Skip to content
Snippets Groups Projects
Commit 5e46753a authored by Nico's avatar Nico
Browse files

add missing patch for Cudy WR3000 Outdoor support in OpenWRT

parent 8463f847
No related branches found
No related tags found
No related merge requests found
Show whitespace changes
Inline Side-by-side
patches/openwrt/0011-mediatek-filogic-add-support-for-Cudy-AP3000-Outdoor.patch 0 → 100644
+ 307
− 0
View file @ 5e46753a
From: Pawel Dembicki <paweldembicki@gmail.com>
Date: Sun, 4 Aug 2024 22:47:47 +0200
Subject: mediatek: filogic: add support for Cudy AP3000 Outdoor
Hardware highlights:
- MediaTek MT7981 WiSoC
- 256MB DDR3 RAM
- 64MB SPI-NAND
- MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5)
- 1x LED in two colors
- 2x Button
- 1x 1GbE
- Two detachable antenas, two internal pcb antenas
- PoE powered (standalone)
MAC:
LAN MAC: label mac
2.4G MAC: label mac -1
5G MAC: label mac
How to install:
1. Apply Cudy Intermediate OpenWrt image for AP3000 Outdoor V1
2. Install OpenWrt sysupgrade image
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16156
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
diff --git a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
index 6dfa52c291146183c67bc4b1813b48cd9bf0d7dc..8e74c577cd505bbf8b2109d8f34fe8013887dc1e 100644
--- a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
+++ b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
@@ -6,6 +6,7 @@ set_preinit_iface() {
ip link set eth1 up
ifname=eth1
;;
+ cudy,ap3000outdoor-v1|\
cudy,re3000-v1|\
ubnt,unifi-6-lr|\
zyxel,nwa50ax-pro)
diff --git a/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts
new file mode 100644
index 0000000000000000000000000000000000000000..62e406394755ac6ef5722e4070553a24261e88a7
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "mt7981.dtsi"
+
+/ {
+ model = "Cudy AP3000 Outdoor v1";
+ compatible = "cudy,ap3000outdoor-v1", "mediatek,mt7981-spim-snand-rfb";
+
+ aliases {
+ label-mac-device = &gmac1;
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: led@0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_red: led_1 {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ antctrl {
+ /* Not sure if this pin does anything.
+ * It was taken from GPL sources.
+ * Intermediate image doesn't have it.
+ */
+ gpio-export,name = "antctrl";
+ gpio-export,output = <1>;
+ gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ watchdog-hw {
+ compatible = "linux,wdt-gpio";
+ gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
+ hw_algo = "level";
+ hw_margin_ms = <10000>;
+ always-running;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&eth {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ status = "okay";
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "gmii";
+ phy-handle = <&int_gbe_phy>;
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_bdinfo_de00 1>;
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_flash_pins>;
+ status = "okay";
+
+ spi_nand: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+
+ spi-cal-enable;
+ spi-cal-mode = "read-data";
+ spi-cal-datalen = <7>;
+ spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
+ spi-cal-addrlen = <5>;
+ spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
+
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ mediatek,nmbm;
+ mediatek,bmt-max-ratio = <1>;
+ mediatek,bmt-max-reserved-blocks = <64>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "BL2";
+ reg = <0x00000 0x0100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x0100000 0x0080000>;
+ read-only;
+ };
+
+ factory: partition@180000 {
+ label = "Factory";
+ reg = <0x180000 0x0200000>;
+ read-only;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x1000>;
+ };
+ };
+ };
+
+ partition@380000 {
+ label = "bdinfo";
+ reg = <0x380000 0x0040000>;
+ read-only;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_bdinfo_de00: macaddr@de00 {
+ compatible = "mac-base";
+ reg = <0xde00 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+
+ };
+
+ partition@3C0000 {
+ label = "FIP";
+ reg = <0x3C0000 0x0200000>;
+ read-only;
+ };
+
+ partition@580000 {
+ label = "ubi";
+ reg = <0x5C0000 0x4000000>;
+ compatible = "linux,ubi";
+ };
+ };
+ };
+};
+
+
+&pio {
+ spi0_flash_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ };
+};
+
+&wifi {
+ status = "okay";
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index e8ce84dd4b7648e35d6f67f3bfc0287c3c30c584..e61cbea700414326e88fda2c9d80101fee4500ae 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -70,6 +70,7 @@ mediatek_setup_interfaces()
mercusys,mr90x-v1)
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
;;
+ cudy,ap3000outdoor-v1|\
cudy,re3000-v1|\
netgear,wax220|\
ubnt,unifi-6-plus|\
diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
index 053d8e09cdff1df9c49b824529062a0c17c5b7dd..515d341ff4cf57466e2869ad6faeb82ac0318ca6 100644
--- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -67,6 +67,7 @@ case "$board" in
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
;;
+ cudy,ap3000outdoor-v1|\
cudy,m3000-v1|\
cudy,wr3000-v1)
addr=$(mtd_get_mac_binary bdinfo 0xde00)
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index 88b279140c4b500c4cf86b99b2332fca389c5a85..b8636ac90a3eb9d749b80d01babc9bafbd36b680 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -360,6 +360,23 @@ define Device/confiabits_mt7981
endef
TARGET_DEVICES += confiabits_mt7981
+define Device/cudy_ap3000outdoor-v1
+ DEVICE_VENDOR := Cudy
+ DEVICE_MODEL := AP3000 Outdoor
+ DEVICE_VARIANT := v1
+ DEVICE_DTS := mt7981b-cudy-ap3000outdoor-v1
+ DEVICE_DTS_DIR := ../dts
+ SUPPORTED_DEVICES += R51
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 65536k
+ KERNEL_IN_UBI := 1
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
+endef
+TARGET_DEVICES += cudy_ap3000outdoor-v1
+
define Device/cudy_m3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := M3000
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Please register or to comment

Impressum - Datenschutz