The Aruba Instant On AP11 is the Aruba AP-303 with a stripped-down
firmware. Add an alias for the device to remove confusion about the
different naming.

Remove the ath10k-ct-smallbuffers variant from the default
package-seleciton as it clashes with the QCA ath10k driver.

Flash instructions in the OpenWRT Commit: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=eae6cac6a30b95bef04d033ed8a303b7e35a078b

a regular Netgear WNDR3800
but identifies itself as wndr3800chmychart.

The devolo WiFi pro 1200i lost it's ath10k package definitions while
rebasing, thus selecting the wrong package set.

Fix it by adding the correct firmware and driver.

This limits the line-length for the ATH10K package
definitions.

Fixes f49813b5

This removes the unused package definitions, as otherwise the Lua linter
will complain.

Hardware specification:
- SOC: Qualcomm QCA9563 @ 775MHz
- Flash: GigaDevice GD25Q64CSIG (8MiB)
- RAM: Zentel A3R1GE40JBF (128 MiB DDR2)
- Ethernet: Qualcomm QCA8337N: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) QCA9563 integrated (3x3)
  - 5GHz (ac) Qualcomm QCA9886 (2x2)
- Button: 1x power, 1x reset, 1x wps
- LED: 6x LEDs: power, wlan2g, wlan5g, lan, wan, wps
- UART: There's no UART header on the board

As upstream now has model detection for the Ubiquiti UniFi AC LR, we
need to provide an autoupdater image matching the expected filename.

Closes #1834

It seems the CT variant was used for 11s meshing on x86 by accient. Switch
to non-CT to match the other targets.

This commit removes the broken flag for the ipq806x-generic target,
as the first device (NETGEAR R7800) now has full support in Gluon

This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")

This commit accounts for the target renaming which was done in upstream
commit 7407e723991 ("ipqx0xx: add Generic subtarget")

Their kernel partition is too small, the OpenWrt build system
is unable to create an image.

This changes the ath10k firmware and driver selection, as
ath10k-ct is now the default in upstream OpenWrt.

However, for 802.11s operation we need the QCA firmware and driver.

This is necessary, as wpad-basic conflicts with hostapd-mini.

This adds previously absent ath10k packages definitions. This way,
devices correctly select CandelaTech firmware correctly, when
GLUON_WLAN_MESH is set to IBSS.

This is also necessary for all devices, when OpenWrt is switched to
19.07.

fixes #1834
fixes #1332

The OCEDO Koala was missing the correct package definition. Because of
this, firmware is potentially built with the wrong ath10k firmware /
driver.