Commit f8b15a6f authored by David Bauer's avatar David Bauer Committed by Martin Weinelt
Browse files

ramips-mt76x8: add support for Netgear R6120 (#1650)

parent 2f0d32ee
......@@ -380,6 +380,10 @@ ramips-mt76x8
- GL-MT300N v2 [#80211s]_
* NETGEAR
- R6120 [#80211s]_
* TP-Link
- TL-WR841N v13 [#80211s]_
......
From: Ludwig Thomeczek <ledesrc@wxorx.net>
Date: Tue, 12 Jun 2018 21:17:23 +0200
Subject: ramips: add support for Netgear R6120
This patch adds support for the Netgear R6120, aka Netgear AC1200.
Specification:
- SoC: MediaTek MT7628 (580 MHz)
- Flash: 16 MiB
- RAM: 64 MiB
- Wireless: 2.4Ghz(builtin) and 5Ghz (MT7612E)
- LAN speed: 10/100
- LAN ports: 4
- WAN speed: 10/100
- WAN ports: 1
- Serial baud rate of Bootloader and factory firmware: 57600
To flash use nmrpflash with the provided factory.img.
Flashing via webinterface will not work, for now.
Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 19386b9e139a25fd1ac29cd9a66b738b5b092cdf..4203773b4fa3ec771f07b7a8c414a416a0da0f20 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -301,6 +301,11 @@ mzk-ex750np)
na930)
set_usb_led "$boardname:blue:status"
;;
+netgear,r6120)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
+ ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
+ ;;
newifi-d1)
set_usb_led "$boardname:red:status"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 1c6cc6b0af745b43b81bbfffc9b5462c1b88defc..9424c7ddfd64f9149a24ff91e63b71990265d211 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -301,6 +301,10 @@ ramips_setup_interfaces()
"0:lan" "1:lan" "2:lan" "3:lan" "6t@eth0"
ucidef_set_interface_wan "usb0"
;;
+ netgear,r6120)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
+ ;;
mzk-dp150n|\
vocore-8M|\
vocore-16M)
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 6d021b6def2f1fe7b71a67f36749c440f3bad1d4..097cc6df569518f64dbfd641eeccc1a4b1b37a2b 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -38,6 +38,7 @@ get_status_led() {
mzk-w300nh2|\
nbg-419n|\
nbg-419n2|\
+ netgear,r6120|\
pwh2004|\
r6220|\
tplink,c20-v4|\
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 8055853508fc850a1826166c7e0cbdf443df27cb..7213b22d0c2734488bd96bc34e921f08649b8c2f 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -129,6 +129,7 @@ platform_check_image() {
psr-680w|\
px-4885-4M|\
px-4885-8M|\
+ netgear,r6120|\
rb750gr3|\
re6500|\
rp-n53|\
diff --git a/target/linux/ramips/dts/R6120.dts b/target/linux/ramips/dts/R6120.dts
new file mode 100644
index 0000000000000000000000000000000000000000..a0df0072379a7d8f974ec8025483410d5f9f1da1
--- /dev/null
+++ b/target/linux/ramips/dts/R6120.dts
@@ -0,0 +1,142 @@
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "netgear,r6120", "mediatek,mt7628an-soc";
+ model = "Netgear R6120";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "r6120:green:lan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power: power {
+ label = "r6120:green:power";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "r6120:green:wlan2g";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan_orange {
+ label = "r6120:orange:wlan2g";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "r6120:green:wan";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_orange {
+ label = "r6120:orange:wan";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "p0led_an", "p1led_an", "p2led_an",
+ "p3led_an", "p4led_an", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "nvram";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "firmware";
+ reg = <0x90000 0xf60000>;
+ };
+
+ partition@ff0000 {
+ label = "reserved";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&factory 0x4>;
+ mtd-mac-address-increment = <(2)>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index 34bd662f3a9490bdb0fd125af5ffa8a0f77c5f16..bc282666d8c1a4b6ce5beabe2b492331fb48a23a 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -2,6 +2,17 @@
# MT76x8 Profiles
#
+DEVICE_VARS += SERCOMM_KERNEL_OFFSET SERCOMM_HWID SERCOMM_HWVER SERCOMM_SWVER
+
+define Build/mksercommfw
+ $(STAGING_DIR_HOST)/bin/mksercommfw \
+ $@ \
+ $(SERCOMM_KERNEL_OFFSET) \
+ $(SERCOMM_HWID) \
+ $(SERCOMM_HWVER) \
+ $(SERCOMM_SWVER)
+endef
+
define Device/tplink
TPLINK_FLASHLAYOUT :=
TPLINK_HWID :=
@@ -90,6 +101,23 @@ define Device/mt7628
endef
TARGET_DEVICES += mt7628
+define Device/netgear_r6120
+ DTS := R6120
+ BLOCKSIZE := 64k
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := Netgear R6120
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
+ SERCOMM_KERNEL_OFFSET := 90000
+ SERCOMM_HWID := CGQ
+ SERCOMM_HWVER := A001
+ SERCOMM_SWVER := 0040
+ IMAGES += factory.img
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs | pad-rootfs
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.img := $$(IMAGE/default) | mksercommfw
+endef
+TARGET_DEVICES += netgear_r6120
+
define Device/omega2
DTS := OMEGA2
IMAGE_SIZE := $(ralink_default_fw_size_16M)
From: Mathias Kresin <dev@kresin.me>
Date: Sat, 5 Jan 2019 20:51:00 +0100
Subject: tools: add zip utility
One image requires a zip compressed image, so add the zip util found in
the packages feed, and extend it with some useful debian patches.
Signed-off-by: Mathias Kresin <dev@kresin.me>
tools: zip: add option for reproducible archives
Add the option -mt/--mtime to pass a timestamp which is used as filedate
for the containing files.
So far, it isn't used for anything written to the extra fields,
therefore requires the -X (eXclude eXtra file attributes) parameter to
be effective.
Signed-off-by: Mathias Kresin <dev@kresin.me>
diff --git a/tools/Makefile b/tools/Makefile
index d2b5daf18c233c8e94657fd61922c75770a3b35b..3ac3b226d35311c606e6dcc562fb8a2d31cec584 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -32,7 +32,7 @@ tools-$(CONFIG_TARGET_x86) += qemu
tools-$(CONFIG_TARGET_mxs) += elftosb sdimage
tools-$(CONFIG_TARGET_ar71xx) += lzma-old squashfs
tools-$(CONFIG_USES_MINOR) += kernel2minor
-tools-y += lzma squashfs4
+tools-y += lzma squashfs4 zip
tools-$(BUILD_B43_TOOLS) += b43-tools
tools-$(BUILD_ISL) += isl
tools-$(CONFIG_USE_SPARSE) += sparse
diff --git a/tools/zip/Makefile b/tools/zip/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..7dd81a1b8bc3bfeb5773d0770cb57c164f6db157
--- /dev/null
+++ b/tools/zip/Makefile
@@ -0,0 +1,36 @@
+#
+# Copyright (C) 2007-2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=zip
+PKG_REV:=30
+PKG_VERSION:=3.0
+
+PKG_SOURCE:=$(PKG_NAME)$(PKG_REV).tar.gz
+PKG_SOURCE_URL:=@SF/infozip
+PKG_HASH:=f0e8bb1f9b7eb0b01285495a2699df3a4b766784c1765a8f1aeedf63c0806369
+
+PKG_LICENSE:=BSD-4-Clause
+PKG_LICENSE_FILES:=LICENSE
+
+HOST_BUILD_DIR:=$(BUILD_DIR_HOST)/$(PKG_NAME)-$(PKG_VERSION)/zip$(PKG_REV)
+HOST_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/host-build.mk
+
+define Host/Compile
+ +$(HOST_MAKE_VARS) $(MAKE) $(HOST_JOBS) -C $(HOST_BUILD_DIR) -I. -f unix/Makefile zip
+endef
+
+define Host/Install
+ $(INSTALL_DIR) $(STAGING_DIR_HOST)/bin/
+ $(INSTALL_BIN) $(HOST_BUILD_DIR)/zip $(STAGING_DIR_HOST)/bin/
+endef
+
+$(eval $(call HostBuild))
+#$(eval $(call BuildPackage,zip))
diff --git a/tools/zip/patches/001-unix-configure-borrow-the-LFS-test-from-autotools.patch b/tools/zip/patches/001-unix-configure-borrow-the-LFS-test-from-autotools.patch
new file mode 100644
index 0000000000000000000000000000000000000000..ef0de6fd9b9bb1f2ee29a9609ce0dbd7799f3410
--- /dev/null
+++ b/tools/zip/patches/001-unix-configure-borrow-the-LFS-test-from-autotools.patch
@@ -0,0 +1,89 @@
+From fc392c939b9a18959482f588aff0afc29dd6d30a Mon Sep 17 00:00:00 2001
+From: Romain Naour <romain.naour at openwide.fr>
+Date: Fri, 23 Jan 2015 22:20:18 +0100
+Subject: [PATCH 6/6] unix/configure: borrow the LFS test from autotools.
+
+Infozip's LFS check can't work for cross-compilation
+since it try to run a target's binary on the host system.
+
+Instead, use to LFS test used by autotools which is a
+compilation test.
+(see autotools/lib/autoconf/specific.m4)
+
+Reported-by: Richard Genoud <richard.genoud at gmail.com>
+Signed-off-by: Romain Naour <romain.naour at openwide.fr>
+---
+ configure | 46 +++++++++++++++-------------------------------
+ 1 file changed, 15 insertions(+), 31 deletions(-)
+
+--- a/unix/configure
++++ b/unix/configure
+@@ -399,9 +399,8 @@ else
+ fi
+
+
+-# Now we set the 64-bit file environment and check the size of off_t
+-# Added 11/4/2003 EG
+-# Revised 8/12/2004 EG
++# LFS check borrowed from autotools sources
++# lib/autoconf/specific.m4
+
+ echo Check for Large File Support
+ cat > conftest.c << _EOF_
+@@ -410,23 +409,19 @@ cat > conftest.c << _EOF_
+ # define _FILE_OFFSET_BITS 64 /* select default interface as 64 bit */
+ # define _LARGE_FILES /* some OSes need this for 64-bit off_t */
+ #include <sys/types.h>
+-#include <sys/stat.h>
+-#include <unistd.h>
+-#include <stdio.h>
++
++ /* Check that off_t can represent 2**63 - 1 correctly.
++ We can't simply define LARGE_OFF_T to be 9223372036854775807,
++ since some C++ compilers masquerading as C compilers
++ incorrectly reject 9223372036854775807. */
++#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
++ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
++ && LARGE_OFF_T % 2147483647 == 1)
++ ? 1 : -1];
++
+ int main()
+ {
+- off_t offset;
+- struct stat s;
+- /* see if have 64-bit off_t */
+- if (sizeof(offset) < 8)
+- return 1;
+- printf(" off_t is %d bytes\n", sizeof(off_t));
+- /* see if have 64-bit stat */
+- if (sizeof(s.st_size) < 8) {
+- printf(" s.st_size is %d bytes\n", sizeof(s.st_size));
+- return 2;
+- }
+- return 3;
++ return 0;
+ }
+ _EOF_
+ # compile it
+@@ -434,19 +429,8 @@ $CC -o conftest conftest.c >/dev/null 2>
+ if [ $? -ne 0 ]; then
+ echo -- no Large File Support
+ else
+-# run it
+- ./conftest
+- r=$?
+- if [ $r -eq 1 ]; then
+- echo -- no Large File Support - no 64-bit off_t
+- elif [ $r -eq 2 ]; then
+- echo -- no Large File Support - no 64-bit stat
+- elif [ $r -eq 3 ]; then
+- echo -- yes we have Large File Support!
+- CFLAGS="${CFLAGS} -DLARGE_FILE_SUPPORT"
+- else
+- echo -- no Large File Support - conftest returned $r
+- fi
++ echo -- yes we have Large File Support!
++ CFLAGS="${CFLAGS} -DLARGE_FILE_SUPPORT"
+ fi
+
+
diff --git a/tools/zip/patches/004-do-not-set-unwanted-cflags.patch b/tools/zip/patches/004-do-not-set-unwanted-cflags.patch
new file mode 100644
index 0000000000000000000000000000000000000000..bfd226077a9742f87a1988747a81e9226e89dfaf
--- /dev/null
+++ b/tools/zip/patches/004-do-not-set-unwanted-cflags.patch
@@ -0,0 +1,15 @@
+From: Santiago Vila <sanvila@debian.org>
+Subject: Do not set unwanted CFLAGS, as it breaks DEB_BUILD_OPTIONS
+X-Debian-version: 2.32-1
+
+--- a/unix/configure
++++ b/unix/configure
+@@ -98,7 +98,7 @@ int main()
+ _EOF_
+ $CC $CFLAGS -c conftest.c > /dev/null 2>/dev/null
+ if test $? -eq 0; then
+- CFLAGS_OPT='-O3'
++ # CFLAGS_OPT='-O3'
+ echo " GNU C ($CFLAGS_OPT)"
+ # Special Mac OS X shared library "ld" option?
+ if test ` uname -s 2> /dev/null ` = 'Darwin'; then
diff --git a/tools/zip/patches/006-stack-markings-to-avoid-executable-stack.patch b/tools/zip/patches/006-stack-markings-to-avoid-executable-stack.patch
new file mode 100644
index 0000000000000000000000000000000000000000..8b479faedaeedbe83d378306d386a0a88493b282
--- /dev/null
+++ b/tools/zip/patches/006-stack-markings-to-avoid-executable-stack.patch
@@ -0,0 +1,21 @@
+From: Kees Cook <kees@debian.org>
+Subject: put stack markings in i386 assembly to avoid executable stack
+Bug-Debian: http://bugs.debian.org/528280
+X-Debian-version: 3.0-2
+
+--- a/crc_i386.S
++++ b/crc_i386.S
+@@ -302,3 +302,5 @@ _crc32: /* ulg c
+ #endif /* i386 || _i386 || _I386 || __i386 */
+
+ #endif /* !USE_ZLIB && !CRC_TABLE_ONLY */
++.section .note.GNU-stack, "", @progbits
++.previous
+--- a/match.S
++++ b/match.S
+@@ -405,3 +405,5 @@ L__return:
+ #endif /* i386 || _I386 || _i386 || __i386 */
+
+ #endif /* !USE_ZLIB */
++.section .note.GNU-stack, "", @progbits
++.previous
diff --git a/tools/zip/patches/007-fclose-in-file-not-fclose-x.patch b/tools/zip/patches/007-fclose-in-file-not-fclose-x.patch
new file mode 100644
index 0000000000000000000000000000000000000000..402f90a2d5ef3d08a7d71268fe4f5e2484a10664
--- /dev/null
+++ b/tools/zip/patches/007-fclose-in-file-not-fclose-x.patch
@@ -0,0 +1,16 @@
+From: Christian Spieler
+Subject: zipnote.c: Close in_file instead of undefined file x
+Bug-Debian: http://bugs.debian.org/628594
+X-Debian-version: 3.0-4
+
+--- a/zipnote.c
++++ b/zipnote.c
+@@ -661,7 +661,7 @@ char **argv; /* command line
+ if ((r = zipcopy(z)) != ZE_OK)
+ ziperr(r, "was copying an entry");
+ }
+- fclose(x);
++ fclose(in_file);
+
+ /* Write central directory and end of central directory with new comments */
+ if ((c = zftello(y)) == (zoff_t)-1) /* get start of central */
diff --git a/tools/zip/patches/008-hardening-build-fix-1.patch b/tools/zip/patches/008-hardening-build-fix-1.patch
new file mode 100644
index 0000000000000000000000000000000000000000..a0c3a91eeec064b2305c3873a8a95669c750ea9b
--- /dev/null
+++ b/tools/zip/patches/008-hardening-build-fix-1.patch
@@ -0,0 +1,25 @@
+From: Santiago Vila <sanvila@debian.org>
+Subject: Use format specifier %s to print strings, not the string itself
+Bug-Debian: http://bugs.debian.org/673476
+X-Debian-version: 3.0-5
+
+--- a/zip.c
++++ b/zip.c
+@@ -1028,7 +1028,7 @@ local void help_extended()
+
+ for (i = 0; i < sizeof(text)/sizeof(char *); i++)
+ {
+- printf(text[i]);
++ printf("%s", text[i]);
+ putchar('\n');
+ }
+ #ifdef DOS
+@@ -1225,7 +1225,7 @@ local void version_info()
+ CR_MAJORVER, CR_MINORVER, CR_BETA_VER, CR_VERSION_DATE);
+ for (i = 0; i < sizeof(cryptnote)/sizeof(char *); i++)
+ {
+- printf(cryptnote[i]);
++ printf("%s", cryptnote[i]);
+ putchar('\n');
+ }
+ ++i; /* crypt support means there IS at least one compilation option */
diff --git a/tools/zip/patches/009-hardening-build-fix-2.patch b/tools/zip/patches/009-hardening-build-fix-2.patch
new file mode 100644
index 0000000000000000000000000000000000000000..e295ffbc641879768cc9257641fae85af327a338
--- /dev/null
+++ b/tools/zip/patches/009-hardening-build-fix-2.patch
@@ -0,0 +1,16 @@
+From: Santiago Vila <sanvila@debian.org>
+Subject: unix/configure: Take linking flags from the environment
+Bug-Debian: http://bugs.debian.org/673476
+X-Debian-version: 3.0-5
+
+--- a/unix/configure
++++ b/unix/configure
+@@ -18,7 +18,7 @@ trap "rm -f conftest* core a.out; exit 1
+
+ CC=${1-cc}
+ CFLAGS=${2-"-I. -DUNIX"}
+-LFLAGS1=''
++LFLAGS1=${LDFLAGS}
+ LFLAGS2=''
+ LN="ln -s"
+
diff --git a/tools/zip/patches/010-remove-build-date.patch b/tools/zip/patches/010-remove-build-date.patch
new file mode 100644
index 0000000000000000000000000000000000000000..5fc385228a8f6bff01416748bb6c392f2e986322
--- /dev/null
+++ b/tools/zip/patches/010-remove-build-date.patch
@@ -0,0 +1,15 @@
+From: Santiago Vila <sanvila@debian.org>
+Subject: Remove (optional) build date to make the build reproducible
+Bug-Debian: http://bugs.debian.org/779042
+
+--- a/unix/unix.c
++++ b/unix/unix.c
+@@ -1020,7 +1020,7 @@ void version_local()
+
+
+ /* Define the compile date string */
+-#ifdef __DATE__
++#if 0
+ # define COMPILE_DATE " on " __DATE__
+ #else
+ # define COMPILE_DATE ""
diff --git a/tools/zip/patches/011-add-option-for-reproducible-archives.patch b/tools/zip/patches/011-add-option-for-reproducible-archives.patch
new file mode 100644
index 0000000000000000000000000000000000000000..45b9d67e159327798535db55cd264ab9eeec6c38
--- /dev/null
+++ b/tools/zip/patches/011-add-option-for-reproducible-archives.patch
@@ -0,0 +1,145 @@
+From 6d659fc87451c02c8777dc33f750b16834e4c715 Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Sat, 12 Jan 2019 19:33:33 +0100
+Subject: [PATCH] add option for reproducible archives
+
+Add the option -mt/--mtime to pass a timestamp which is used as filedate
+for the containing files.
+
+So far, it isn't used for anything written to the extra fields,
+therefore requires the -X (eXclude eXtra file attributes) parameter to
+be effective.
+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ globals.c | 1 +
+ util.c | 22 ++++++++++++++++++++++
+ zip.c | 6 ++++++
+ zip.h | 1 +
+ zipup.c | 4 +++-
+ 5 files changed, 33 insertions(+), 1 deletion(-)
+
+--- a/globals.c