Revert "ath79-generic: add TPLink EAP225 Outdoor v3"

This reverts commit 60605875.

patches/openwrt/0004-ath79-support-for-TP-Link-EAP225-Outdoor-v3.patch

-From: Paul Maruhn <paulmaruhn@posteo.de>
-Date: Tue, 22 Mar 2022 21:06:42 +0100
-Subject: ath79: support for TP-Link EAP225-Outdoor v3
-
-This model is almost identical to the EAP225-Outdoor v1.
-Major difference is the RTL8211fs PHY Chipset.
-
-Signed-off-by: Philipp Rothmann <philipprothmann@posteo.de>
-
-diff --git a/target/linux/ath79/config-5.10 b/target/linux/ath79/config-5.10
-index 8c662173efb8e6873f9c1dfba9acabb029e43025..942d43096e5d3f74036d976e5ae151b3047331dc 100644
---- a/target/linux/ath79/config-5.10
-+++ b/target/linux/ath79/config-5.10
-@@ -202,3 +202,4 @@ CONFIG_TICK_CPU_ACCOUNTING=y
- CONFIG_TINY_SRCU=y
- CONFIG_USB_SUPPORT=y
- CONFIG_USE_OF=y
-+CONFIG_REALTEK_PHY=y
-diff --git a/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v3.dts b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v3.dts
-new file mode 100644
-index 0000000000000000000000000000000000000000..94ea216922b3808b98ed841ceb0ac7c8fca9e0ef
---- /dev/null
-+++ b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v3.dts
-@@ -0,0 +1,92 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include "qca9563_tplink_eap2x5-1port.dtsi"
-+
-+/ {
-+	compatible = "tplink,eap225-outdoor-v3", "qca,qca9563";
-+	model = "TP-Link EAP225-Outdoor v3";
-+
-+	aliases {
-+		led-boot = &led_status_green;
-+		led-failsafe = &led_status_amber;
-+		led-running = &led_status_green;
-+		led-upgrade = &led_status_amber;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led_status_green: status_green {
-+			label = "green:status";
-+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-+			default-state = "on";
-+		};
-+
-+		led_status_amber: status_amber {
-+			label = "amber:status";
-+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&eth0 {
-+	phy-handle = <&phy6>;
-+};
-+
-+&spi {
-+	status = "okay";
-+
-+	flash@0 {
-+		compatible = "jedec,spi-nor";
-+		reg = <0>;
-+		spi-max-frequency = <25000000>;
-+
-+		partitions {
-+			compatible = "fixed-partitions";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			partition@0 {
-+				label = "u-boot";
-+				reg = <0x000000 0x020000>;
-+				read-only;
-+			};
-+
-+			partition@20000 {
-+				label = "partition-table";
-+				reg = <0x020000 0x010000>;
-+				read-only;
-+			};
-+
-+			info: partition@30000 {
-+				label = "info";
-+				reg = <0x030000 0x010000>;
-+				read-only;
-+			};
-+
-+			partition@40000 {
-+				compatible = "openwrt,elf";
-+				label = "firmware";
-+				reg = <0x040000 0xec0000>;
-+			};
-+
-+			partition@f00000 {
-+				label = "config";
-+				reg = <0xf00000 0x030000>;
-+				read-only;
-+			};
-+
-+			partition@f30000 {
-+				label = "log";
-+				reg = <0xf30000 0x0c0000>;
-+				read-only;
-+			};
-+
-+			art: partition@ff0000 {
-+				label = "art";
-+				reg = <0xff0000 0x010000>;
-+				read-only;
-+			};
-+		};
-+	};
-+};
-diff --git a/target/linux/ath79/dts/qca9563_tplink_eap2x5-1port.dtsi b/target/linux/ath79/dts/qca9563_tplink_eap2x5-1port.dtsi
-index e10c5dbb739373faffef4d64fa28964a3b780b75..0fb25f480c5b5477974f9008bf6afaf6fdb760f5 100644
---- a/target/linux/ath79/dts/qca9563_tplink_eap2x5-1port.dtsi
-+++ b/target/linux/ath79/dts/qca9563_tplink_eap2x5-1port.dtsi
-@@ -105,6 +105,11 @@
- 		reg = <4>;
- 		reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- 	};
-+
-+	phy6: ethernet-phy@6 {
-+		reg = <6>;
-+		
-+	};
- };
- 
- &eth0 {
-diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
-index 258b0814424da39e9083b529cb154c5340c5bc0b..59e60ca85e497492161d1b6727a3ebc203f94abb 100644
---- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
-+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
-@@ -76,6 +76,7 @@ ath79_setup_interfaces()
- 	tplink,cpe610-v2|\
- 	tplink,cpe710-v1|\
- 	tplink,eap225-outdoor-v1|\
-+	tplink,eap225-outdoor-v3|\
- 	tplink,eap225-v1|\
- 	tplink,eap225-v3|\
- 	tplink,eap245-v1|\
-diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
-index 668fd76af3a43afabd5c1eee0246a56009d426da..a1b2201fee553c646242e1dec369e410546d25df 100644
---- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
-+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
-@@ -253,6 +253,7 @@ case "$FIRMWARE" in
- 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
- 		;;
- 	tplink,eap225-outdoor-v1|\
-+	tplink,eap225-outdoor-v3|\
- 	tplink,eap225-v3|\
- 	tplink,eap225-wall-v2)
- 		caldata_extract "art" 0x5000 0x2f20
-diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
-index fed572c884c75bd21081c7c22dd4652ecefdd993..3d3a45711302b7a73c914d80ec0d309878813149 100644
---- a/target/linux/ath79/image/generic-tp-link.mk
-+++ b/target/linux/ath79/image/generic-tp-link.mk
-@@ -401,6 +401,17 @@ define Device/tplink_eap225-outdoor-v1
- endef
- TARGET_DEVICES += tplink_eap225-outdoor-v1
- 
-+define Device/tplink_eap225-outdoor-v3
-+  $(Device/tplink-eap2x5)
-+  SOC := qca9563
-+  IMAGE_SIZE := 13824k
-+  DEVICE_MODEL := EAP225-Outdoor
-+  DEVICE_VARIANT := v3
-+  DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
-+  TPLINK_BOARD_ID := EAP225-V3
-+endef
-+TARGET_DEVICES += tplink_eap225-outdoor-v3
-+
- define Device/tplink_eap225-v1
-   $(Device/tplink-eap2x5)
-   SOC := qca9563

patches/openwrt/0008-firmware-utils-bump-to-git-HEAD.patch

-From: Sander Vanheule <sander@svanheule.net>
-Date: Mon, 27 Jun 2022 21:24:24 +0200
-Subject: firmware-utils: bump to git HEAD
-
-The support-list partition for the EAP225-V3 board ID became larger than
-the allocated size, resulting in factory image generation for the
-EAP225-Outdoor v3 and EAP225 v3 to fail. The make directive
-Build/tplink-safeloader ignores this failure however, resulting in a
-seemingly successful build with empty factory images.
-
-Included changes:
-    e609c5d75186 tplink-safeloader: drop unqualified EAP225-V3 IDs
-
-Signed-off-by: Sander Vanheule <sander@svanheule.net>
-
-diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile
-index 2534cec54383b28c4c93d0f4f70263a9af0274cb..7dc406e755cd9c56e4ec6de42bcf9a93aabb2581 100644
---- a/tools/firmware-utils/Makefile
-+++ b/tools/firmware-utils/Makefile
-@@ -12,8 +12,8 @@ PKG_RELEASE:=1
- PKG_SOURCE_PROTO:=git
- PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware-utils.git
- PKG_SOURCE_DATE:=2022-04-25
--PKG_SOURCE_VERSION:=ddc3e00e314d3fbc3f9faab2d07395722ce9b01a
--PKG_MIRROR_HASH:=246fc1d72d3a8cdb4072d81e033c92abaf614acd6f35a10fffd029d5c7f9303b
-+PKG_SOURCE_VERSION:=e609c5d751868ae823c236332c76ce3c50acdd2e
-+PKG_MIRROR_HASH:=f1a5af565bff50ccc99471a2be71636ed685dd15bfb9b162be9acf8ee28033a6
- 
- include $(INCLUDE_DIR)/host-build.mk
- include $(INCLUDE_DIR)/cmake.mk

targets/ath79-generic

@@ -452,10 +452,6 @@ device('tp-link-eap225-outdoor-v1', 'tplink_eap225-outdoor-v1', {
 	packages = ATH10K_PACKAGES_QCA9888,
 })
 
-device('tp-link-eap225-outdoor-v3', 'tplink_eap225-outdoor-v3', {
-	packages = ATH10K_PACKAGES_QCA9888,
-})
-
 device('tp-link-re355-v1', 'tplink_re355-v1', {
 	manifest_aliases = {
 		'tp-link-re355', -- upgrade from OpenWrt 19.07