Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>

Removed in 45c84a11 ("ar71xx: drop target").

Re-add mikrotik target

Note that previous images were generic ones and as such no migration
path is provided other than manually flashing the image via config-mode.

- [x] Must be flashable from vendor firmware
  - [x] Web interface
  - [ ] TFTP (untested, but possible according to OpenWrt wiki)
  - [ ] Other: <specify>
- [x] Must support upgrade mechanism
  - [x] Must have working sysupgrade
    - [x] Must keep/forget configuration (`sysupgrade [-n]`, `firstboot`)
  - [x] Gluon profile name matches autoupdater image name
        (`lua -e 'print(require("platform_info").get_image_name())'`)
- [x] Reset/WPS/... button must return device into config mode
- [x] Primary MAC address should match address on device label (or packaging)
      (https://gluon.readthedocs.io/en/latest/dev/hardware.html#notes)
  - When re-adding a device that was supported by an earlier version of Gluon, a
    factory reset must be performed before checking the primary MAC address, as
    the setting from the old version is not reset otherwise.
- Wired network
  - [x] should support all network ports on the device
  - [x] must have correct port assignment (WAN/LAN)
    - On devices supplied via PoE, there is usually no explicit WAN/LAN labeling on the hardware.
      The PoE input should be the WAN port in this case.
- Wireless network (if applicable)
  - [x] Association with AP must be possible on all radios
  - [x] Association with 802.11s mesh must work on all radios
  - [x] AP+mesh mode must work in parallel on all radios
- LED mapping
  - Power/system LED
    - [x] Lit while the device is on
    - [x] Should display config mode blink sequence
          (https://gluon.readthedocs.io/en/latest/features/configmode.html)
  - Radio LEDs
    - [x] Should map to their respective radio
    - [x] Should show activity
  - Switch port LEDs
    - [x] Should map to their respective port (or switch, if only one led present)
    - [x] Should show link state and activity

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Replace most of the page to account for the changes that have happened
in Gluon and OpenWrt in the last 4 years:

- Switch from Shell-based target definition language to Lua
- Removal of targets using legacy build code

Closes #2360

Co-authored-by: Ilja Gerhardt <ilja@cryptix.net>

Co-authored-by: Ilja Gerhardt <ilja@cryptix.net>

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Remove support for the TP-Link WDR4900, as it us currently unable to
load its kernel sure to factory bootloader constraints.

Progress on this topic is tracked in #2491

The mpc85xx-generic target was renamed to mpc85xx-p1010 in OpenWrt
21.02. The target name in Gluon docs was never adjusted however.

Signed-off-by: David Bauer <mail@david-bauer.net>

Gone due to
commit 45c84a11 ("ar71xx: drop target")

https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=86e7353bff2a5de257de8ec62e782f016eed143c



Co-authored-by: Tom Herbers <mail@tomherbers.de>

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Changed subtarget in between, similar change in
commit bed66fa2 ("ath79: move GL.iNet GL-AR750S to NAND subtarget")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

This adds support for the Sophos RED 15w rev.1 gateway.

It is a branch-office SD-WAN device based on the P1014 networking SoC.

Signed-off-by: David Bauer <mail@david-bauer.net>