Add OpenWrt patches for D-Link DIR-615 rev. C1

patches/openwrt/0013-ar71xx-add-default-LED-configuration-for-D-Link-DIR-615-rev.-C1.patch

+From: Matthias Schiffer <mschiffer@universe-factory.net>
+Date: Wed, 28 Jan 2015 15:02:54 +0100
+Subject: ar71xx: add default LED configuration for D-Link DIR-615 rev. C1
+
+This patch adds an entry in the uci-defaults' led-file to configure the
+WAN and WLAN LEDs by default.
+
+Signed-off-by: Vincent Wiemann <me@bibbl.com>
+
+diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+index 2676b48..ee90c52 100755
+--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
++++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+@@ -122,6 +122,11 @@ dir-615-e4)
+ 	ucidef_set_led_switch "lan4" "LAN4" "d-link:green:lan4" "switch0" "0x10"
+ 	;;
+ 
++dir-615-c1)
++	ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1"
++	ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt"
++	;;
++
+ dir-825-b1)
+ 	ucidef_set_led_usbdev "usb" "USB" "d-link:blue:usb" "1-1"
+ 	;;

patches/openwrt/0014-ar71xx-fix-D-Link-DIR-615-rev.-C1-WLAN-MAC-address.patch

+From: Matthias Schiffer <mschiffer@universe-factory.net>
+Date: Wed, 28 Jan 2015 14:56:03 +0100
+Subject: ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address
+
+Fix the WLAN MAC address to match the one printed on the label by using the
+correct address from the ART instead of the address of the LAN interface.
+
+Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
+
+diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
+index 425be30..e55a43f 100644
+--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
++++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
+@@ -38,6 +38,8 @@
+ #define DIR_615C1_CONFIG_ADDR		0x1f020000
+ #define DIR_615C1_CONFIG_SIZE		0x10000
+ 
++#define DIR_615C1_WLAN_MAC_ADDR		0x1f3fffb4
++
+ static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
+ 	{
+ 		.name		= "d-link:orange:status",
+@@ -96,16 +98,16 @@ static void __init dir_615c1_setup(void)
+ {
+ 	const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
+ 	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+-	u8 mac[6];
+-	u8 *wlan_mac = NULL;
++	u8 mac[ETH_ALEN], wlan_mac[ETH_ALEN];
+ 
+ 	if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
+ 				       "lan_mac=", mac) == 0) {
+ 		ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ 		ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+-		wlan_mac = mac;
+ 	}
+ 
++	ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615C1_WLAN_MAC_ADDR), wlan_mac);
++
+ 	ath79_register_mdio(0, DIR_615C1_MDIO_MASK);
+ 
+ 	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;