Run site check for manual package installations

Remove ramips-rt305x and now unused build features

Delete all default network device sections upon first boot.

Only LAN & WAN networks are defined at this point. We are using the
legacy way of definiting bridges via the interface sections ifname
option.

The prior filtering was based upon a single device and didn't take into
consideration that DSA interface names can be named arbitrarily.

Signed-off-by: David Bauer <mail@david-bauer.net>

23cde9d12a mpc85xx: add missing Kconfig symbols
fe498dd3f1 netifd: update to the latest version

Signed-off-by: David Bauer <mail@david-bauer.net>

With the removal of ramips-rt305x, all targets come with opkg again.

With the removal of ramips-rt305x, the last user of
GLUON_SPECIALIZE_KERNEL is gone.

VoCores aren't exactly useful mesh nodes except for experimentation.
They certainly aren't worth maintaining a whole target, in particular
one that has a WLAN driver not used by any other target.

38cdc57be6 mediatek: add missing config symbols
6073d2c02a generic: add missing config symbols
8921e36ed8 iwinfo: move device info into -data package
d3278c4343 build: ensure that dash isn't prepended twice to abi version suffix
47f617ef8d build: prepend ABI suffixes with a dash if package name ends with digit
febf6db0d0 ath79: add missing MTD_NAND_RB91X symbol
983fcc42a4 ath79: add missing GPIO_LATCH symbol
0ad49d368b ath79: mikrotik: fix beeper phantom noise on RB912
ffa943f0b9 ath79: ar934x: fix mounting issues if subpage is not supported
88e1c9b0b5 ath79: add support for MikroTik RouterBOARD 912UAG-2HPnD
bd2e070557 ath79: add NAND driver for MikroTik RB91xG series
43723e6db9 ath79: add gpio-latch driver for MikroTik RouterBOARDs
3eb34bc251 hostapd: make wnm_sleep_mode_no_keys configurable
89d21b7f62 hostapd: make country3 option configurable
72f0733123 ltq-deu: Mark lantiq DEU broken
b0424190ef iwinfo: build with nl80211 backend only and make shared
d723002d84 treewide: unmark selected packages nonshared
86f6171788 ath10k-ct: fix typo in Makefile
24cfa5005e ath10k-ct: update to latest version
69c10497c7 kernel/modules: move act_gact into kmod-sched-core
fc4b5411b3 package/comgt: Handle bind/unbind events

Signed-off-by: David Bauer <mail@david-bauer.net>

It was found that a one second timeout for nodeinfo data may be too low,
so that when a node is otherwise occupied that timeout may be reached
too often.

The nodeinfo query response is also vital to the status-page base
template, so that when it times out, the site will be turned in a broken
state, that it cannot recover from.

Fixes: #2256

Installing the script into the image allows site checks to run for
manual package installations via opkg.

A leading tab character usually marks recipe lines in Makefiles;
non-recipe lines must be indented using spaces.

The incorrect tab character doesn't seen to have caused any issues in
this case, but it should be fixed nonetheless, if only for consistency.

ath79-generic: add support for Siemens WS-AP3610

825aa0c respondd-module-airtime: fix null pointer deref

gluon-core: util: check if file exists prior to reading

actions: add mediatek-mt7622 target

Add the newly added mediatek-mt7622 to the firmware build-test matrix.

Signed-off-by: David Bauer <mail@david-bauer.net>

The file_contains_line helper function was not testing whether a file
exists or not prior attempting to read from it.

Add this check to circumvent errors on the private WiFi config in
case the hwflags file is missing.

Reported-by: Tom Herbers <freifunk@tomherbers.de>
Tested-by: Tom Herbers <freifunk@tomherbers.de>
Signed-off-by: David Bauer <mail@david-bauer.net>

d666ebcaa3 ubus: update to the latest version
a9100f2196 base-files: wifi: tidy up the reconf code
b27b63b082 base-files: wifi:  swap the order of some ubus calls
6f13a39035 mac80211: print an error if wifi teardown fails
9302e63d1a mac80211: always call wireless_set_data  (FS#3784)
bea9380149 mac80211: fix no_reload logic (FS#3902)
ccbe535604 mac80211: backport fix for nl80211 control port tx (fixes FS#3857)
4c29ff7cb8 mac80211: add support for 802.3 encap offload with software rate control
a078037ace mac80211: improve rate control performance
9fa925362f busybox: sysntpd: add trigger to reload server
a75928d125 busybox: sysntpd: option to bind server to iface

Signed-off-by: David Bauer <mail@david-bauer.net>

The relevant entry for the primary MAC location was lost when rebasing
the patch on OpenWrt 21.02.

Fixes commit ded4b8a7 ("rockchip-armv8: add FriendlyARM NanoPi R2S")

Signed-off-by: David Bauer <mail@david-bauer.net>

modules: update routing feed URL

The OpenWrt routing feed was moved to the OpenWrt GitHub org.

Update the URL, as the old one might not work in the future.

Signed-off-by: David Bauer <mail@david-bauer.net>

docs: remove dropped hardware from docs

mediatek-mt7622: add support for UniFi 6 LR

ramips-mt7621: add Xiaomi Mi Router 4A (Gigabit Edition)

ramips-mt76x8: add Xiaomi Mi Router 4C

Signed-off-by: David Bauer <mail@david-bauer.net>

Configure a radio for HE (802.11ax) operation in case it's supported by
the hardware. This can be the case for 2.4 GHz as well as 5 GHz.

Signed-off-by: David Bauer <mail@david-bauer.net>

Specifications:

- CPU: MediaTek MT7628AN (580MHz)
- Flash: 16MB
- RAM: 64MB DDR2
- 2.4 GHz: IEEE 802.11b/g/n with Integrated LNA and PA
- Antennas: 4x external single band antennas
- WAN: 1x 10/100M
- LAN: 2x 10/100M
- LEDs: 2x yellow/blue. Programmable (labelled as power on case)
                      - Non-programmable (shows WAN activity)
- Button: Reset

How to install:

1- Use OpenWRTInvasion to gain telnet and ftp access.
2- Push openwrt firmware to /tmp/ using ftp.
3- Connect to router using telnet. (IP: 192.168.31.1 -
   Username: root - No password)
4- Use command "mtd -r write /tmp/firmware.bin OS1" to flash into
   the router..
5- It takes around 2 minutes. After that router will restart itself
   to OpenWrt.

Specifications:

- SoC:      MediaTek MT7621
- Flash:    16 MiB NOR SPI
- RAM:      128 MiB DDR3
- Ethernet: 3x 10/100/1000 Mbps (switched, 2xLAN + WAN)
- WIFI0:    MT7603E 2.4GHz 802.11b/g/n
- WIFI1:    MT7612E 5GHz 802.11ac
- Antennas: 4x external (2 per radio), non-detachable
- LEDs:     Programmable "power" LED (two-coloured, yellow/blue)
            Non-programmable "internet" LED (shows WAN activity)
- Buttons:  Reset

Installation:

Bootloader won't accept any serial input unless "boot_wait" u-boot
environment variable is changed to "on".

Vendor firmware won't accept any serial input until "uart_en" is
set to "1".

Using the https://github.com/acecilia/OpenWRTInvasion exploit you
can gain access to shell to enable these options:

To enable uart keyboard actions - 'nvram set uart_en=1'
To make uboot delay boot work - 'nvram set boot_wait=on'
Set boot delay to 5 - 'nvram set bootdelay=5'

Then run 'nvram commit' to make the changes permanent.

Once in the shell (following the OpenWRTInvasion instructions) you
can then run the following to flash OpenWrt and then reboot:

'cd /tmp; curl https://downloads.openwrt.org/...-sysupgrade.bin
  --output firmware.bin; mtd -e OS1 -r write firmware.bin OS1'

Fixes commit 89dc6b20 ("ramips-rt305x: drop devices with insufficient flash")

Signed-off-by: David Bauer <mail@david-bauer.net>

e16a45f258 iwinfo: update to latest Git HEAD
0c51b265bf iwinfo: update to latest Git HEAD
85cef1cf22 kernel: bump 5.4 to 5.4.128
e171d11f55 libusb: Fix parsing of descriptors for multi-configuration devices
3d62b5d5c6 base-files: fix /tmp/TZ when zoneinfo not installed
3047df2317 base-files: fix zoneinfo support
ab5010d170 exfat: update to 5.12.3
72d93c1ba4 realtek: Fix failsafe mode
7a5a247c1f base-files: failsafe: Remove the VLAN modifier from interface name
c0fdfd15fc base-files: failsafe: Fix IP configuration
98b1a6435f kernel: Backport patch to automatically bring up DSA master when opening user port
ec780bdb92 kernel-5.4: backport latest patches for wireguard
82c700de67 hostapd: fix handling of the channel utilization options
1247a6bb35 bcm4908: fix Ethernet broken state after interface restart
25daa921da bcm4908: add kmod-gpio-button-hotplug
74dbf3412b base-files: fix typo in config_generate MAC check
125deb4d78 base-files: set MAC for bridge ports (devices) instead of bridge itself
e410ef8389 hostapd: wolfssl: add RNG to EC key
f6d8c0cf2b wolfssl: always export wc_ecc_set_rng
56228e9393 ath79: don't autodetect AR8033 PHY capabilities
2e157714a8 build,json: fix generation with empty profiles
8add3e139c build: preserve profiles.json between builds

Multi-port interfaces are stored in the network config as an array using
the ports key.