Skip to content
Snippets Groups Projects
Commit 424f4cdf authored by Patrick's avatar Patrick Committed by Nico
Browse files

ath79-generic: add TPLink EAP225 Outdoor v3 


[ nrb: refresh patches ]

Signed-off-by: default avatarNico <github@nicoboehr.de>
parent 081a0463
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
patches/openwrt/0011-ath79-support-for-TP-Link-EAP225-Outdoor-v3.patch 0 → 100644
+ 352
− 0
View file @ 424f4cdf
From: Paul Maruhn <paulmaruhn@posteo.de>
Date: Tue, 22 Mar 2022 21:06:42 +0100
Subject: ath79: support for TP-Link EAP225-Outdoor v3
[ nrb: backported from 7e4de89e631aaf56be5375662b7d5ed0f27e26f6 ]
This model is almost identical to the EAP225-Outdoor v1.
Major difference is the RTL8211FS PHY Chipset.
Device specifications:
* SoC: QCA9563 @ 775MHz
* Memory: 128MiB DDR2
* Flash: 16MiB SPI-NOR
* Wireless 2.4GHz (SoC): b/g/n 2x2
* Wireless 5GHz (QCA9886): a/n/ac 2x2 MU-MIMO
* Ethernet (RTL8211FS): 1× 1GbE, PoE
Flashing instructions:
* ssh into target device with recent (>= v1.6.0) firmware
* run `cliclientd stopcs` on target device
* upload factory image via web interface
Debricking:
To recover the device, you need access to the serial port. This requires
fine soldering to test points, or the use of probe pins.
* Open the case and solder wires to the test points: RXD, TXD and TPGND4
* Use a 3.3V UART, 115200 baud, 8n1
* Interrupt bootloader by holding ctrl+B during boot
* upload initramfs via built-in tftp client and perform sysupgrade
setenv ipaddr 192.168.1.1 # default, change as required
setenv serverip 192.168.1.10 # default, change as required
tftp 0x80800000 initramfs.bin
bootelf $fileaddr
MAC addresses:
MAC address (as on device label) is stored in device info partition at
an offset of 8 bytes. ath9k device has same address as ethernet, ath10k
uses address incremented by 1.
From stock ifconfig:
ath0 Link encap:Ethernet HWaddr D8:...:2E
ath10 Link encap:Ethernet HWaddr D8:...:2F
br0 Link encap:Ethernet HWaddr D8:...:2E
eth0 Link encap:Ethernet HWaddr D8:...:2E
Signed-off-by: Paul Maruhn <paulmaruhn@posteo.de>
Co-developed-by: Philipp Rothmann <philipprothmann@posteo.de>
Signed-off-by: Philipp Rothmann <philipprothmann@posteo.de>
[Add pre-calibraton nvme-cells]
Tested-by: Tido Klaassen <tido_ff@4gh.eu>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Signed-off-by: Nico <github@nicoboehr.de>
diff --git a/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v3.dts b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v3.dts
new file mode 100644
index 0000000000000000000000000000000000000000..e5914c9a55069e5baa5c7b989f3405c762e4d29d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_tplink_eap225-outdoor-v3.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9563_tplink_eap2x5-1port.dtsi"
+
+/ {
+ compatible = "tplink,eap225-outdoor-v3", "qca,qca9563";
+ model = "TP-Link EAP225-Outdoor v3";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_amber;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_status_amber: status_amber {
+ label = "amber:status";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&art {
+ precalibration_ath10k: pre-calibration@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+};
+
+&eth0 {
+ phy-handle = <&phy6>;
+ phy-mode = "sgmii";
+};
+
+&mdio0 {
+ phy6: ethernet-phy@6 {
+ reg = <6>;
+ };
+};
+
+&pcie {
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0 0 0 0 0>;
+
+ mac-address-increment = <1>;
+
+ nvmem-cells = <&macaddr_info_8>, <&precalibration_ath10k>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 8f9516b8c681fd09c37fb183a63c17cf84f94bfc..b17ef03afcdf12c7a2c51fa8b0eaf3c90ad6fdd9 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -78,6 +78,7 @@ ath79_setup_interfaces()
tplink,cpe610-v2|\
tplink,cpe710-v1|\
tplink,eap225-outdoor-v1|\
+ tplink,eap225-outdoor-v3|\
tplink,eap225-v1|\
tplink,eap225-v3|\
tplink,eap245-v1|\
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index fed572c884c75bd21081c7c22dd4652ecefdd993..3d3a45711302b7a73c914d80ec0d309878813149 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -401,6 +401,17 @@ define Device/tplink_eap225-outdoor-v1
endef
TARGET_DEVICES += tplink_eap225-outdoor-v1
+define Device/tplink_eap225-outdoor-v3
+ $(Device/tplink-eap2x5)
+ SOC := qca9563
+ IMAGE_SIZE := 13824k
+ DEVICE_MODEL := EAP225-Outdoor
+ DEVICE_VARIANT := v3
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
+ TPLINK_BOARD_ID := EAP225-V3
+endef
+TARGET_DEVICES += tplink_eap225-outdoor-v3
+
define Device/tplink_eap225-v1
$(Device/tplink-eap2x5)
SOC := qca9563
diff --git a/tools/firmware-utils/patches/003-tplink-safeloader-join-EAP225-V3-compatible-devices.patch b/tools/firmware-utils/patches/003-tplink-safeloader-join-EAP225-V3-compatible-devices.patch
new file mode 100644
index 0000000000000000000000000000000000000000..f02ce72973c11e9e4dbb93f43e39cf073732f392
--- /dev/null
+++ b/tools/firmware-utils/patches/003-tplink-safeloader-join-EAP225-V3-compatible-devices.patch
@@ -0,0 +1,61 @@
+From a1f0f969f52cb73f77b44ea8bb9e654e18ca3dbb Mon Sep 17 00:00:00 2001
+From: Sander Vanheule <sander@svanheule.net>
+Date: Thu, 26 May 2022 09:11:29 +0200
+Subject: [PATCH 1/4] tplink-safeloader: join EAP225-V3 compatible devices
+
+Since FW v5.0.0, TP-Link has provided unified firmware images for
+EAP225-v3 and EAP225-Outdoor-v1 devices. Although there may be hardware
+differences, the relevant details for image generation are identical.
+
+More recently, the following devices have also been added to the support
+list:
+ - EAP225-v3.20
+ - EAP225-Outdoor-v3
+ - EAP225-v4
+
+The country codes appended the device descriptors were introduced with
+FW v5.0.7: "Combined firmware versions for different countries/regions."
+The release notes provide no further upgrade instructions, so these
+firmware images should be backwards compatible.
+
+Add the new compatible devices, with region codes, to the support list
+of the EAP225-V3 board ID. The now redundant EAP225-OUTDOOR-V1 ID will
+be dropped later.
+
+Signed-off-by: Sander Vanheule <sander@svanheule.net>
+---
+ src/tplink-safeloader.c | 14 ++++++++++++--
+ 1 file changed, 12 insertions(+), 2 deletions(-)
+
+diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
+index fc46124..a42ce6a 100644
+--- a/src/tplink-safeloader.c
++++ b/src/tplink-safeloader.c
+@@ -1603,12 +1603,22 @@ static struct device_info boards[] = {
+ .last_sysupgrade_partition = "file-system"
+ },
+
+- /** Firmware layout for the EAP225 v3 */
++ /** Firmware layout for the EAP225 v3
++ * Also compatible with:
++ * - EAP225 v3.20
++ * - EAP225 v4
++ * - EAP225-Outdoor v1
++ * - EAP225-Outdoor v3
++ * */
+ {
+ .id = "EAP225-V3",
+ .support_list =
+ "SupportList:\r\n"
+- "EAP225(TP-Link|UN|AC1350-D):3.0\r\n",
++ "EAP225(TP-Link|UN|AC1350-D):3.0\r\n"
++ "EAP225(TP-Link|UN|AC1350-D):3.20\r\n"
++ "EAP225(TP-Link|UN|AC1350-D):4.0 CA\r\n"
++ "EAP225-Outdoor(TP-Link|UN|AC1350-D):1.0\r\n"
++ "EAP225-Outdoor(TP-Link|UN|AC1350-D):3.0 CA,JP\r\n",
+ .part_trail = PART_TRAIL_NONE,
+ .soft_ver = SOFT_VER_DEFAULT,
+ .soft_ver_compat_level = 1,
+--
+2.30.2
+
diff --git a/tools/firmware-utils/patches/004-tplink-safeloader-add-regionless-EAP225-V3-IDs.patch b/tools/firmware-utils/patches/004-tplink-safeloader-add-regionless-EAP225-V3-IDs.patch
new file mode 100644
index 0000000000000000000000000000000000000000..13f433b7e751b8fd54d790fbcdee22a426a65d79
--- /dev/null
+++ b/tools/firmware-utils/patches/004-tplink-safeloader-add-regionless-EAP225-V3-IDs.patch
@@ -0,0 +1,36 @@
+From 17896956efd9d42baebf9558242dcdf4b5a9cbe1 Mon Sep 17 00:00:00 2001
+From: Sander Vanheule <sander@svanheule.net>
+Date: Sun, 26 Jun 2022 16:30:34 +0200
+Subject: [PATCH 2/4] tplink-safeloader: add regionless EAP225-V3 IDs
+
+Devices whose model ID does not contain a region identifier will not
+match the "CA" and "CA,JP" qualified model IDs in the current EAP225-V3
+SupportList. This results in the stock firmware giving the following
+error when trying to flash a factory image:
+ Upgrade failed because the firmware is incompatible
+
+Add the IDs without region qualifiers to also support these devices.
+
+Signed-off-by: Sander Vanheule <sander@svanheule.net>
+---
+ src/tplink-safeloader.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
+index a42ce6a..3f58f95 100644
+--- a/src/tplink-safeloader.c
++++ b/src/tplink-safeloader.c
+@@ -1616,8 +1616,10 @@ static struct device_info boards[] = {
+ "SupportList:\r\n"
+ "EAP225(TP-Link|UN|AC1350-D):3.0\r\n"
+ "EAP225(TP-Link|UN|AC1350-D):3.20\r\n"
++ "EAP225(TP-Link|UN|AC1350-D):4.0\r\n"
+ "EAP225(TP-Link|UN|AC1350-D):4.0 CA\r\n"
+ "EAP225-Outdoor(TP-Link|UN|AC1350-D):1.0\r\n"
++ "EAP225-Outdoor(TP-Link|UN|AC1350-D):3.0\r\n"
+ "EAP225-Outdoor(TP-Link|UN|AC1350-D):3.0 CA,JP\r\n",
+ .part_trail = PART_TRAIL_NONE,
+ .soft_ver = SOFT_VER_DEFAULT,
+--
+2.30.2
+
diff --git a/tools/firmware-utils/patches/005-tplink-safeloader-fix-EAP225-Outdoor-model-IDs.patch b/tools/firmware-utils/patches/005-tplink-safeloader-fix-EAP225-Outdoor-model-IDs.patch
new file mode 100644
index 0000000000000000000000000000000000000000..6d2473d7ecdf2564c5db82ee89f59fb6e309b7fb
--- /dev/null
+++ b/tools/firmware-utils/patches/005-tplink-safeloader-fix-EAP225-Outdoor-model-IDs.patch
@@ -0,0 +1,37 @@
+From f7bdb17991043bf9ea14489f105437db31f772bd Mon Sep 17 00:00:00 2001
+From: Sander Vanheule <sander@svanheule.net>
+Date: Sun, 26 Jun 2022 16:43:07 +0200
+Subject: [PATCH 3/4] tplink-safeloader: fix EAP225-Outdoor model IDs
+
+The model IDs for EAP225-Outdoor v1 and EAP225-Outdoor v3 contain
+"AC1200". The corresponding identifiers grouped under EAP225-V3 contain
+"AC1350" however, which is a copy-paste error from the EAP225 v3/v3.2/v4
+IDs. Modify the strings in SupportList to actually match the ones on devices.
+
+Fixes: 9563fe8e78cb ("tplink-safeloader: add regionless EAP225-V3 IDs")
+Fixes: 365458e00ed7 ("tplink-safeloader: join EAP225-V3 compatible devices")
+Signed-off-by: Sander Vanheule <sander@svanheule.net>
+---
+ src/tplink-safeloader.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
+index 3f58f95..c941159 100644
+--- a/src/tplink-safeloader.c
++++ b/src/tplink-safeloader.c
+@@ -1618,9 +1618,9 @@ static struct device_info boards[] = {
+ "EAP225(TP-Link|UN|AC1350-D):3.20\r\n"
+ "EAP225(TP-Link|UN|AC1350-D):4.0\r\n"
+ "EAP225(TP-Link|UN|AC1350-D):4.0 CA\r\n"
+- "EAP225-Outdoor(TP-Link|UN|AC1350-D):1.0\r\n"
+- "EAP225-Outdoor(TP-Link|UN|AC1350-D):3.0\r\n"
+- "EAP225-Outdoor(TP-Link|UN|AC1350-D):3.0 CA,JP\r\n",
++ "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n"
++ "EAP225-Outdoor(TP-Link|UN|AC1200-D):3.0\r\n"
++ "EAP225-Outdoor(TP-Link|UN|AC1200-D):3.0 CA,JP\r\n",
+ .part_trail = PART_TRAIL_NONE,
+ .soft_ver = SOFT_VER_DEFAULT,
+ .soft_ver_compat_level = 1,
+--
+2.30.2
+
diff --git a/tools/firmware-utils/patches/006-tplink-safeloader-drop-unqualified-EAP225-V3-IDs.patch b/tools/firmware-utils/patches/006-tplink-safeloader-drop-unqualified-EAP225-V3-IDs.patch
new file mode 100644
index 0000000000000000000000000000000000000000..f452087f3d504326509bc2bc664bced97d6776b5
--- /dev/null
+++ b/tools/firmware-utils/patches/006-tplink-safeloader-drop-unqualified-EAP225-V3-IDs.patch
@@ -0,0 +1,42 @@
+From 2c91e01e62eaa0ad4336a50cea03851bcf0fda10 Mon Sep 17 00:00:00 2001
+From: Sander Vanheule <sander@svanheule.net>
+Date: Mon, 27 Jun 2022 18:31:24 +0200
+Subject: [PATCH 4/4] tplink-safeloader: drop unqualified EAP225-V3 IDs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+After adding the regionless identifiers in commit 9563fe8e78cb
+("tplink-safeloader: add regionless EAP225-V3 IDs"), the generated
+support-list partition exceeded the allocated space of 256 bytes. This
+resulted in the tool failing to generate factory images with the
+following warning:
+ support-list partition too big (more than 256 bytes): Success
+
+Although this message reports "Success", the tool actually fails with a
+return code of 1.
+
+This essentialy reverts commit 9563fe8e78cb, since the region-qualified
+IDs are also compatible with the non region-qualified devices. The
+change makes the generated support-list partition fit within the
+allocated space again.
+
+Tested-by: Andre Klärner <kandre@ak-online.be>
+Signed-off-by: Sander Vanheule <sander@svanheule.net>
+---
+ src/tplink-safeloader.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/src/tplink-safeloader.c
++++ b/src/tplink-safeloader.c
+@@ -1659,10 +1659,8 @@ static struct device_info boards[] = {
+ "SupportList:\r\n"
+ "EAP225(TP-Link|UN|AC1350-D):3.0\r\n"
+ "EAP225(TP-Link|UN|AC1350-D):3.20\r\n"
+- "EAP225(TP-Link|UN|AC1350-D):4.0\r\n"
+ "EAP225(TP-Link|UN|AC1350-D):4.0 CA\r\n"
+ "EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0\r\n"
+- "EAP225-Outdoor(TP-Link|UN|AC1200-D):3.0\r\n"
+ "EAP225-Outdoor(TP-Link|UN|AC1200-D):3.0 CA,JP\r\n",
+ .part_trail = PART_TRAIL_NONE,
+ .soft_ver = SOFT_VER_DEFAULT,
targets/ath79-generic
+ 4
− 0
View file @ 424f4cdf
...@@ -481,6 +481,10 @@ device('tp-link-eap225-outdoor-v1', 'tplink_eap225-outdoor-v1', { ...@@ -481,6 +481,10 @@ device('tp-link-eap225-outdoor-v1', 'tplink_eap225-outdoor-v1', {
packages = ATH10K_PACKAGES_QCA9888, packages = ATH10K_PACKAGES_QCA9888,
}) })
device('tp-link-eap225-outdoor-v3', 'tplink_eap225-outdoor-v3', {
packages = ATH10K_PACKAGES_QCA9888,
})
device('tp-link-re355-v1', 'tplink_re355-v1', { device('tp-link-re355-v1', 'tplink_re355-v1', {
manifest_aliases = { manifest_aliases = {
'tp-link-re355', -- upgrade from OpenWrt 19.07 'tp-link-re355', -- upgrade from OpenWrt 19.07
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Please register or to comment

Impressum - Datenschutz