Skip to content
Snippets Groups Projects
Commit 8347527a authored by Nils Schneider's avatar Nils Schneider
Browse files

docs: unclutter site-example

parent 896c81cc
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
docs/site-example/modules
+ 12
− 18
View file @ 8347527a
## gluon site modules example
# this file allows to define additional
# package feeds to be used.
# packages from this feeds can then be included
# via site.mk
## GLUON_SITE_FEEDS
# feeds to include, note that this is not called
# GLUON_FEEDS as in the Gluon modules file.
# This file allows specifying additional repositories to use
# when building gluon.
#
# for each feed name given, there have to be
# two variables given in the following.
GLUON_SITE_FEEDS='ffhh_packages'
# In most cases, it is not required so don't add it.
## GLUON_SITE_FEEDS
# for each feed name given, add the corresponding PACKAGES_* lines
# documented below
#GLUON_SITE_FEEDS='my_own_packages'
## PACKAGES_$feedname_REPO
# the git repository from where to clone the package feed
PACKAGES_FFHH_PACKAGES_REPO=git://github.com/freifunkhamburg/ffhh-packages.git
#PACKAGES_MY_OWN_PACKAGES_REPO=https://github.com/.../my-own-packages.git
## PACKAGES_$feedname_COMMIT
# the version/commit of the git repository to clone
#PACKAGES_MY_OWN_PACKAGES_COMMIT=123456789aabcda1a69b04278e4d38f2a3f57e49
PACKAGES_FFHH_PACKAGES_COMMIT=0fc9d44e95000c61a69b04278e4d38f2a3f57e49
## PACKAGES_$feedname_BRANCH
# the branch to check out
#PACKAGES_MY_OWN_PACKAGES_BRANCH=my_branch
docs/site-example/site.conf
+ 163
− 230
View file @ 8347527a
--[[ gluon site.conf example
This file is loosely related to the original site.conf used in Lübeck.
There are comments added to most switches to explain the usage of gluon.
This is lua code now, not perl anymore.
Happy compiling!
]]
-- This is an example site configuration for Gluon v2014.4
--
-- Take a look at the documentation located at
-- http://gluon.readthedocs.org/ for details.
--
-- This configuration will not work as it. You're required to make
-- community specific changes to it!
{
--[[ Community settings
hostname_prefix: Nodename prefix
freifunk-abcdef123456 (hex-part is generated from node's MAC address)
site_name: Name of your community
site_code: Shortcode of your community
]]
hostname_prefix = 'freifunk',
site_name = 'Freifunk Lübeck',
site_code = 'ffhl',
--[[ General network settings
prefix4: IPv4 range of your community
prefix6: IPv6 range of your community
is also required for radvd
]]
prefix4 = '10.130.0.0/20',
prefix6 = 'fdef:ffc0:3dd7::/64',
--[[ NTP settings
Synchronize the time of the nodes
timezone: Timezone of your community
http://wiki.openwrt.org/doc/uci/system#time.zones
ntp_servers: List of NTP-Servers to query. You can use any public and/or your private NTP-Servers of your community.
http://www.pool.ntp.org/zone/de
]]
timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',
ntp_servers = {'1.ntp.services.ffhl'},
--[[ Wireless settings
regdom: IEEE 802.11 Regulatory Domain
http://en.wikipedia.org/wiki/IEEE_802.11#Regulatory_domains_and_legal_compliance
wifi24: Wifi settings for 2.4 GHz frequency devices
wifi5: Wifi settings for 5 GHz frequency devices
sub
ssid: Wifi name shown to the user (We recommend %site_code%.freifunk.net)
channel: Wifi channel to use
htmode: Specifies the channel width in 802.11n and 802.11ac mode, possible values are:
HT20 (single 20MHz channel),
HT40- (2x 20MHz channels, primary/control channel is upper, secondary channel is below)
HT40+ (2x 20MHz channels, primary/control channel is lower, secondary channel is above).
VHT20 / VHT40 / VHT80 / VHT160 (channel width in 802.11ac, extra channels are picked according to the specification)
http://wiki.openwrt.org/doc/uci/wireless#common.options (-> htmode)
mesh_ssid: SSID of the mesh-interface, only used between nodes
mesh_bssid: BSSID of the mesh-interface
The supplied default of ff:ff:ff:ff:ff:ff will not work.
You'll need to replace it with randomly generated, non-broadcast BSSID!
mesh_mcast_rate: multicast rate of the mesh-interface
]]
regdom = 'DE',
wifi24 = {
ssid = 'luebeck.freifunk.net',
channel = 1,
htmode = 'HT40+',
mesh_ssid = 'ff:ff:ff:ff:ff:ff',
mesh_bssid = 'ff:ff:ff:ff:ff:ff',
mesh_mcast_rate = 12000,
},
wifi5 = {
ssid = 'luebeck.freifunk.net',
channel = 44,
htmode = 'HT40+',
mesh_ssid = 'ff:ff:ff:ff:ff:ff',
mesh_bssid = 'ff:ff:ff:ff:ff:ff',
mesh_mcast_rate = 12000,
},
--[[ Next-Node
next_node: Howto reach the node you are currently connected to
The node will always be reachable at that address, and it's the same on all nodes. Because next_node packets are redirected within the node itself, there will be no conflicts.
sub
ip4: IPv4 Address to use
ip6: IPv6 Address to use
mac: MAC Address to use
(TODO: What is the purpose of this MAC-Address here?)
]]
next_node = {
ip4 = '10.130.0.1',
ip6 = 'fdef:ffc0:3dd7::1',
mac = '16:41:95:40:f7:dc',
},
--[[ Gateway settings
fastd_mesh_vpn: fastd vpn settings
https://projects.universe-factory.net/projects/fastd/wiki/User_manual
sub
methods: encryption algorithms to use
https://projects.universe-factory.net/projects/fastd/wiki/Methods
When multiple method statements are given, the first one has the highest preference.
mtu: package size
backbone: fastd vpn gateways of your community
sub
limit: Number of gateways each node connects to
On startup, each node tries to connect to every gateway, and then chooses the number of 'limit' fastest gateways it could reach
peers: Gateways
sub sub
key: public fastd key of your gateway
https://github.com/tcatm/ecdsautils
remotes: List of fastd configuration strings to connect to your gateway server
]]
fastd_mesh_vpn = {
methods = {'salsa2012+gmac'},
mtu = 1426,
backbone = {
limit = 2,
peers = {
burgtor = {
key = '657af03e36ff1b8bbe5a5134982a4f110c8523a9a63293870caf548916a95a03',
remotes = {'ipv4 "burgtor.mesh.ffhl.chaotikum.org" port 10000'},
},
holstentor = {
key = '8c660f7511bf101ea1b599fe53af20e1146cd923c9e9d2a3a0d534ee75af9067',
remotes = {'ipv4 "holstentor.mesh.ffhl.chaotikum.org" port 10000'},
},
huextertor = {
key = 'a1b124f43eae4f5929850c09cda825ef35d659e3db4d7746e3d97627e9fa7238',
remotes = {'ipv4 "huextertor.mesh.ffhl.chaotikum.org" port 10000'},
},
muehlentor = {
key = 'bd4ec3cf87bb0042eed2fa121fbc402154d28fb1ae9dff9cdb71bb21892f401a',
remotes = {'ipv4 "muehlentor.mesh.ffhl.chaotikum.org" port 10000'},
},
},
},
},
--[[ Autoupdater settings
branch: Automatically update to this branch
branches: Available branches your community is publishing
sub sub
name: Name of branch (is used when compiling images)
mirrors: List of urls where to find the firmware
just serve the images on port 80 via http. a simple apache file-listing is enough.
see: http://luebeck.freifunk.net/firmware/
probability: How often should a node search for updates
1.0 - perform an update every hour
0.5 - on average, perform an update every two hours
0.0 - inhibit any automatic updates
good_signatures: How many signatures should be valid so the node decides to upgrade itself
pubkeys: public keys by developers used in manifest file of branch
manifest file - see gluon readme
$ make manifest GLUON_BRANCH=mybranch
$ contrib/sign.sh $SECRETKEY.file images/sysupgrade/manifest
]]
autoupdater = {
branch = 'experimental',
branches = {
stable = {
name = 'stable',
mirrors = {'http://1.updates.services.ffhl/stable/sysupgrade'},
probability = 0.08,
good_signatures = 2,
pubkeys = {
'daa19b44bbd7033965e02088127bad9516ba0fea8f34267a777144a23ec8900c', -- Linus
'a8dd60765b07330a4bbfdf8406102befca132881a4b65f3efda32cf2d5b362d9', -- Nils
'323bd3285c4e5547a89cd6da1f2aef67f1654b0928bbd5b104efc9dab2156d0b', -- NeoRaider
},
},
experimental = {
-- DE: Name des "braches" wird beim erstellen von Images / update generiert
name = 'experimental',
mirrors = {'http://1.updates.services.ffhl/experimental/sysupgrade'},
probability = 1.00,
good_signatures = 2,
good_signatures = 1,
-- DE: Oeffentlicher Schluessel / Public Key der Entwickler
pubkeys = {
'496136b37e5f561dfdf523611f14e4b6bc2a745cbc1ab7daffa59fded5f202d1', -- philae
},
},
},
},
--[[ Simple TC settings to limit the bandwidth of the vpn-uplink
mesh_vpn:
sub
ifname: name of the interface/bridge
enabled: default-value
limit_egress: default-value
limit_ingress: default-value
]]
simple_tc = {
mesh_vpn = {
ifname = 'mesh-vpn',
enabled = false,
limit_egress = 200,
limit_ingress = 3000,
},
},
--[[ Config Mode settings
Text shown on local website on node while in config mode (after initial flashing or after a long press and hold on the primary button and reboot). You can use html here.
msg_welcome: Welcome message shown at startup
msg_pubkey: Instructions for the user how your community handles the key exchange
only shown if VPN setting is selected
msg_reboot: Message shown when configuration is finished while the node is rebooting.
Variables
Within the text given here you can use variables which are
replaced when the respective website is delivered to the user.
Variables must be used in the format <%=NAME%>. See msg_pubkey for an example.
hostname hostname of the node
pubkey fastd public key of the node
sysconfig.primary_mac the primary mac of the node, also found printed beneath the device
... other sysconfig.* variables: config_ifname, lan_ifname, wan_ifname
]]
config_mode = {
msg_welcome = [[
-- Used for generated hostnames, e.g. freifunk-abcdef123456.
hostname_prefix = 'freifunk',
-- Name of the community.
site_name = 'Freifunk Lübeck',
-- Shorthand of the community.
site_code = 'ffhl',
-- Prefixes used within the mesh. Both are required.
prefix4 = '10.130.0.0/20',
prefix6 = 'fdef:ffc0:3dd7::/64',
-- Timezone of your community.
-- See http://wiki.openwrt.org/doc/uci/system#time.zones
timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',
-- List of NTP servers in your community.
-- Must be reachable using IPv6!
ntp_servers = {'1.ntp.services.ffhl'},
-- Wireless regulatory domain of your community.
regdom = 'DE',
-- Wireless configuratoin for 2.4 GHz interfaces.
wifi24 = {
-- Wireless channel.
channel = 1,
-- ESSID used for client network.
ssid = 'luebeck.freifunk.net',
-- Specifies the channel width in 802.11n and 802.11ac mode.
-- Possible values are:
-- HT20 (single 20MHz channel),
-- HT40- (2x 20MHz channels, secondary below)
-- HT40+ (2x 20MHz channels, secondary above)
htmode = 'HT20',
-- Adjust these values! ff... will not work!
mesh_ssid = 'ff:ff:ff:ff:ff:ff', -- ESSID used for mesh
mesh_bssid = 'ff:ff:ff:ff:ff:ff', -- BSSID used for mesh
-- Bitrate used for multicast/broadcast packets.
mesh_mcast_rate = 12000,
},
-- Wireless configuration for 5 GHz interfaces.
-- This should be equal to the 2.4 GHz variant, except
-- for channel and htmode.
wifi5 = {
ssid = 'luebeck.freifunk.net',
channel = 44,
htmode = 'HT20',
mesh_ssid = 'ff:ff:ff:ff:ff:ff',
mesh_bssid = 'ff:ff:ff:ff:ff:ff',
mesh_mcast_rate = 12000,
},
-- The next node feature allows clients to always reach the node it is
-- connected to using a known IP address.
next_node = {
-- anycast IPs of all nodes
ip4 = '10.130.0.1',
ip6 = 'fdef:ffc0:3dd7::1',
-- anycast MAC of all nodes
mac = '16:41:95:40:f7:dc',
},
-- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
-- what these options do.
fastd_mesh_vpn = {
-- List of crypto-methods to use.
methods = {'salsa2012+gmac'},
mtu = 1426,
backbone = {
-- Limit number of connected peers to reduce bandwidth.
limit = 2,
-- List of peers.
peers = {
burgtor = {
key = '657af03e36ff1b8bbe5a5134982a4f110c8523a9a63293870caf548916a95a03',
-- This is a list, so you might add multiple entries.
remotes = {'ipv4 "burgtor.mesh.ffhl.chaotikum.org" port 10000'},
},
holstentor = {
key = '8c660f7511bf101ea1b599fe53af20e1146cd923c9e9d2a3a0d534ee75af9067',
remotes = {'ipv4 "holstentor.mesh.ffhl.chaotikum.org" port 10000'},
},
},
},
},
autoupdater = {
-- Default branch. Don't forget to set GLUON_BRANCH when building!
branch = 'stable',
-- List of branches. You may define multiple branches.
branches = {
stable = {
name = 'stable',
-- List of mirrors to fetch images from. IPv6 required!
mirrors = {'http://1.updates.services.ffhl/stable/sysupgrade'},
-- Number of good signatures required.
-- Have multiple maintainers sign your build and only
-- accept it when a sufficient number of them have
-- signed it.
good_signatures = 2,
-- List of public keys of maintainers.
pubkeys = {
'daa19b44bbd7033965e02088127bad9516ba0fea8f34267a777144a23ec8900c', -- Linus
'a8dd60765b07330a4bbfdf8406102befca132881a4b65f3efda32cf2d5b362d9', -- Nils
'323bd3285c4e5547a89cd6da1f2aef67f1654b0928bbd5b104efc9dab2156d0b', -- NeoRaider
},
},
},
},
-- Bandwidth limiting
simple_tc = {
mesh_vpn = {
ifname = 'mesh-vpn',
-- You may enable it by default here.
enabled = false,
-- Default upload limit (kbit/s).
limit_egress = 200,
-- Default download limit (kbit/s).
limit_ingress = 3000,
},
},
-- These strings are shown in config mode. Some HTML is permissible.
--
-- msg_welcome: shown at startup
-- msg_pubkey: shown when VPN is enabled
-- msg_reboot: shown during reboot (after finishing configuration)
--
-- You may use some variables, e.g.:
--
-- <%=hostname%> - the node's hostname
-- <%=pubkey%> - the fastd public key
-- <%=sysconfig.primary_mac%> - the node's primary MAC
config_mode = {
msg_welcome = [[
Willkommen zum Einrichtungsassistenten für deinen neuen Lübecker
Freifunk-Knoten. Fülle das folgende Formular deinen Vorstellungen
entsprechend aus und sende es ab.
]],
msg_pubkey = [[
msg_pubkey = [[
Dies ist der öffentliche Schlüssel deines Freifunk-Knotens. Erst nachdem
er auf den Servern des Lübecker Freifunk-Projektes eingetragen wurde,
kann sich dein Knoten mit dem Lübecker Mesh-VPN zu verbinden. Bitte
......@@ -238,7 +171,7 @@ schicke dazu diesen Schlüssel und den Namen deines Knotens
(<em><%=hostname%></em>) an
<a href="mailto:keys@luebeck.freifunk.net">keys@luebeck.freifunk.net</a>.
]],
msg_reboot = [[
msg_reboot = [[
<p>
Dein Knoten startet gerade neu und wird anschließend versuchen,
sich anschließend mit anderen Freifunk-Knoten in seiner Nähe zu
......@@ -250,5 +183,5 @@ Lübecker Freifunk-Community findest du auf
Viel Spaß mit deinem Knoten und der Erkundung von Freifunk!
</p>
]],
},
},
}
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment

Impressum - Datenschutz