-
Martin Weinelt authored- [x] Must be flashable from vendor firmware - [x] Web interface - [ ] TFTP (untested, but possible according to OpenWrt wiki) - [ ] Other: <specify> - [x] Must support upgrade mechanism - [x] Must have working sysupgrade - [x] Must keep/forget configuration (`sysupgrade [-n]`, `firstboot`) - [x] Gluon profile name matches autoupdater image name (`lua -e 'print(require("platform_info").get_image_name())'`) - [x] Reset/WPS/... button must return device into config mode - [x] Primary MAC address should match address on device label (or packaging) (https://gluon.readthedocs.io/en/latest/dev/hardware.html#notes) - When re-adding a device that was supported by an earlier version of Gluon, a factory reset must be performed before checking the primary MAC address, as the setting from the old version is not reset otherwise. - Wired network - [x] should support all network ports on the device - [x] must have correct port assignment (WAN/LAN) - On devices supplied via PoE, there is usually no explicit WAN/LAN labeling on the hardware. The PoE input should be the WAN port in this case. - Wireless network (if applicable) - [x] Association with AP must be possible on all radios - [x] Association with 802.11s mesh must work on all radios - [x] AP+mesh mode must work in parallel on all radios - LED mapping - Power/system LED - [x] Lit while the device is on - [x] Should display config mode blink sequence (https://gluon.readthedocs.io/en/latest/features/configmode.html) - Radio LEDs - [x] Should map to their respective radio - [x] Should show activity - Switch port LEDs - [x] Should map to their respective port (or switch, if only one led present) - [x] Should show link state and activityMartin Weinelt authored- [x] Must be flashable from vendor firmware - [x] Web interface - [ ] TFTP (untested, but possible according to OpenWrt wiki) - [ ] Other: <specify> - [x] Must support upgrade mechanism - [x] Must have working sysupgrade - [x] Must keep/forget configuration (`sysupgrade [-n]`, `firstboot`) - [x] Gluon profile name matches autoupdater image name (`lua -e 'print(require("platform_info").get_image_name())'`) - [x] Reset/WPS/... button must return device into config mode - [x] Primary MAC address should match address on device label (or packaging) (https://gluon.readthedocs.io/en/latest/dev/hardware.html#notes) - When re-adding a device that was supported by an earlier version of Gluon, a factory reset must be performed before checking the primary MAC address, as the setting from the old version is not reset otherwise. - Wired network - [x] should support all network ports on the device - [x] must have correct port assignment (WAN/LAN) - On devices supplied via PoE, there is usually no explicit WAN/LAN labeling on the hardware. The PoE input should be the WAN port in this case. - Wireless network (if applicable) - [x] Association with AP must be possible on all radios - [x] Association with 802.11s mesh must work on all radios - [x] AP+mesh mode must work in parallel on all radios - LED mapping - Power/system LED - [x] Lit while the device is on - [x] Should display config mode blink sequence (https://gluon.readthedocs.io/en/latest/features/configmode.html) - Radio LEDs - [x] Should map to their respective radio - [x] Should show activity - Switch port LEDs - [x] Should map to their respective port (or switch, if only one led present) - [x] Should show link state and activity
ramips-mt7621 1.31 KiB
-- ASUS
device('asus-rt-ac57u', 'asus_rt-ac57u', {
factory = false,
})
-- D-Link
device('d-link-dir-860l-b1', 'dlink_dir-860l-b1')
-- Netgear
device('netgear-ex6150', 'netgear_ex6150', {
factory_ext = '.chk',
})
device('netgear-r6220', 'netgear_r6220', {
factory_ext = '.img',
})
device('netgear-wndr3700-v5', 'netgear_wndr3700-v5', {
factory = false,
broken = true, -- untested
manifest_aliases = {
'netgear-wndr3700v5',
},
})
-- TP-Link
device('tp-link-re650-v1', 'tplink_re650-v1')
-- Ubiquiti
device('ubiquiti-unifi-6-lite', 'ubnt_unifi-6-lite', {
factory = false,
})
-- Xiaomi
device('xiaomi-mi-router-4a-gigabit-edition', 'xiaomi_mi-router-4a-gigabit', {
factory = false,
})
-- ZBT
device('zbtlink-zbt-wg3526-16m', 'zbtlink_zbt-wg3526-16m', {
factory = false,
manifest_aliases = {
'zbt-wg3526',
'zbt-wg3526-16m',
},
})
device('zbtlink-zbt-wg3526-32m', 'zbtlink_zbt-wg3526-32m', {
factory = false,
manifest_aliases = {
'zbt-wg3526-32m',
},
})
-- Devices without WLAN
-- Ubiquiti
device('ubiquiti-edgerouter-x', 'ubnt_edgerouter-x', {
factory = false,
packages = {'-hostapd-mini'},
manifest_aliases = {
'ubnt-erx',
},
})
device('ubiquiti-edgerouter-x-sfp', 'ubnt_edgerouter-x-sfp', {
factory = false,
packages = {'-hostapd-mini'},
manifest_aliases = {
'ubnt-erx-sfp',
},
})