variable caused BROKEN TARGETS to be
built. For DEVICES the number was evaluated and compared to true by Lua.

Make behavior consistent for relevant values UNSET/EMPTY/0 and 1:
UNSET/EMPTY/0: Don't build BROKEN TARGETS and DEVICES
1: Build BROKEN TARGETS and DEVICES

The behavior remains inconsistent for all positive numbers except 1.
(even floating point)

Add MediaTek driver packages for MT7915 as well as MT7921 WiFi 6 cards.
In addition, fix the mt7615 package name, as the driver was seperated
into kernel and firmware packages.

Signed-off-by: David Bauer <mail@david-bauer.net>

Remove due to ticket #2939

These devices risk being bricked in a way that can not be recovered
without running full TFTP or serial recovery, as the flash ends up in a
read-only state with no way of upgrading to a fixed version.

Thus, remove the support for the time being. Don't just flag them as
BROKEN, as this would deliberately brick these boards when installating
such an image.

Signed-off-by: David Bauer <mail@david-bauer.net>

This removes the BROKEN flag from the lantiq-xrx200 target.
The issues with the switch-driver have been resolved upstream

Link: https://github.com/openwrt/openwrt/pull/13638



Signed-off-by: David Bauer <mail@david-bauer.net>