bc7abe8729f3 include/kernel-build.mk: fix kernel rebuild on backport patch changes
c99c70e05303 kernel: backport page fragment API changes from 4.10+ to 4.9

Do not break the build on kernel 4.9 (ar71xx).

514a4b3e1b4e include/feeds.mk: rework generation of opkg distfeeds.conf
3e89f58a5ead base-files: fix feed list in PKG_CONFIG_DEPENDS
7fa7c854fe33 include/feeds.mk: always add available feeds to PACKAGE_SUBDIRS
a5b9553cf592 scripts/feeds: add src-dummy method
2f306873efbe ramips: TP-Link TL-WR902AC v3: add missing wps button
36a4681b2bef ramips: TP-Link TL-WR902AC v3: don't build factory image
ca903c73c705 kernel: bump 4.14 to 4.14.54 for 18.06
3a5498c5e55d kernel: bump 4.9 to 4.9.111 for 18.06
27014da237f1 mac80211: Expose support for ath9k Dynack
5a40fad22a39 kernel: bcm47xxpart: fix getting user-space data partition name

ath10k has to switch the regulatory domain when switching the default
country when ATH_USER_REGD is enabled. This is for example important when
switching from country US (FCC) to DE (ETSI). The ath implementation will
use ath_reg_dyn_country_user_allow to check if this is allowed.

Unfortunately, this function always seems to return false to
ath_reg_notifier_apply even when ATH_USER_REGD is enabled. But it must
actually always accept the requests from the user (when ATH_USER_REGD is
enabled) to correctly set the conformance test limits in the ath10k binary
blob.

Not doing it will sometimes allow too high transmit powers on edge channels
for correctly calibrated devices outside their default regulatory domain.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

Closes #844

Fixes #961

Backport a few patches to allow sysupgrades on mmcblk and similar block
devices.

Fixes #975

The  assignment of the gpio_count and reg_base in ath79_gpio_output_select
takes care that only supported platforms can use ath79_gpio_output_select.
But the rebase of the patches after the last OpenWrt base update
accidentally added an extra check for the SoC which was missing support
soc_is_qca955x().

Boots on QCA955X devices which were using ath79_gpio_output_select stopped
with

    Kernel bug detected[#1]:
    [...]
    Call Trace:
    [<803e6174>] ath79_gpio_output_select+0x30/0xe8
    [<803ed590>] om5p_acv2_setup+0x24/0x200
    [<803e4dc0>] ath79_setup+0x28/0x38
    [<80069ac8>] do_one_initcall+0x148/0x1ec
    [<803e2cc4>] kernel_init_freeable+0x150/0x208
    [<80065218>] kernel_init+0x10/0x114
    [<80060878>] ret_from_kernel_thread+0x14/0x1c

Fixes: a22c1d56 ("Update OpenWrt base")
Signed-off-by: Sven Eckelmann <sven@narfation.org>

Fixes: 212c38f0 "ar71xx: add model detection for UBNT Rocket Ti"

Some (possibly broken) bootloaders incorrectly initialize the at8033 phy.
This breaks auto-negotation on these SGMII devices. The mode has therefore
to be set back in to a valid configuration by Linux.

Fixes #911

Fixes #897

Fixes the Ubiquiti UAP Outdoor+ HSR.

Using HTTPS breaks the download on Debian Wheezy. The switch was an
unintended side effect of the backport from LEDE.

Also, fix the commit message of the backport patch (mwlwifi is not updated
anymore since the last OpenWrt base upgrade).

Fixes #919

Tested-by: Jannis Pinter <jannis@pinterjann.is>

The downgraded version of ath9k was reported to cause issues with Windows
clients before. Remove the problematic patch.

In addition, the temperature compensation support patch is reverted.

It seems that newer mac80211 version are less stable, so we downgrade it
for now.

This probably doesn't affect Gluon as nothing is using recvmmsg, but it's
still a good idea to get this fixed ASAP.