From testing the previous behavior of ghost-acks could not be reproduced
anymore.

Signed-off-by: David Bauer <mail@david-bauer.net>

c06d4df974 mac80211: set basic-rate for mesh interfaces
0c52c9d6fc ath79: reset ETH switch for AR9344
50dcebeb8a OpenWrt v24.10.0-rc5: revert to branch defaults
3d17274ca8 OpenWrt v24.10.0-rc5: adjust config defaults
6dacba30a7 mediatek/filogic: add support for Cudy AP3000 v1
d92fc99360 mediatek: Fix U-Boot variables handling for D-Link M30 A1
785ea040ec mac80211: rt2x00: some improvements for rt5592
b8c53881db mac80211: rt2x00: some improvements for mt7620
5679b7aef6 mac80211: rt2x00: some improvements for rt2800 generic
e63d289bbd realtek: trim default package selection
8931d617dd ath79: Push MV88E6060 DSA switch into package
e80b7a63f1 ixp4xx: Break out mv88e6060 DSA switch to package
3d0ed57b16 mediatek: append metadata to factory-uboot.bin for WSR devices
deb0f28b5e lantiq: xrx200: add support for lan3 and lan4 on AVM 5490/5491
8b5f3ee940 base-files: strip space and tab characters from ASCII mac address
676dfd1363 base-files: enable get_mac_ascii() to handle redundant strings
b0261c3861 uboot-mediatek: add missing LED command for OpenWrt One
d543a9ae66 uboot-mediatek: fix Routerich AX3000 support patch
976bfe61e0 ramips: mtk-mmc: remove nt76x8 pinctrl hack
09378395cd ramips: make package kmod-sdhci-mt7620 conflict with kmod-mmc-mtk
f311c9754c ramips: fix SDXC function for mt76x8 one eth port devices
f81f707c05 ramips: add back SDXC card reader support for HiWiFi HC5x61A
4d9b06c571 ramips: mmc-mtk: add more vendor driver register init values
cc733e7e2a ramips: mt762{0,8}: reduce default MMC clock to 24 MHz
fe8812ab96 bcm27xx: remove duplicated kmod-rp1-pio package
096e3f26ef rockchip: enable USB3 port on NanoPC T6
767ad64921 rockchip: backport recent rk3588 clk updates
7a112661d5 bcm27xx/bcm2712: Fix-up RP1 modules
2f60e7f006 wifi-scripts: fix setting tx power on some drivers
6ba1f831c7 mt76: update to Git HEAD (2025-01-04)
56b2d856a2 generic: 6.6: backport upstream r8169 patches
56b19f0d50 generic: 6.6: backport upstream Realtek PHY patches
111c62a06a rockchip: refresh patch
cf887640a3 mbedtls: Deactivate ARIA block cipher by default
993ade9eb3 config: enable SECCOMP support for loongarch64
43e1b47d70 procd: update to Git HEAD (2024-12-22)
14722242af rockchip: fix phy reset on rk356x
09fcac8bc0 kernel: bump 6.6 to 6.6.69
bbfebf8527 kernel: add workaround for page_pool_release warnings
9b9622271e ipq40xx: fix label MAC address for FritzBox 7520/7530
efebdf077c ubus: update to Git HEAD (2025-01-02)
184d1c93cb config: rename SECCOMP to USE_SECCOMP
933ae0699a build: remove targetinfo invalidation based on .config
19db092082 linux: fix missing default packages in profiles.json
c22410e7a9 imagebuilder: move handling of DEFAULT_PACKAGES into shareable place
f97e729f8c build: fix including busybox, procd and apk/opkg in imagebuilder
83afb428b0 build: remove broken dependency of metadata on toplevel .config variables
85d1d03cab mt76: update to Git HEAD (2025-01-03)
3ad92b68f1 mt76: update to Git HEAD (2024-12-30)
3bd2962c3d mac80211: update to version 6.12.6
5330f62085 mac80211: refresh patch for ath12k
369d2f3bf9 realtek: add 1920-24g-poe-180w to mac address
d5f01971f7 realtek: drop extraneous ')' in 02_network
36f7db978a ramips: mt7621: enable lzma-loader for Amped Wireless ALLY
f91d8e9f37 trusted-firmware-a.mk: fix release download URL
b80de63e9f mediatek: filogic: add KTD2026/7 driver to Acer Connect Vero W6m
35e02b31c0 generic: add missing CONFIG_LEDS_KTD202X symbol
a9ddc7432a generic: backport support for KTD2026/7 rgb(w) led controller
812046971e mediatek: Fix primary MAC of D-Link M60
a2b1aaee80 realtek: add support for HPE 1920-24G PoE-180W (JG925A)
32981677bd tools/dwarves: update to v1.28
7a0b76cf0f bpftool: Update to v7.5.0
b66773aac3 libbpf: Update to v1.5.0
11275bec82 realtek: add support for HPE 1920-24G-PoE-370w
1f94fa16d8 realtek: rtl838x: refactor hpe_1920-24g dts
67e070c11b kernel: bump 6.6 to 6.6.68
1eff737906 ipq40xx: orbi: add ethernet0 alias
9a0a05d52a busybox: fix LTO compiler flags
dad450b115 bcm27xx-utils: update to latest version
d1dd5b2301 bcm27xx-gpu-fw: update to v1.20241126
684223c4a4 bmips: pinctrl-bcm63268: add gpio function
4b4f319931 Revert "bmips: drop macronix nand block protection patch"
3a5584e0df bcm27xx: pull 6.6 patches from RPi repo
cccc7651ec bcm27xx/bcm2712: add RP1 drivers via kmods
17752bd9ce kernel: bcm27xx/bcm2712: add RP1 functionality
f4c5d0e77e bcm27xx: patches: cherry-pick for RP1 kmods
3ca3ee6012 bmips: drop macronix nand block protection patch
76a546a83a kernel: generic: patch: 802.2+LLC - set transport_header offset
5b4a081f47 octeon: add kmod-usb-dwc3-octeon to DEFAULT_PACKAGES
47e3413f6b kernel: add kmod-usb-dwc3-octeon
7cbaa9e81f netfilter: fix bogus reference to `kmod-nf-conntrack-timeout`
90f84a22b0 mvebu: fix Linksys power LED

Signed-off-by: Florian Maurer <f.maurer@outlook.de>

With the update to OpenWrt 24.10 the bridge MLD wakeup call feature was
removed. However the issue with Android devices and MLD is still
present. Therefore readding the bridge MLD wakeup call patch and porting
it to Linux 6.6 / OpenWrt 24.10.

Link: https://issuetracker.google.com/issues/149630944


Fixes: b7481fd0 ("modules: switch to OpenWrt 24.10")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

7ee4fe770 CI: multi-arch-test-build: move to shared workflow
a94b703f8 openwisp-monitoring: allow not depending on rpcd-mod-iwinfo
452e1bfd6 openwisp-monitoring: fix Makefile for 0.2.0 update
e7c336c18 openwisp-config: fix Makefile for 1.1.0

dced292d68 OpenWrt v23.05.5: revert to branch defaults
28cf53e6bd OpenWrt v23.05.5: adjust config defaults
10cc5fcd00 build: align SOURCE path for build system and SDK
87fbb5085d ipq40xx: re-add label MAC address for FritzBox 4040
a2a67804fc firmware-utils: bump to latest openwrt-23.05
ace013101c realtek: 5.15: backport VLAN fix
8e75eed617 ath79: fix I2C pins on GL-AR750
4d4d260f5b ramips: tp-link er605-v2: Remove sysupgrade-tar image
66055df3e0 ucode: another fix for host installation
dd4b05ee8a ipq40xx: add PoE passthrough GPIO
4d7ad37891 ramips: mt7621: use lzma-loader for Sercomm NA502s
e3bb35811e lldpd: fix reload bug: advertisements shall default to on
0b48b832a9 lldpd: extended interface(s) parsing to handle patterns
7ee813b3ef lldpd: make management address advertisement controllable
af6a852ced lldpd: make capabilities advertisement controllable
cec02193d5 lldpd: note about capabilities
ca0c2363c2 lldpd: fix restart
3d3dad61b2 lldpd: update URL
d7765c488c lldpd: shellcheck fixes
601bbdda6a lldpd: implement lldp_policy parameter
56675166e8 lldpd: Implement location parameter
7542e7927b lldpd: fix error "sh: XXXms: bad number"
b886948692 lldpd: refactor out ifaces derivation; reuse function
74581b02b2 lldpd: remove unneeded quotes
8766fed5cd lldpd: remove unneeded quotes and variable quoting
64b38f3bd5 lldpd: remove unneeded quotes and variable quoting
89759ee4bb lldpd: remove unneeded quotes and variable quoting
50135a03a6 lldpd: remove unneeded quotes
4446346fdd lldpd: remove unneeded quotes and variable quoting
b1ddf0a859 lldpd: fix a paste error from commit 1be2088a5247b2cfabe8be991c1e52ddaf780a16
c0217ef8f8 lldpd: spell fixes
1d14e0abfc lldpd: fix -k 'lldp_no_version' row
4ebd60b083 lldpd: add option to force EDP
13193cb070 lldpd: only use snmp options when compiled in
02e3845890 lldpd: Update Makefile package release
a7f749ded4 lldpd: add option for tx delay and tx hold
b2008404ab lldpd: add option to set system platform
18fc86a0f5 lldpd: add option to force SONMP enabled
1201a69664 lldpd: add option to force FDP on
d6da0952ab lldpd: set CDP version and allow forcing CDP on
7f58fc14d8 lldpd: allow disabling LLDP protcol
ed3f182d63 lldpd: add portidsubtype option
6cbc100762 lldpd: add agent-type option
be4824977b lldpd: add LLDP MED options
15e6259231 lldpd: option to disable LLDP-MED inventory TLV
59ad77faba lldpd: Init adds no-version option
1d83e4c5ed lldpd: Allow neighbour filtering
f79ab96312 lldpd: LLDPD binds to only specified interfaces
b0f991d03c lldpd: Init config read on reload
8f714af40b lldpd: add lldp_syscapabilities config option
3b85719b62 ucode: fix missing backslash
461102d99c ncurses: Fix path in ncursesw.pc
b1858ffbf3 build: autoconf: set ac_cv_func_setresuid=true
912acb6c09 filogic: add missing 2.5G PHY LEDs configuration for Zyxel EX5700
7e42fdcafe mac80211: Update to version 6.1.110-1
4fa16c1e24 openssl: update to 3.0.15
a0ebff651d mbedtls: Update to 2.28.9
8e5e62416f kernel: bump 5.15 to 5.15.167
fd6e077ddf kernel: bump 5.15 to 5.15.166
bad01d4806 kernel: bump 5.15 to 5.15.165
cc938b18a8 ucode: fix host installation
ee3efefc5e treewide: fixup models names for UniFi U6 series

09a8f75077 wireless-regdb: update to 2024.05.08
a9e117e03f mt76: fix mt7603 compilation
e61f06c51d ipq806x: mr42/mr52: fix PCIe ports
2568b30285 mt76: backport mt7603 fixes important for its stability
ffd0074694 mt76: update to Git HEAD (2024-02-03)
a39e47e0c9 mt76: update to Git HEAD (2024-01-18)
01c58a0d2a kernel: bump 5.15 to 5.15.158
438e593f22 kernel: bump 5.15 to 5.15.157
fd42798fea kernel: bump 5.15 to 5.15.156
7a0d5a5c8b ipq40xx: Enable the Engenius EAP1300
66952b9ff4 ipq40xx: Properly set MAC addresses for the EAP1300
89088ba638 ipq40xx: convert Engenius EAP1300 to DSA
11b00344d1 ipq40xx: Enable NVMEM_U_BOOT_ENV config

06be957f86 mt76: update to Git HEAD (2023-12-08)
5c4c9ae059 mt76: update to the latest version
ec8f647d16 ipq806x: swap lan leds for Meraki MR52
eda76b336b gengetopt: backport patch fixing support for c++17
507f9439e7 lua: fix CVE-2014-5461
451b51f0dc kernel: bump 5.15 to 5.15.155
ed12436ee9 toolchain/gdb: backport patch for macOS to fix invalid range
2541ff391f procd: make mDNS TXT record parsing more solid
8695bc3442 Revert "uboot-mediatek: fix build on Mac OS X"
c19f5076a5 Revert "uboot-sunxi: add missing type __u64"
3d037b8c5f tools: macOS: types.h: fix missing unsigned types
7c7cc28485 toolchain: kernel-headers: remove debugging env dump
c3372266ba toolchain: kernel-headers: fix check target for external Git trees
c69482a912 mac80211: backport ieee80211_set_sband_iftype_data()
17501f822f mac80211: backport ieee80211_vif_is_mld()
a48786ef40 tools: b43-tools: fix compilation with GCC14
82ba1d2635 tools/cpio: update to 2.15
675d9a2d41 sunxi: fix network bringup on Olinuxino Micro boards
2b6b6e2f3c kernel: backport ipeth CDC NCM support
9b33b74ef7 bcm27xx: refresh kernel patches
afb5fdd79a netifd: packet-steering: silence error on applying queue mask
e8cc17e147 config: fix CONFIG_GDB appearing in main menuconfig menu
915dfbdbb1 config: select KERNEL_WERROR if building with default GCC version
33612fdb92 kernel: introduce KERNEL_WERROR config option
677ecd09d2 ipq40xx: whw03v2: enable additional 5 GHz channels
26e882f06f ipq807x: prpl-haze: enable LED driver on device tree
726d4be297 kernel: add kmod-leds-lp5562 and kmod-leds-lp55xx-common
f2366d75cf .gitignore: ignore link if target is included from feed
340e3dc453 build: fix kernel component in CycloneDX SBOM
5cae98c25d mvebu: puzzle-m90x: wipe rootfs_data on sysupgrade

817a1cb2bf sdk: include lib/crtsavres.o for powerpc
11d88dee1c kernel: backport upstream mediatek WED changes
afe2ddf827 mac80211: backport some upstream EHT patches
77b7c10884 realtek: support common GPIOs on D-Link DGS-1210-16
f314debd4f ath79: add support for Huawei AP5030DN
8f8d5decc9 kernel: bump 5.15 to 5.15.153
e2f3aefea5 mediatek: filogic: add Unielec U7981-01 support
705954a51a rockchip: remove redundant 'console' parameter from boot script
f90b1d9778 rockchip: remove 'swiotlb' parameter from boot script
26548c4254 unetd: update to Git HEAD (2024-03-31)
ecf390c8ff kernel: bump 5.15 to 5.15.152
6734cbd9f7 kernel: bump 5.15 to 5.15.151
0a2047cf77 kirkwood: add ix4-200d support to uboot-envtools

1bbb94df96 ramips: Add support for Cudy WR1300 v3
2f2eceab13 lantiq: Fix build after kernel 5.15.150
7f1d043b23 kernel: Remove unused schedulers
db7b247fa9 kernel: bump 5.15 to 5.15.150
3062b186bf kernel: Remove dsmark support
4c1d13e995 kernel: bump 5.15 to 5.15.149
0844937947 umdns: update to Git 7c675979 (2024-03-04)
6f70e09a00 mediatek: filogic: add support for Cudy RE3000 v1
97f6a6bfaa ath11k-firmware: Move to new upstream repository for board-2.bin
503f78f91c hostapd: fix 11r defaults when using WPA
e5a12edb88 hostapd: fix 11r defaults when using SAE

6264d12ed8 firmware-utils: update to Git HEAD (2023-11-21)
ebdaee7194 ramips: add support for Sercomm CPJ routers
fd277ee490 ramips: mt7620: drop unnecessary trailing tabs
a8f31d2aa1 ramips: sercomm.mk: make common recipe to set a bit in pid
dae399196b scripts: sercomm-pid.py: use uppercase hwid in pid
95ebd609ae kernel: bump 5.15 to 5.15.139
d6b62611b8 firmware-utils: package oseama
40bd2bb3d6 firmware-utils: new package replacing otrx
a39dca7ead kernel: bump 5.15 to 5.15.138
c7b6cfac40 scripts/dump-target-info.pl: add new function to DUMP devices
6cb1cb1b13 OpenWrt v23.05.2: revert to branch defaults
1c26bcb108 OpenWrt v23.05.2: adjust config defaults
842932a63d netifd: fix IPv4 route target masking
51bb178824 treewide: fix shell errors during dump stage
4637ba72b7 scan.mk: do not silence output of dump phase
b38b5c4299 ramips: add support for MeiG SLT866 4G CPE
ce62536aca uboot-envtools: add environment config for MeiG SLT866
03e26f856f kernel: support reading hex MAC address from NVMEM
a00fc406b9 kernel: add support MeigLink SLM828 modem
275f7e07ee ramips: cf-ew72-v2: Add support for COMFAST CF-EW72 V2
65bf66f727 ramips: Add support for ComFast CF-E390AX
ce62c25c08 OpenWrt v23.05.1: revert to branch defaults
a58a86693f OpenWrt v23.05.1: adjust config defaults
101988c61a scripts/getver.sh: prevent asking for negative rev-parse
b7e81d210b iptables: backport patch fixing bug with string module
3d006f95f2 wolfssl: update to 5.6.4
46385eb7f8 netifd: update to the latest version
11a41bc4b2 netifd: update to Git HEAD (2023-11-09)
f6a9f0c57b ipq-wifi: update to Git HEAD (2023-11-10)
2285eb732a ucode: update to Git HEAD (2023-11-07)
f5e9fd624d hostapd: refresh patches
85d1b43be4 hostapd: permit 40MHz in 802.1s only also for 2.4GHz g/n with noscan
1cab0d74b3 hostapd: permit also channel 7 for 2.5GHz to be set to HT40PLUS
c9e8453de7 hostapd: fix broke noscan option for mesh
2ef625e769 mac80211: fix not set noscan option for wpa_supplicant
5106f554bb px5g-wolfssl: Fix permission of private key
6fd16b0d27 px5g-mbedtls: Fix permission of private key
6de0e0d01a hostapd: use rtnl to set up interfaces
bbfb920e99 wifi: fix applying mesh parameters when wpa_supplicant is in use
f780cfb92f netifd: update to the latest version
d3c193525e mediatek: add CMCC RAX3000M support
429715a237 uboot-mediatek: add support for CMCC RAX3000M
b209f45640 arm-trusted-firmware-mediatek: add emmc/spim-nand ddr4 build for mt7981
04cde73d56 treewide: fix MERCUSYS brand spelling
3223f31fd3 mbedtls: Activate secp521r1 curve by default
cfadbc090c image: fix image generation within ImageBuilder

43e9cded06 mpc85xx: correct WS-AP3715i eth LED assignment
eda1545e6e hostapd: add missing NULL pointer check in uc_hostapd_iface_stop
6019945e96 hostapd: fix a crash when disabling an interface during channel list update
83bf45ea5c package: base-files: turn error into warning
829196e1b1 netifd: update to the latest version
09b9d732ec hostapd: use phy name for hostapd interfaces instead of first-bss ifname
8b385a45a6 mac80211: fix AP reconfiguration on DFS channels in non-ETSI regdomain
0d1859c258 netifd: update to the latest version
5e3f86a101 hostapd: select libopenssl-legacy for openssl variants
90d5961751 hostapd: remove eap-eap192 auth type value
6e09f88d29 netifd: update to the latest version
6798f156f9 hostapd: support eap-eap2 and eap2 auth_type values
98d0ee9dbf hostapd: fix FILS key mgmt type for WPA3 Enterprise 192 bit
a701e6e1c2 netifd: update to the latest version
9720b094ae hostapd: backport from master, including ucode based reload support
263583dc1e ubus: update to the latest version
9af2ad5111 ucode: update to the latest version
7e55f20c1f kernel: backport support for renaming netdevs while up
385a50f02d ipq40xx: fix image building for ZTE MF287 series
2dc284a79a ramips: RT1800: fix invalid octal number error
c3be832427 ath79: fix packetloss on some WLR-7100
d536f398eb kernel: ensure VFIO related suboptions are disabled
3c8825e5f8 kernel: enable vfio and vfio-pci for armsr-armv8
c79854e9fc kernel: vfio: remove unneeded enable_unsafe_noiommu_mode parameter
c90005c58a x86: remove built-in vhost-net driver
5edeb1ee0c kernel: add vhost-net module
6897270491 mvebu: add reset delays of PHYs for Fortinet FortiGate 50E
10aee60361 ipq806x: Correct OnHub sysupgrade config logic
6c60bbbc94 x86: geode: fix hwrng register accesses
6577b550df base-files: sysupgrade: Add 2 sec sleep into process KILL loop
0165daf569 uboot-envtools: ramips: add support for ALFA Network AX1800RM
3cc223243b ramips: add support for ALFA Network AX1800RM
a7449e5e95 arm-trusted-firmware-mediatek: fix hang on reboot on MT7622
0cb2ff5d08 uboot-mediatek: sync mtk-snand driver with SDK

cdc8470aec mac80211: fix MT7620 Wi-Fi channel scanning function
9df9126320 ramips: pinctrl: support requesting different functions for same group
4f1a7e8897 mac80211: rework MT7620 PA/LNA RF calibration
b2d264dc68 mediatek: mt7622: set DEVICE_DTC_ADDR for BPi-R64
a2ffbc8d16 arm-trusted-firmware-mediatek: enable built-in 2.5G PHY on MT7988
d052d409a0 uboot-mediatek: fix dependency on TF-A for MT7988 RFB (sdmmc)
3967c26974 mediatek: filogic: remove stray quote
625d19c1e2 generic: sync MediaTek Ethernet driver with upstream
230c09d203 mediatek: add support for Ubiquiti UniFi 6 LR v3
c8c1805100 uboot-mediatek: add builds for UniFi 6 LR v2 and v3
ed370ec424 mediatek: generate bootloader artifacts for mt7988_rfb
35d123adfe uboot-mediatek: build fully-featured U-Boot for MT7988 RFB
87ef305984 mediatek: improve mt7981.dtsi
ffede121f8 mediatek: filogic: improve pinctrl drivers
5a9720945f mediatek: i2c: mt65xx: allow optional pmic clock
88c12d6632 mediatek: re-add dropped properties on BPi-R3
cf08db988b generic: backport initial LEDs hw control support
e685162a78 kernel: bump 5.15 to 5.15.130
8bf25dba77 kernel: bump 5.15 to 5.15.129
3c1721ae03 kernel: bump 5.15 to 5.15.128
56827dac01 kernel: allow adding devices without hw offload to a hw flowtable
736e3b81aa urngd: update to the latest master
f493987d13 nettle: update to 3.9.1
b9c94686f7 Revert "ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01837"
104178a990 mt76: update to the latest version

Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Tom Herbers <mail@tomherbers.de>

2034387af4 netfilter: fix typo in nf-socket and nf-tproxy kconfig
70e3f4e94d openssl: passing cflags to configure
287303b062 kernel: bump 5.10 to 5.10.184
920f2d9237 kernel: bump 5.10 to 5.10.183
ac5e37f832 kernel: bump 5.10 to 5.10.182
4b44bfe591 bcm63xx: fix NETGEAR DGND3700v2 boot loop
1a5e7d3f1c bmips: fix NETGEAR DGND3700v2 boot loop
e908856c43 kernel: mtd: bcm-wfi: add cferam name support
17f6001853 restool: update source.codeaurora.org repository link
ca669b7c07 ls-dpl: update source.codeaurora.org repository link
4a9eb94b5f bpf-headers: fix compilation with LLVM_IAS=1
afb4422702 openssl: bump to 1.1.1u
171b515192 kernel: bump 5.10 to 5.10.181
6bca11f496 kernel: bump 5.10 to 5.10.180
656e411454 ramips: add support for Keenetic Lite III rev. A
ce32068bf2 ca-certificates: Update to version 20230311
f4e4f5553d firmware: intel-microcode: update to 20230512
2c96dd6d4b firmware: intel-microcode: update to 20221108
3235300903 ipq-wifi: drop custom board-2.bins
b5a5751706 ipq40xx: R619AC: replace space with - separator in variant string
728afd14fa linux-firmware: move firmware file for mt7601u
9466152ea8 linux-firmware: update to 20230515
d2cc4ad326 linux-firmware: update to 20230310
320c919e39 linux-firmware: update to 20230117
b3ddc0941d linux-firmware: disable stripping
5fc704cdef linux-firmware: update to 20221214
d59e095fad linux-firmware: update to 20221109
ad3d63b273 linux-firmware: update to 20221012
91de737e9b linux-firmware: update to 20220913
d1365629e5 linux-firmware: update to 20220815
9c54ac6224 linux-firmware: Update to version 20220610
f3ccdf7ad6 linux-firmware: take linux-firmware.git's qca99x0 boardfile
8da1ba2c25 linux-firmware: Update to version 20220509
80fbad19ef ramips: correct page read return value of the mt7621 nand driver
80a99d9cf7 build: escape whitespaces in VERSION_DIST for Netgear images
30fca5413b fortify-headers: fix build error when _REDIR_TIME64 is not defined
4d6638464c fortify-headers: fix inconsistent time_t version of ppoll
695a22ab15 build: generate index.json

c2331038b2 kernel: remove obsolete netfilter tcp window size check bypass patch
4ae854d055 mac80211, mt76: add fixes for recently discovered security issues
b573a785e0 ncm: add error check and retry mechanism for gcom call
f61c5cf76b kernel: bump 5.10 to 5.10.176
a4212b77c0 kernel: bump 5.10 to 5.10.175
6b19d24254 kernel: bump 5.10 to 5.10.174
24d84a13a4 kernel: bump 5.10 to 5.10.173
36bf158b47 kernel: tcindex classifier has been retired
999cb9574f x86: fix deprecated CONFIG_MICROCODE_OLD_INTERACE
a88c65507d kernel: bump 5.10 to 5.10.172
cb91aa4b29 kernel: bump 5.10 to 5.10.170
26cc831e44 kernel: bump 5.10 to 5.10.169
28e5045f3a bcm4908: include usbport trigger
836e3d1e5e bcm4908: backport v6.4 pending DTS changes
b7c031d933 ipq40xx: Linksys MR8300: fix the USB port power
0170bc1af1 ramips: mt7621: enable lzma-loader for AFOUNDRY EW1200
96e3fee7ad ramips: fix 5g mac for TOTOLINK X5000R

4b7f9e42e2 lantiq-xrx200: fix wan LED on o2 box 6431
7c10b7b6f0 CI: build: fix external toolchain use with release tag tests
b08e1e978c OpenWrt v22.03.3: revert to branch defaults
221fbfa2d8 OpenWrt v22.03.3: adjust config defaults
43d71ad93e mac80211: Do not build brcmsmac on bcm47xx_legacy
181390f57d uml: fix 5.10 build
1fd2f9f7be kernel: Add missing kernel configuration options
8446d22aaa gdb: Do not link against xxhash
558aa1f482 odhcpd: fix null pointer dereference for INFORM messages
af4f635eed ipq40xx: sysupgrade: allow flashing Linksys factory firmware
4bda308657 base-files: stage2: add 'tail' to sysupgrade environment
2f1b73b70d treewide: Trigger reinstall of all wolfssl dependencies
77e2a24e62 wolfssl: update to 5.5.4-stable
158a33591d mbedtls: update to version 2.28.2
b23cab2fcf toolchain: gcc: import patch fixing asm machine directive for powerpc
6be9e3e636 kernel: remove hack patch, move kirkwood specific kmods to target modules.mk
b1722a048a kernel: bump 5.10 to 5.10.161
cdce4a0bfa uhttpd: update to latest Git HEAD

6c3e16055a kernel: backport ksmbd security fix ZDI-22-1690
275c51bf40 Revert "image-commands.mk: Be consistent in command invocation"
fec4fb3a56 sunxi: remove frequency for NanoPi R1
51a763ab0f arm-trusted-firmware-sunxi: drop CPE ID
377d805887 trusted-firmware-a.mk: use correct CPE ID
f30414c56d kernel: bump 5.10 to 5.10.160
47ac52a7c4 ath79: image: don't depend on other COMPILE targets
da79da3ac1 image: fix device profile specific COMPILE targets
9aa95bbebb rules: fix broken commitcount on alpine system
fcff234fd8 image-commands.mk: Be consistent in command invocation
be7b97d873 sunxi: fix typo in device packages for MarsBoard A10
709351bf32 kernel: Make KERNEL_MAKEOPTS recursively expanded
3b066a6581 lantiq: vr9: include usb driver for fritz 7430
39dcfcd987 wolfssl: fix build with /dev/crypto
e51f3a22aa toolchain: Update glibc 2.34 to recent HEAD
298d2d0412 Revert "mbedtls: import patch to fix illegal instruction on mpc85xx"
3de4572ed3 tools/ccache: fix build with musl and gcc 12
8e43a44f08 rpcd: update to latest Git HEAD
f43ceb60d5 iwinfo: update to latest Git HEAD
31baecb70e iwinfo: update to the latest version
f34c4a950e iwinfo: update to the latest version
9b7a3e1a5e iwinfo: update to the latest version
ce881873c0 kernel: add missing dependency to KERNEL_RPI_AXIPERF
7ccb4c6651 kernel: add missing symbol for bcm27xx
b18a0d0b92 generic: add support for EON EN25QX128A spi nor flash
d909fb1d3b kernel: bump 5.10 to 5.10.159
e5cec69484 kernel: bump 5.10 to 5.10.158
3a58bda06b kernel: bump 5.10 to 5.10.157
ee2341cac6 kernel: add symbol in generic config for 5.10.157
bc64ca15d4 kernel: kmod-net-rtl8192su: Remove package
b1204ce28c umbim: Allow roaming and partner connections
15bc6b23c7 kernel: further cleanup of xfrm[4|6]_mode*
6e396eff1a kernel: remove handling of xfrm[4|6]_mode_* modules
78fc12ddd0 kernel: fix typo for tegra crypto-sha1 module
4408f7d564 kernel: add kmod-btsdio package
6b2c445b88 kernel: remove CONFIG_MMC_BLOCK_BOUNCE
aef33ab13a ath79: fix Teltonika RUT230 v1 MAC assignment

8c1f8f9978 ipq40xx: ZTE MF286D: fix DEVICE_PACKAGES
54dc60e71d generic: fix unset symbol
c837fc9cdb kernel: bump 5.10 to 5.10.154
bbad2ee4de kernel: bump 5.10 to 5.10.153
d2ae7613b5 ramips: improve compatibility for Youku YK-L2 and YK-L1 series
9155d40513 ramips: gl-mt1300: downclock SPI to 50MHz
ca124d2e4b ramips: mt7621: use seama-lzma-loader for D-Link DIR-860L B1
fafc9448ae ramips: rt3883: use seama-lzma-loader for D-Link DIR-645
292d3f00c7 ramips: define lzma-loader recipe for SEAMA devices
d25e1a3bde ath79: fix MAC address assignment for TP-Link ar7241 devices
7fa6351310 tools/expat: update to 2.5.0
8122aa92fd ath79: add support for Linksys EA4500 v3
1133a8f805 ath79: add support to TrendNet TEW-673GRU
5725b773b4 qoriq: fix typo in FEATURES
615dbec223 mac80211: fix mesh airtime link metric estimation
a26f7e61e8 mac80211: fix issues with receiving small STP packets
bfeffb8aed mac80211: fix decap offload for stations on AP_VLAN interfaces
88c43b5887 hostapd: remove invalid dtim_period option processing

e95b359eaa kernel: netsupport: Add FQ-PIE as an optional sched kmod and extract PIE
051c24c69a kernel: extract kmod-sched-act-ipt from kmod-sched
23ccc71c61 kernel: netsupport: Extract act_police
3ca45248fd kernel: netsupport: Add kmod-sched-act-sample
7ee55d82fc kernel: netsupport: Extract sched-prio and sched-red
31fd96bdbd kernel: netsupport: Add kmod-sched-drr
c61ed09228 kernel: netsupport: kmod-sched: Reorder packages
26b58991b0 ipq40xx: fix ZTE MF289F port mapping
71178a8506 ipq40xx: Fix wrong GPIO for internal status LED on ZTE MF289F
3e15a54bb0 ipq40xx: Add ZTE MF289F
7a77aacb31 uboot-envtools: Fix format of autogenerated sectors
b3b3428a0e openssl: bump to 1.1.1s
e313cd8d15 uboot-layerscape: adjust LS1012A-IOT config and env
77522d4eb7 dnsmasq: Backport DHCPv6 server fix (CVE-2022-0934)
13bd217821 busybox: awk: fix use after free (CVE-2022-30065)
fe5cd3c9d9 util-linux: Update to version 2.37.4
84b3eafe39 bcm4908: backport upstream BQL support for bcm4908_enet
0ff3adfa11 kernel: bump 5.10 to 5.10.152
0abcea19d7 kernel: bump 5.10 to 5.10.151
0667688a40 kernel: bump 5.10 to 5.10.150
fe58ee9057 ramips: Correct Unielec 01 and 06 dts wan macaddr byte location
6c5313d77c bcm4908: backport bcm4908_enet fix for NULL dereference
91e4a74fff bcm4908: optimize Ethernet driver by using build_skb()
b4bc9eb837 kernel: mtd: backport SafeLoader parser
18c77387c5 kernel: mtd: backport extended dynamic partitions support

b472753d79 mediatek: fix Unifi 6LR network config
c0b7b2049e mpc85xx: fix unset kernel symbols
7c459ac1d5 mac80211: rt2x00: experimental improvements for MT7620 wifi
d004110ef7 mac80211: rt2x00: fix typo
0755c18ff1 mac80211: add patch descriptions to rt2x00 patches
7a26f40217 mediatek: fix ledbar of UniFi 6 LR when running custom U-Boot
f54d4ea0bb ramips: add support for Ubiquiti UniFi FlexHD
a28ccd58ed ath79: Make patches apply again
2419546cee generic: move ledbar driver from mediatek target
420a86436f mediatek: add led count
40610c5322 mediatek: add initialization after reset
26cd0c1ee9 mediatek: add support for reset gpio
b5665a0045 mediatek: support reading more than one byte of response
cd0283788f mediatek: cast literal value to char
a2d251573b mediatek: correctly log i2c response
7366ee86ef mediatek: remove gpiod_direction_output()
ba6c780acb mediatek: do not use gpiod_set_raw_value()
745d3cd4aa kernel: modules: package kmod-crypto-essiv
a3f9b42789 mediatek: fix typo in bpi-r64 image recipe
29c5d5d3da mediatek: bpi-r64: make initramfs/recovery optional
d10352917b ramips: fix GB-PC1 and GB-PC2 LEDs
0c9833d0e0 wireless-regdb: update to 2022-08-12
be4abbd84a kernel: bump 5.10 to 5.10.143
4e05e7dddf kernel: bump 5.10 to 5.10.142
1b0db300cb kernel: bump 5.10 to 5.10.141
bf65d2dcba kernel: bump 5.10 to 5.10.139
e7ef88ff1d kernel: build crypto md5/sha1/sha256 modules for powerpc

With the update to OpenWrt 21.02 the bridge MLD wakeup call feature was
removed. However the issue with Android devices and MLD is still
present. Therefore readding the bridge MLD wakeup call patch and porting
it to Linux 5.10 / OpenWrt 22.03.

Link: https://issuetracker.google.com/issues/149630944


Fixes: aab2b914 ("modules: switch to OpenWrt 21.02")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>