AVM Fritz!Box 7520 and Fritz!Box 7530 use the same hardware platform and can
only be distinguished by using the urlader partition or the fritz-tffs tools
and read the ProductID (Fritz_Box_HW247).

(cherry picked from commit 5888a50c)

Signed-off-by: David Bauer <mail@david-bauer.net>

The GL-MT1300 is a high-performance new generation pocket-sized router
that offers a powerful hardware and first-class cybersecurity protocol
with unique and modern design.

Specifications:
- SoC: MT7621A, Dual-Core @880MHz
- RAM: 256 MB DDR3
- Flash: 32 MB
- Ethernet: 3 x 10/100/1000: 2 x LAN + 1 x WAN
- Wireless: 1 x MT7615D Dual-Band 2.4GHz(400Mbps) + 5GHz(867Mbps)
- USB: 1 x USB 3.0 port
- Slot: 1 x MicroSD card slot
- Button: 1 x Reset button
- Switch: 1 x Mode switch
- LED: 1 x Blue LED + 1 x White LED

MAC addresses based on vendor firmware:
WAN : factory 0x4000
LAN : Mac from factory 0x4000 + 1
2.4GHz : factory 0x4
5GHz : Mac form factory 0x4 + 1

Flashing instructions:
1.Connect to one of LAN ports.
2.Set the static IP on the PC to 192.168.1.2.
3.Press the Reset button and power the device (do not release the button).
  After waiting for the blue led to flash 5 times, the white led will
  come on and release the button.
4.Browse the 192.168.1.1 web page and update firmware according to web
  tips.
5.The blue led will flash when the firmware is being upgraded.
6.The blue led stops blinking to indicate that the firmware upgrade is
  complete and U-Boot automatically starts the firmware.

The WRE6066, has in contrast to other ip40xx devices, has only 128MB system RAM.
This results in OOM situations and instability, to circumvent this we need
to use ath10k-smallbuffers.

Signed-off-by: skorpy <skorpy@frankfurt.ccc.de>
(cherry picked from commit a7a0257f6f1e67cfdbd86f805f27672f8a750570)

Co-authored-by: skorpy <skorpy@frankfurt.ccc.de>

The device was introduced in #2332 and merged in 102a4b93.

It appears that the autoupdater name wasn't correct and devices therefore don't receive updates.

root@64295-ggw3-20b399bb366f-132:~# lua -e 'print(require("platform_info").get_image_name())'
enterasys-ws-ap3705i

(cherry picked from commit 24955cce99ad3722f7c04a3c519904f1a876c581)

Co-authored-by: Tom Herbers <mail@tomherbers.de>

Now that OpenWrt implements a proper fix for the stalled boots on 74kc
boards, the previous workaround can be removed.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit ec57f6c6)

This is a temporary measure that fixes #2692.

This reverts commit 15ef8858.

(cherry picked from commit 22c47df2)

It looks like boot hangs on an AC-Mesh for unknown reasons. The last
message seen on the console is:

    [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)

But interestingly, it seems like enabling AIO somehow works around this
problem. Changing any off the following options seem to have the same
effect at the moment for Linux 5.10.160+5.10.161

    # CONFIG_KERNEL_AIO is not set
    # CONFIG_KERNEL_CGROUPS is not set
    # CONFIG_KERNEL_FANOTIFY is not set
    # CONFIG_KERNEL_FHANDLE is not set
    # CONFIG_KERNEL_IO_URING is not set
    # CONFIG_KERNEL_IPV6_MROUTE is not set
    # CONFIG_KERNEL_IPV6_SEG6_LWTUNNEL is not set
    # CONFIG_KERNEL_IP_MROUTE is not set
    CONFIG_KERNEL_PROC_STRIPPED=y

Just enable CONFIG_AIO until the actual problem was fixed.

Link: https://github.com/freifunk-gluon/gluon/issues/2784

(cherry picked from commit 536c771f)

(cherry picked from commit 33fa77a7)

Upstream added a standalone SPI kernel-loader which fixes the unbootable
image for the WDR4900. Thus, we can re-introduce this device to Gluon.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 301443da)

Ubiquiti Nanostation Loco M XW was renamed in v2022.1.x, but the alias to the old name was missing, so devices running the old release did not update.

(cherry picked from commit dc8055682ee228f1044f36d9e6248cfa9525f36f)

Co-authored-by: goligo <ich@malte.de>

(cherry picked from commit 3ab8007a)

(cherry picked from commit dd30a6e6)

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 94249bfa)

Support for the device was (re)added in #2455
(merged as 94e04393)

(cherry picked from commit cd37fe5d60543a0af296f64880ca7047c681a82a)

Co-authored-by: Tom Herbers <mail@tomherbers.de>

Specification:

SoC: MediaTek MT7628AN
RAM: 64MiB
Flash: 8MiB
Wifi:
  - 2.4GHz: MT7628AN
  - 5GHz: MT7612EN
LAN: 1x 10/100 Mbps

Flash instructions:
Flash factory image through stock firmware WEB UI.
Back to stock is possible by using TFTP and stripping down the Firmware
provided by TP-Link to a initramfs.

The flash space between 0x650000 and 0x7f0000
is blank in the stock firmware so I left it out as well.

Co-authored-by: Christoph Krapp <christoph.krapp@power.cloud>

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Note: Buffalo has introduced hardware changes without bumping the
revision number. 19.07 did not support the rb-variant so there's no need
to implement a migration for the rb-variant.
Every g300nh supported by Gluon should either be the s-variant or
been flashed wrongly.

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Gone due to
commit 45c84a11 ("ar71xx: drop target")

Note that it was wrongly marked as device class tiny in
commit 7fd7116e ("targets: add device-class flags") in the past,
the device has 64MB RAM and not 32MB.

Also, the device has no "led-running" assigned in DTS. The device has
three LEDs: "green:vpn", "green:lan" and "green:wlan". The first LED,
"green:vpn", has a "V" icon and was used to show the VPN connection
status in the vendor firmware. This LED will be used via the newly
added "led-boot" fallback in gluon-setup-mode. But will be unused
during normal operation due to the unassigned "led-running" in DTS.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

Gone due to
commit 45c84a11 ("ar71xx: drop target")

The CN/RU variant of the device has the same hardware
as the EU already supported, but contains a 16M flash chip.

Gone due to
commit 45c84a11 ("ar71xx: drop target")

ar71xx only supported the 8M variant

Specifications:
* SoC: AR7242 (Virian 400MHz)
* RAM: 64 MB DDR (W9751G6JB-25)
* Flash: 16MB SPI flash (S25FL129PIF)
* WiFi: AR9382 (2.4/5GHz) + 2x SE2595L
* LAN: 1x1000M (PEF7071V)

To install via EVA bootloader, a FTP connection need to be
established to 192.168.178.1 within the first seconds after power on:

  ftp> quote USER adam2
  ftp> quote PASS adam2
  ftp> binary
  ftp> debug
  ftp> passive
  ftp> quote MEDIA FLSH
  ftp> put lede-ar71xx-generic-fritz300e-squashfs-sysupgrade.bin mtd1

The Ubiquiti UniFi 6 LR now has a v2 with a different LED setup, thus
the previous model was added a v1 suffix.

Signed-off-by: David Bauer <mail@david-bauer.net>

The ip6tables-legacy metapackage was renamed to ip6ables-zz-legacy.

Co-Authored-By: J. Burfeind <github@aiyionpri.me>

Co-authored-by: Tim-Niklas Koch <info@tnkoch.de>
Co-authored-by: J. Burfeind <github@aiyionpri.me>

Gluon does not support usage of the integrated ADSL modem, thus
DSL-related packages can be removed.

Signed-off-by: David Bauer <mail@david-bauer.net>

Gone due to
commit 45c84a11 ("ar71xx: drop target")