patches/lede/0081-ar71xx-increase-kernel-partition-size-for-TP-Link-RE450-v1.patch

-From: Piotr Dymacz <pepe2k@gmail.com>
-Date: Mon, 6 Nov 2017 23:17:24 +0100
-Subject: ar71xx: increase kernel partition size for TP-Link RE450 v1
-
-This increases kernel partition size and fixes rootfs (file-system)
-partition size on TP-Link RE450 v1. Also, while we are at it, switch
-from statically defined kernel and rootfs partitions in kernel cmdline
-to "tplink-fw" mtd splitter.
-
-Fixes: FS#1072.
-
-Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
-
-diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
-index 1a6e58fca882fc9d122c184ee8167537751acf25..60dfe0e3edafcadad4ddc08be7645b49f269907c 100644
---- a/target/linux/ar71xx/image/tp-link.mk
-+++ b/target/linux/ar71xx/image/tp-link.mk
-@@ -207,7 +207,7 @@ TARGET_DEVICES += cpe210-220 cpe510-520 wbs210 wbs510
- define Device/re450
-   DEVICE_TITLE := TP-LINK RE450
-   DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
--  MTDPARTS := spi0.0:128k(u-boot)ro,1344k(kernel),4672k(rootfs),64k(pation-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro,6016k@0x20000(firmware)
-+  MTDPARTS := spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro
-   IMAGE_SIZE := 7936k
-   BOARDNAME := RE450
-   TPLINK_BOARD_NAME := RE450
-diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
-index ba86c71d870c8f38abb92c657c3656086a7782be..23b69f3bd0eb66aca650eb2ffd7d5cd2a7cb5194 100644
---- a/tools/firmware-utils/src/tplink-safeloader.c
-+++ b/tools/firmware-utils/src/tplink-safeloader.c
-@@ -689,8 +689,8 @@ static struct device_info boards[] = {
- 		*/
- 		.partitions = {
- 			{"fs-uboot", 0x00000, 0x20000},
--			{"os-image", 0x20000, 0x150000},
--			{"file-system", 0x170000, 0x4a0000},
-+			{"os-image", 0x20000, 0x180000},
-+			{"file-system", 0x1a0000, 0x460000},
- 			{"partition-table", 0x600000, 0x02000},
- 			{"default-mac", 0x610000, 0x00020},
- 			{"pin", 0x610100, 0x00020},

patches/lede/0082-include-kernel.mk-build-kmod-packages-with-empty-FILES.patch

-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Tue, 10 Apr 2018 09:03:52 +0200
-Subject: include/kernel.mk: build kmod packages with empty FILES
-
-kmod packages without FILES did not have an install step defined, leading
-to no package being built. This affected netfilter/iptables packages, which
-filter out builtin modules from FILES.
-
-Not building a package that it is selected in .config is problematic, as
-the generated empty package may be necessary to satisfy dependencies.
-
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
-
-diff --git a/include/kernel.mk b/include/kernel.mk
-index b1d0e8d927cb462b486cfd645d68963f1b6ab8ff..d8d457fe7a5d3584d8aa4e27430da84533c85ed0 100644
---- a/include/kernel.mk
-+++ b/include/kernel.mk
-@@ -194,8 +194,7 @@ $(call KernelPackage/$(1)/config)
-   $(call KernelPackage/depends)
- 
-   ifneq ($(if $(filter-out %=y %=n %=m,$(KCONFIG)),$(filter m y,$(foreach c,$(filter-out %=y %=n %=m,$(KCONFIG)),$($(c)))),.),)
--    ifneq ($(strip $(FILES)),)
--      define Package/kmod-$(1)/install
-+    define Package/kmod-$(1)/install
- 		  @for mod in $$(call version_filter,$$(FILES)); do \
- 			if grep -q "$$$$$$$${mod##$(LINUX_DIR)/}" "$(LINUX_DIR)/modules.builtin"; then \
- 				echo "NOTICE: module '$$$$$$$$mod' is built-in."; \
-@@ -209,8 +208,7 @@ $(call KernelPackage/$(1)/config)
- 		  done;
- 		  $(call ModuleAutoLoad,$(1),$$(1),$(AUTOLOAD))
- 		  $(call KernelPackage/$(1)/install,$$(1))
--      endef
--    endif
-+    endef
-   $(if $(CONFIG_PACKAGE_kmod-$(1)),
-     else
-       compile: $(1)-disabled

patches/lede/0083-build-move-lzma2eva-build-step-to-image-commands.mk.patch

-From: Mathias Kresin <dev@kresin.me>
-Date: Sat, 25 Mar 2017 19:18:37 +0100
-Subject: build: move lzma2eva build step to image-commands.mk
-
-Move it to image-commands.mk so that it can used by other targets with
-eva based boards as well.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
-
-diff --git a/include/image-commands.mk b/include/image-commands.mk
-index ec35e0fcfe97d9d98c731459d1f1681d2bcfe5ad..19d98feefe02b6deb43735ccd436aac39fc0a8ab 100644
---- a/include/image-commands.mk
-+++ b/include/image-commands.mk
-@@ -11,6 +11,11 @@ define Build/uImage
- 	mv $@.new $@
- endef
- 
-+define Build/eva-image
-+	$(STAGING_DIR_HOST)/bin/lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ $@.new
-+	mv $@.new $@
-+endef
-+
- define Build/netgear-chk
- 	$(STAGING_DIR_HOST)/bin/mkchkimg \
- 		-o $@.new \
-diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
-index a96e528aab2c5c5c95f01b087f589cecc57c6e51..2cac925bfd95fedd5f76f30e72300cc0fd7d37a9 100644
---- a/target/linux/lantiq/image/Makefile
-+++ b/target/linux/lantiq/image/Makefile
-@@ -20,9 +20,8 @@ else
-   UBIFS_OPTS := -m 2048 -e 126KiB -c 4096
- endif
- 
--define Build/eva-image
--	lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ $@.new
--	( dd if=$@.new bs=64k conv=sync; cat ./eva.dummy.squashfs; ) > $@
-+define Build/append-avm-fakeroot
-+	cat ./eva.dummy.squashfs >> $@
- endef
- 
- define Build/dgn3500-sercom-footer
-@@ -104,6 +103,8 @@ endef
- 
- define Device/AVM
-   KERNEL := kernel-bin | append-dtb | lzma | eva-image
-+  IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-avm-fakeroot | \
-+	append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
- endef
- 
- ifeq ($(SUBTARGET),xway_legacy)

patches/lede/0084-ar71xx-add-support-for-Fritz-Box-4020.patch

-From: David Bauer <mail@david-bauer.net>
-Date: Tue, 24 Apr 2018 19:52:13 +0200
-Subject: ar71xx: add support for Fritz!Box 4020
-
-This commit adds support for the AVM Fritz!Box 4020 WiFi-router.
-
-SoC:   Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
-RAM:   Winbond W971GG6KB-25
-FLASH: Macronix MX25L12835F
-WiFi:  QCA9561 b/g/n 3x3 450Mbit/s
-USB:   1x USB 2.0
-IN:    WPS button, WiFi button
-OUT:   Power LED green, Internet LED green, WLAN LED green,
-       LAN LED green, INFO LED green, INFO LED red
-UART:  Header Next to Black metal shield
-       Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
-       The Serial setting is 115200-8-N-1.
-
-Tested and working:
- - Ethernet (LAN + WAN)
- - WiFi (correct MAC)
- - Installation via EVA bootloader
- - OpenWRT sysupgrade
- - Buttons
- - LEDs
-
-Not working:
- - USB port
-
-Installation via EVA:
-In the first seconds after Power is connected, the bootloader will
-listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded
-like following:
-
-  ftp> quote USER adam2
-  ftp> quote PASS adam2
-  ftp> binary
-  ftp> debug
-  ftp> passive
-  ftp> quote MEDIA FLSH
-  ftp> put openwrt-sysupgrade.bin mtd1
-
-Note that this procedure might take up to two minutes. After transfer is
-complete you need to powercycle the device to boot OpenWRT.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-
-diff --git a/include/image-commands.mk b/include/image-commands.mk
-index 19d98feefe02b6deb43735ccd436aac39fc0a8ab..7e77b878361ef5a4f6278733d25b0a1fed0ce5ff 100644
---- a/include/image-commands.mk
-+++ b/include/image-commands.mk
-@@ -16,6 +16,16 @@ define Build/eva-image
- 	mv $@.new $@
- endef
- 
-+define Build/append-squashfs-fakeroot-be
-+	rm -rf $@.fakefs $@.fakesquashfs
-+	mkdir $@.fakefs
-+	$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
-+		$@.fakefs $@.fakesquashfs \
-+		-noappend -root-owned -be -nopad -b 65536 \
-+		$(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
-+	cat $@.fakesquashfs >> $@
-+endef
-+
- define Build/netgear-chk
- 	$(STAGING_DIR_HOST)/bin/mkchkimg \
- 		-o $@.new \
-diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-index f9483e9a706fbd98ce6a42e968bc0d31e9da5c84..e8b13af7c24dea86519c962fa6381fd75971e8b9 100755
---- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
-+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-@@ -305,6 +305,12 @@ dlan-pro-1200-ac)
- 	ucidef_set_led_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0"
- 	ucidef_set_led_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
- 	;;
-+fritz4020)
-+	ucidef_set_led_default "power" "Power" "$board:green:power" "1"
-+	ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
-+	ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
-+	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
-+	;;
- gl-ar150|\
- gl-ar300|\
- gl-ar300m|\
-diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
-index 1690172b5dfac1e1aa278c38c27ba64cfd61ade0..1018ab4449f896d565b57ecbdc73b7e3d7fbe486 100755
---- a/target/linux/ar71xx/base-files/etc/board.d/02_network
-+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
-@@ -207,6 +207,7 @@ ar71xx_setup_interfaces()
- 		;;
- 	archer-c58-v1|\
- 	archer-c59-v1|\
-+	fritz4020|\
- 	rb-450g)
- 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
- 		ucidef_add_switch "switch0" \
-diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
-index 945167bee6f7dad76bc650a2bb8a7a71f96b738d..7cb708ebe2e9e7546f165022233d17224905a49c 100644
---- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
-+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
-@@ -40,6 +40,24 @@ ath9k_ubi_eeprom_extract() {
- 		ath9k_eeprom_die "failed to extract from $ubi"
- }
- 
-+ath9k_eeprom_extract_reverse() {
-+	local part=$1
-+	local offset=$2
-+	local count=$3
-+	local mtd
-+	local reversed
-+	local caldata
-+
-+	mtd=$(find_mtd_chardev "$part")
-+	reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
-+
-+	for byte in $reversed; do
-+		caldata="\x${byte}${caldata}"
-+	done
-+
-+	printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
-+}
-+
- ath9k_patch_firmware_mac() {
- 	local mac=$1
- 
-@@ -58,6 +76,9 @@ case "$FIRMWARE" in
- 		ath9k_eeprom_extract "art" 4096 2048
- 		ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0) +1)
- 		;;
-+	fritz4020)
-+		ath9k_eeprom_extract_reverse "urlader" 5441 1088
-+		;;
- 	mr18)
- 		. /lib/upgrade/nand.sh
- 
-diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-index 59ede17653bbb1994ce9fa734c86c877aedf67e4..a815ffe07322c20cddaa3c4f97e3bf62a3cf15ec 100755
---- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
-+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-@@ -638,6 +638,9 @@ ar71xx_board_detect() {
- 		name="gl-inet"
- 		gl_inet_board_detect
- 		;;
-+	*"FRITZ!Box 4020")
-+		name="fritz4020"
-+		;;
- 	*"GL AR150")
- 		name="gl-ar150"
- 		;;
-diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-index 5e8a06a7ae70ec349693c09deedbfce41a52cfc2..491b5d5a98b44844f14441d4024f2ad9667186e0 100755
---- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-@@ -612,6 +612,9 @@ platform_check_image() {
- 
- 		return 0;
- 		;;
-+	fritz4020)
-+		return 0
-+		;;
- 	esac
- 
- 	echo "Sysupgrade is not yet supported on $board."
-diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
-index 396a4fa02adb37c6e5f9f7f1cc40fd1014361654..45bf500643837a7270b45e32b22225c06c5fb841 100644
---- a/target/linux/ar71xx/config-4.4
-+++ b/target/linux/ar71xx/config-4.4
-@@ -106,6 +106,7 @@ CONFIG_ATH79_MACH_ESR1750=y
- CONFIG_ATH79_MACH_ESR900=y
- CONFIG_ATH79_MACH_EW_DORIN=y
- CONFIG_ATH79_MACH_F9K1115V2=y
-+CONFIG_ATH79_MACH_FRITZ4020=y
- CONFIG_ATH79_MACH_GL_AR150=y
- CONFIG_ATH79_MACH_GL_AR300=y
- CONFIG_ATH79_MACH_GL_AR300M=y
-@@ -373,6 +374,7 @@ CONFIG_MTD_PHYSMAP=y
- CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
- CONFIG_MTD_REDBOOT_PARTS=y
- CONFIG_MTD_SPI_NOR=y
-+CONFIG_MTD_SPLIT_EVA_FW=y 
- CONFIG_MTD_SPLIT_FIRMWARE=y
- CONFIG_MTD_SPLIT_LZMA_FW=y
- CONFIG_MTD_SPLIT_SEAMA_FW=y
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
-index 4c9012acc6b4c40d88ffc8752086cac86b9b9c92..46366e0d922808e5e14fed0f2b5409cda11afd26 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
-@@ -1918,3 +1918,12 @@ config ATH79_MACH_TL_WPA8630
- 	select ATH79_DEV_LEDS_GPIO
- 	select ATH79_DEV_M25P80
- 	select ATH79_DEV_WMAC
-+
-+config ATH79_MACH_FRITZ4020
-+	bool "AVM FRITZ!Box 4020 support"
-+	select SOC_QCA956X
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_M25P80
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
-index 8408894669dc5f14f05701359073ef233a1b89f0..29c9c65bc122c0d02839adf1abb61dcda0795fb6 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
-@@ -111,6 +111,7 @@ obj-$(CONFIG_ATH79_MACH_ESR1750)		+= mach-esr1750.o
- obj-$(CONFIG_ATH79_MACH_ESR900)			+= mach-esr900.o
- obj-$(CONFIG_ATH79_MACH_EW_DORIN)		+= mach-ew-dorin.o
- obj-$(CONFIG_ATH79_MACH_F9K1115V2)		+= mach-f9k1115v2.o
-+obj-$(CONFIG_ATH79_MACH_FRITZ4020)		+= mach-fritz4020.o
- obj-$(CONFIG_ATH79_MACH_GL_AR150)		+= mach-gl-ar150.o
- obj-$(CONFIG_ATH79_MACH_GL_AR300)		+= mach-gl-ar300.o
- obj-$(CONFIG_ATH79_MACH_GL_AR300M)		+= mach-gl-ar300m.o
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
-index 427de6a50d0fcbc9dae11f8e6921194c0a5b09ed..5f971ea32d35035617229076b7a7fc30ed4d2dcc 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
-@@ -1224,6 +1224,15 @@ void __init ath79_parse_ascii_mac(char *mac_str, u8 *mac)
- 	}
- }
- 
-+void __init ath79_extract_mac_reverse(u8 *ptr, u8 *out)
-+{
-+	int i;
-+
-+	for (i = 0; i < ETH_ALEN; i++) {
-+		out[i] = ptr[ETH_ALEN-i-1];
-+	}
-+}
-+
- static void __init ath79_set_mac_base_ascii(char *str)
- {
- 	u8 mac[ETH_ALEN];
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
-index fb9e4f63c66ef9008e423007ecff02c93c321fb8..4d78260fbe35db20f8dc6dd245abcd0cbb275477 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
-@@ -18,6 +18,7 @@ struct platform_device;
- 
- extern unsigned char ath79_mac_base[] __initdata;
- void ath79_parse_ascii_mac(char *mac_str, u8 *mac);
-+void ath79_extract_mac_reverse(u8 *ptr, u8 *out);
- void ath79_init_mac(unsigned char *dst, const unsigned char *src,
- 		    int offset);
- void ath79_init_local_mac(unsigned char *dst, const unsigned char *src);
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c
-new file mode 100644
-index 0000000000000000000000000000000000000000..ed7f9a8b3ead80dbbe7f8d27c7dd5ecf0543d733
---- /dev/null
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c
-@@ -0,0 +1,242 @@
-+/*
-+ *  AVM FRITZ!Box 4020 board support
-+ *
-+ *  Copyright (C) 2018 David Bauer <mail@david-bauer.net>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/ath9k_platform.h>
-+#include <linux/etherdevice.h>
-+#include <linux/gpio.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/platform_data/mdio-gpio.h>
-+#include <linux/spi/spi_gpio.h>
-+#include <linux/spi/74x164.h>
-+
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "dev-eth.h"
-+#include "dev-gpio-buttons.h"
-+#include "dev-leds-gpio.h"
-+#include "dev-m25p80.h"
-+#include "dev-spi.h"
-+#include "dev-usb.h"
-+#include "dev-wmac.h"
-+#include "machtypes.h"
-+
-+
-+#define FRITZ4020_GPIO_SHIFT_SER			19   /* DS,   Data Serial Input */
-+#define FRITZ4020_GPIO_SHIFT_SRCLK			20 /* SHCP, Shift Reg Clock Input */
-+
-+#define FRITZ4020_SSR_BIT_0				0
-+#define FRITZ4020_SSR_BIT_1				1
-+#define FRITZ4020_SSR_BIT_2				2
-+#define FRITZ4020_SSR_BIT_3				3
-+#define FRITZ4020_SSR_BIT_4				4
-+#define FRITZ4020_SSR_BIT_5				5
-+#define FRITZ4020_SSR_BIT_6				6
-+#define FRITZ4020_SSR_BIT_7				7
-+
-+#define FRITZ4020_74HC_GPIO_BASE			32
-+#define FRITZ4020_74HC_GPIO_LED_LAN			(FRITZ4020_74HC_GPIO_BASE + 0)
-+#define FRITZ4020_74HC_GPIO_LED_INFO_RED		(FRITZ4020_74HC_GPIO_BASE + 1)
-+#define FRITZ4020_74HC_GPIO_LED_POWER			(FRITZ4020_74HC_GPIO_BASE + 2)
-+#define FRITZ4020_74HC_GPIO_LED_WLAN			(FRITZ4020_74HC_GPIO_BASE + 3)
-+#define FRITZ4020_74HC_GPIO_LED_WAN			(FRITZ4020_74HC_GPIO_BASE + 4)
-+#define FRITZ4020_74HC_GPIO_USB_RST			(FRITZ4020_74HC_GPIO_BASE + 5)
-+#define FRITZ4020_74HC_GPIO_LED_INFO			(FRITZ4020_74HC_GPIO_BASE + 6)
-+
-+
-+#define FRITZ4020_GPIO_BTN_WPS				2
-+#define FRITZ4020_GPIO_BTN_WLAN				21
-+#define FRITZ4020_KEYS_POLL_INTERVAL			20 /* msecs */
-+#define FRITZ4020_KEYS_DEBOUNCE_INTERVAL		(3 * FRITZ4020_KEYS_POLL_INTERVAL)
-+
-+#define FRTIZ4020_OFFSET_URLADER_WIFI_MAC_REVERSE	0x1979
-+
-+
-+static struct spi_gpio_platform_data fritz4020_spi_data = {
-+	.sck		= FRITZ4020_GPIO_SHIFT_SRCLK,
-+	.miso		= SPI_GPIO_NO_MISO,
-+	.mosi		= FRITZ4020_GPIO_SHIFT_SER,
-+	.num_chipselect	= 1,
-+};
-+
-+static u8 fritz4020_ssr_initdata[] = {
-+	BIT(FRITZ4020_SSR_BIT_7) |
-+	BIT(FRITZ4020_SSR_BIT_6) |
-+	BIT(FRITZ4020_SSR_BIT_5) |
-+	BIT(FRITZ4020_SSR_BIT_4) |
-+	BIT(FRITZ4020_SSR_BIT_3) |
-+	BIT(FRITZ4020_SSR_BIT_2) |
-+	BIT(FRITZ4020_SSR_BIT_1)
-+};
-+
-+static struct gen_74x164_chip_platform_data fritz4020_ssr_data = {
-+	.base = FRITZ4020_74HC_GPIO_BASE,
-+	.num_registers = ARRAY_SIZE(fritz4020_ssr_initdata),
-+	.init_data = fritz4020_ssr_initdata,
-+};
-+
-+static struct platform_device fritz4020_spi_device = {
-+	.name		= "spi_gpio",
-+	.id		= 1,
-+	.dev = {
-+		.platform_data = &fritz4020_spi_data,
-+	},
-+};
-+
-+static struct spi_board_info fritz4020_spi_info[] = {
-+	{
-+		.bus_num		= 1,
-+		.chip_select		= 0,
-+		.max_speed_hz		= 10000000,
-+		.modalias		= "74x164",
-+		.platform_data		= &fritz4020_ssr_data,
-+		.controller_data	= (void *) 0x0,
-+	},
-+};
-+
-+static struct mtd_partition fritz4020_flash_partitions[] = {
-+	{
-+		.name		= "urlader",
-+		.offset		= 0,
-+		.size		= 0x0020000,
-+		.mask_flags	= MTD_WRITEABLE,
-+	}, {
-+		.name		= "firmware",
-+		.offset		= 0x0020000,
-+		.size		= 0x0EE0000,
-+	}, {
-+		.name		= "tffs (1)",
-+		.offset		= 0x0f00000,
-+		.size		= 0x0080000,
-+		.mask_flags	= MTD_WRITEABLE,
-+	}, {
-+		.name		= "tffs (2)",
-+		.offset		= 0x0f80000,
-+		.size		= 0x0080000,
-+		.mask_flags	= MTD_WRITEABLE,
-+	}
-+};
-+
-+static struct flash_platform_data fritz4020_flash_data = {
-+	.parts		= fritz4020_flash_partitions,
-+	.nr_parts	= ARRAY_SIZE(fritz4020_flash_partitions),
-+};
-+
-+static struct gpio_led fritz4020_leds_gpio[] __initdata = {
-+	{
-+		.name		= "fritz4020:green:lan",
-+		.gpio		= FRITZ4020_74HC_GPIO_LED_LAN,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "fritz4020:green:info",
-+		.gpio		= FRITZ4020_74HC_GPIO_LED_INFO,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "fritz4020:red:info",
-+		.gpio		= FRITZ4020_74HC_GPIO_LED_INFO_RED,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "fritz4020:green:power",
-+		.gpio		= FRITZ4020_74HC_GPIO_LED_POWER,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "fritz4020:green:wlan",
-+		.gpio		= FRITZ4020_74HC_GPIO_LED_WLAN,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "fritz4020:green:wan",
-+		.gpio		= FRITZ4020_74HC_GPIO_LED_WAN,
-+		.active_low	= 1,
-+	},
-+};
-+
-+static struct gpio_keys_button fritz4020_gpio_keys[] __initdata = {
-+	{
-+		.desc			= "RFKILL button",
-+		.type			= EV_KEY,
-+		.code			= KEY_RFKILL,
-+		.debounce_interval	= FRITZ4020_KEYS_DEBOUNCE_INTERVAL,
-+		.gpio			= FRITZ4020_GPIO_BTN_WLAN,
-+		.active_low		= 0,
-+	},
-+	{
-+		.desc			= "WPS button",
-+		.type			= EV_KEY,
-+		.code			= KEY_WPS_BUTTON,
-+		.debounce_interval	= FRITZ4020_KEYS_DEBOUNCE_INTERVAL,
-+		.gpio			= FRITZ4020_GPIO_BTN_WPS,
-+		.active_low		= 0,
-+	},
-+};
-+
-+static void __init fritz4020_setup(void) {
-+	u8 *urlader = (u8 *) KSEG1ADDR(0x1f000000);
-+	u8 wifi_mac[ETH_ALEN];
-+
-+	ath79_register_m25p80(&fritz4020_flash_data);
-+
-+	/* Initialize ethernet */
-+	ath79_extract_mac_reverse(urlader + FRTIZ4020_OFFSET_URLADER_WIFI_MAC_REVERSE, wifi_mac);
-+	ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
-+				    QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
-+
-+	ath79_register_mdio(0, 0x0);
-+	ath79_register_mdio(1, 0x0);
-+	ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, -1);
-+	ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, -2);
-+
-+	/* WAN port */
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-+	ath79_eth0_data.speed = SPEED_100;
-+	ath79_eth0_data.duplex = DUPLEX_FULL;
-+	ath79_eth0_data.phy_mask = BIT(0);
-+	ath79_register_eth(0);
-+
-+	/* LAN ports */
-+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-+	ath79_eth1_data.speed = SPEED_1000;
-+	ath79_eth1_data.duplex = DUPLEX_FULL;
-+	ath79_switch_data.phy_poll_mask |= BIT(0);
-+	ath79_switch_data.phy4_mii_en = 1;
-+	ath79_register_eth(1);
-+
-+	/* Initialize 2.4GHz WiFi */
-+	ath79_register_wmac_simple();
-+
-+	/* Activate USB Power */
-+	gpio_request_one(FRITZ4020_74HC_GPIO_USB_RST,
-+			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
-+			 "USB power");
-+
-+	/* Initialize USB port */
-+	ath79_register_usb();
-+
-+	/* Register LED shift-register */
-+	spi_register_board_info(fritz4020_spi_info,
-+				ARRAY_SIZE(fritz4020_spi_info));
-+	platform_device_register(&fritz4020_spi_device);
-+
-+	/* Register GPIO buttons */
-+	ath79_register_gpio_keys_polled(-1, FRITZ4020_KEYS_POLL_INTERVAL,
-+					ARRAY_SIZE(fritz4020_gpio_keys),
-+					fritz4020_gpio_keys);
-+
-+	/* Register LEDs */
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz4020_leds_gpio),
-+				 fritz4020_leds_gpio);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_FRITZ4020, "FRITZ4020",
-+	     "AVM FRITZ!Box 4020", fritz4020_setup);
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-index 72c1e38c74707aba8fbd3aebc36f35becabd4987..07f1877180e27ff189387c5f34a61702d0fa9bd2 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-@@ -102,6 +102,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_EW_DORIN,			/* embedded wireless Dorin Platform */
- 	ATH79_MACH_EW_DORIN_ROUTER,		/* embedded wireless Dorin Router Platform */
- 	ATH79_MACH_F9K1115V2,			/* Belkin AC1750DB */
-+	ATH79_MACH_FRITZ4020,			/* AVM FRITZ!Box 4020 */
- 	ATH79_MACH_GL_AR150,			/* GL-AR150 support */
- 	ATH79_MACH_GL_AR300,			/* GL-AR300 */
- 	ATH79_MACH_GL_AR300M,			/* GL-AR300M */
-diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
-index e11a8992f9c2f950079fddf121eb30c34926e33d..d113c5ad621bb2f15d4cbc4fd50e60904313a7da 100644
---- a/target/linux/ar71xx/image/generic.mk
-+++ b/target/linux/ar71xx/image/generic.mk
-@@ -738,3 +738,22 @@ define Device/bhr-4grv2
-   IMAGE/factory.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg
- endef
- TARGET_DEVICES += bhr-4grv2
-+
-+define Device/AVM
-+  DEVICE_PACKAGES := fritz-tffs -uboot-envtools
-+  KERNEL := kernel-bin | patch-cmdline | lzma | eva-image
-+  KERNEL_INITRAMFS := $$(KERNEL)
-+  IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
-+	append-squashfs-fakeroot-be | pad-to 256 | \
-+	append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-+endef
-+
-+define Device/fritz4020
-+  $(call Device/AVM)
-+  DEVICE_TITLE := AVM FRITZ!Box 4020
-+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
-+  BOARDNAME := FRITZ4020
-+  SUPPORTED_DEVICES := fritz4020
-+  IMAGE_SIZE := 15232k
-+endef
-+TARGET_DEVICES += fritz4020
-diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
-index 23e862762600f0724a37fe1a390d4d09639c472c..e0401102229c00985e8000331dce43375903e1aa 100644
---- a/target/linux/ar71xx/mikrotik/config-default
-+++ b/target/linux/ar71xx/mikrotik/config-default
-@@ -71,6 +71,7 @@
- # CONFIG_ATH79_MACH_ESR900 is not set
- # CONFIG_ATH79_MACH_EW_DORIN is not set
- # CONFIG_ATH79_MACH_F9K1115V2 is not set
-+# CONFIG_ATH79_MACH_FRITZ4020 is not set
- # CONFIG_ATH79_MACH_GL_AR150 is not set
- # CONFIG_ATH79_MACH_GL_AR300 is not set
- # CONFIG_ATH79_MACH_GL_AR300M is not set
-@@ -217,6 +218,7 @@ CONFIG_MTD_NAND_ECC=y
- CONFIG_MTD_NAND_RB4XX=y
- CONFIG_MTD_NAND_RB750=y
- CONFIG_MTD_NAND_RB91X=y
-+# CONFIG_MTD_SPLIT_EVA_FW is not set
- # CONFIG_MTD_REDBOOT_PARTS is not set
- # CONFIG_MTD_TPLINK_PARTS is not set
- CONFIG_MTD_UBI=y
-diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
-index c11ccfe29795d013776870cf21fb6ca8d907af1b..790fa8f9bd42aba8521b960c2a49a742285e6157 100644
---- a/target/linux/ar71xx/nand/config-default
-+++ b/target/linux/ar71xx/nand/config-default
-@@ -29,6 +29,7 @@
- # CONFIG_ATH79_MACH_DIR_869_A1 is not set
- # CONFIG_ATH79_MACH_EAP7660D is not set
- # CONFIG_ATH79_MACH_EW_DORIN is not set
-+# CONFIG_ATH79_MACH_FRITZ4020 is not set
- # CONFIG_ATH79_MACH_HORNET_UB is not set
- # CONFIG_ATH79_MACH_JA76PF is not set
- # CONFIG_ATH79_MACH_JWAP003 is not set
-@@ -104,6 +105,7 @@ CONFIG_MTD_NAND_ECC=y
- CONFIG_MTD_NAND_ECC_BCH=y
- # CONFIG_MTD_REDBOOT_PARTS is not set
- # CONFIG_MTD_SM_COMMON is not set
-+# CONFIG_MTD_SPLIT_EVA_FW is not set
- # CONFIG_MTD_SPLIT_SEAMA_FW is not set
- # CONFIG_MTD_TPLINK_PARTS is not set
- CONFIG_MTD_UBI=y

patches/lede/0085-ar71xx-add-support-for-TP-Link-TL-WR940N-v6.patch

-From: Robert Marko <robimarko@gmail.com>
-Date: Wed, 21 Feb 2018 13:15:17 +0100
-Subject: ar71xx: add support for TP-Link TL-WR940N v6
-
-Add support for TL-WR940N v6 board. It is pretty much the same as v5
-except they only left WAN LED and removed other ones.
-
-Installation: flash factory image through WEB UI or use TFTP.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-
-diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-index e8b13af7c24dea86519c962fa6381fd75971e8b9..62d7f014be28782b9961551f2377a66ccadfb329 100755
---- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
-+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-@@ -676,6 +676,9 @@ tl-wr941nd-v6)
- 	ucidef_set_led_switch "lan4" "LAN4" "tp-link:blue:lan4" "switch0" "0x02"
- 	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
- 	;;
-+tl-wr940n-v6)
-+	ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"
-+	;;
- tl-wr841n-v9|\
- tl-wr841n-v11|\
- tl-wr842n-v3)
-diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
-index 1018ab4449f896d565b57ecbdc73b7e3d7fbe486..ae82cfe008169a8282ac51746cf2299eec8c81d8 100755
---- a/target/linux/ar71xx/base-files/etc/board.d/02_network
-+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
-@@ -298,6 +298,7 @@ ar71xx_setup_interfaces()
- 	tl-wdr6500-v2|\
- 	tl-wr841n-v8|\
- 	tl-wr940n-v4|\
-+	tl-wr940n-v6|\
- 	tl-wr941nd-v5|\
- 	tl-wr941nd-v6|\
- 	wnr1000-v2|\
-diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
-index 382500b75ee6dc1fe1126fb3121f4ae205c901d4..4d792e773c8efe0cb2e5e328d777db853cdd846b 100644
---- a/target/linux/ar71xx/base-files/etc/diag.sh
-+++ b/target/linux/ar71xx/base-files/etc/diag.sh
-@@ -397,6 +397,9 @@ get_status_led() {
- 	tl-wr941nd-v6)
- 		status_led="tp-link:blue:system"
- 		;;
-+	tl-wr940n-v6)
-+		status_led="tp-link:orange:diag"
-+		;;
- 	tl-wr841n-v9)
- 		status_led="tp-link:green:qss"
- 		;;
-diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-index a815ffe07322c20cddaa3c4f97e3bf62a3cf15ec..21b1c44404d383ef99860caf95a8e19b9cbf5087 100755
---- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
-+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-@@ -1082,6 +1082,9 @@ ar71xx_board_detect() {
- 	*TL-WR941ND)
- 		name="tl-wr941nd"
- 		;;
-+	*"TL-WR940N v6")
-+		name="tl-wr940n-v6"
-+		;;
- 	*"TL-WR941N/ND v5")
- 		name="tl-wr941nd-v5"
- 		;;
-diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-index 491b5d5a98b44844f14441d4024f2ad9667186e0..03677ad1240c9a5af341354b95561f9d493a9cd8 100755
---- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-@@ -443,6 +443,7 @@ platform_check_image() {
- 	tl-wr941nd-v5|\
- 	tl-wr941nd-v6|\
- 	tl-wr940n-v4|\
-+	tl-wr940n-v6|\
- 	tl-wr941nd)
- 		local magic_ver="0100"
- 
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr940n-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr940n-v4.c
-index d693b947c843d2a74cd252503fa8bf68b20da4ab..b530622d9f00b8ce3b906ad5fe62de019d82763a 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr940n-v4.c
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr940n-v4.c
-@@ -1,5 +1,5 @@
- /*
-- *  TP-LINK TL-WR940N v4 board support
-+ *  TP-LINK TL-WR940N v4 and v6 board support
-  *
-  *  Copyright (C) 2016 David Lutz <kpanic@ff3l.net>
-  *
-@@ -32,12 +32,15 @@
- #define TL_WR940N_V4_GPIO_LED_LAN1		8
- #define TL_WR940N_V4_GPIO_LED_WLAN		7
- #define TL_WR940N_V4_GPIO_LED_SYSTEM		5
-+/* WR940N v6 specific GPIO*/
-+#define TL_WR940N_V6_GPIO_LED_DIAG_ORANGE	15
-+#define TL_WR940N_V6_GPIO_LED_WAN_BLUE		14
- 
- #define TL_WR940N_V4_GPIO_BTN_RESET		1
- #define TL_WR940N_V4_GPIO_BTN_RFKILL		2
- 
--#define TL_WR940N_V4_KEYS_POLL_INTERVAL	20
--#define TL_WR940N_V4_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WR940N_V4_KEYS_POLL_INTERVAL)
-+#define TL_WR940N_KEYS_POLL_INTERVAL		20
-+#define TL_WR940N_KEYS_DEBOUNCE_INTERVAL	(3 * TL_WR940N_KEYS_POLL_INTERVAL)
- 
- 
- static struct gpio_led tl_wr940n_v4_leds_gpio[] __initdata = {
-@@ -93,43 +96,49 @@ static struct gpio_keys_button tl_wr940n_v4_gpio_keys[] __initdata = {
- 		.desc		= "Reset button",
- 		.type		= EV_KEY,
- 		.code		= KEY_RESTART,
--		.debounce_interval = TL_WR940N_V4_KEYS_DEBOUNCE_INTERVAL,
-+		.debounce_interval = TL_WR940N_KEYS_DEBOUNCE_INTERVAL,
- 		.gpio		= TL_WR940N_V4_GPIO_BTN_RESET,
- 		.active_low	= 1,
- 	}, {
- 		.desc		= "RFKILL button",
- 		.type		= EV_KEY,
- 		.code		= KEY_RFKILL,
--		.debounce_interval = TL_WR940N_V4_KEYS_DEBOUNCE_INTERVAL,
-+		.debounce_interval = TL_WR940N_KEYS_DEBOUNCE_INTERVAL,
- 		.gpio		= TL_WR940N_V4_GPIO_BTN_RFKILL,
- 		.active_low	= 1,
- 	}
- };
- 
-+static struct gpio_led tl_wr940n_v6_leds_gpio[] __initdata = {
-+	{
-+		.name		= "tp-link:blue:wan",
-+		.gpio		= TL_WR940N_V6_GPIO_LED_WAN_BLUE,
-+		.active_low	= 1,
-+	},
-+	{
-+		.name		= "tp-link:orange:diag",
-+		.gpio		= TL_WR940N_V6_GPIO_LED_DIAG_ORANGE,
-+		.active_low	= 0,
-+	},
-+};
-+
- 
--static const char *tl_wr940n_v4_part_probes[] = {
-+static const char *tl_wr940n_part_probes[] = {
- 	"tp-link",
- 	NULL,
- };
- 
--static struct flash_platform_data tl_wr940n_v4_flash_data = {
--	.part_probes	= tl_wr940n_v4_part_probes,
-+static struct flash_platform_data tl_wr940n_flash_data = {
-+	.part_probes	= tl_wr940n_part_probes,
- };
- 
- 
--static void __init tl_wr940n_v4_setup(void)
-+static void __init tl_wr940n_setup(void)
- {
- 	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- 	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- 
--	ath79_register_m25p80(&tl_wr940n_v4_flash_data);
--
--	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr940n_v4_leds_gpio),
--				 tl_wr940n_v4_leds_gpio);
--
--	ath79_register_gpio_keys_polled(-1, TL_WR940N_V4_KEYS_POLL_INTERVAL,
--					ARRAY_SIZE(tl_wr940n_v4_gpio_keys),
--					tl_wr940n_v4_gpio_keys);
-+	ath79_register_m25p80(&tl_wr940n_flash_data);
- 
- 	ath79_register_mdio(0, 0x0);
- 
-@@ -145,5 +154,31 @@ static void __init tl_wr940n_v4_setup(void)
- 
- }
- 
-+static void __init tl_wr940n_v4_setup(void)
-+{
-+	tl_wr940n_setup();
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr940n_v4_leds_gpio),
-+				 tl_wr940n_v4_leds_gpio);
-+
-+	ath79_register_gpio_keys_polled(-1, TL_WR940N_KEYS_POLL_INTERVAL,
-+					ARRAY_SIZE(tl_wr940n_v4_gpio_keys),
-+					tl_wr940n_v4_gpio_keys);
-+}
-+
-+static void __init tl_wr940n_v6_setup(void)
-+{
-+	tl_wr940n_setup();
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr940n_v6_leds_gpio),
-+				 tl_wr940n_v6_leds_gpio);
-+
-+	ath79_register_gpio_keys_polled(-1, TL_WR940N_KEYS_POLL_INTERVAL,
-+					ARRAY_SIZE(tl_wr940n_v4_gpio_keys),
-+					tl_wr940n_v4_gpio_keys);
-+}
-+
- MIPS_MACHINE(ATH79_MACH_TL_WR940N_V4, "TL-WR940N-v4", "TP-LINK TL-WR940N v4",
- 	     tl_wr940n_v4_setup);
-+MIPS_MACHINE(ATH79_MACH_TL_WR940N_V6, "TL-WR940N-v6", "TP-LINK TL-WR940N v6",
-+	     tl_wr940n_v6_setup);
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-index 07f1877180e27ff189387c5f34a61702d0fa9bd2..89ddbbc976c9393608a80b9ce56e02a4d403ea2a 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-@@ -242,6 +242,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_TL_WR941ND_V5,		/* TP-LINK TL-WR941ND v5 */
- 	ATH79_MACH_TL_WR941ND_V6,		/* TP-LINK TL-WR941ND v6 */
- 	ATH79_MACH_TL_WR940N_V4,		/* TP-LINK TL-WR940N v4 */
-+	ATH79_MACH_TL_WR940N_V6,		/* TP-LINK TL-WR940N v6 */
- 	ATH79_MACH_TUBE2H,			/* Alfa Network Tube2H */
- 	ATH79_MACH_UBNT_AIRGW,			/* Ubiquiti AirGateway */
- 	ATH79_MACH_UBNT_AIRGWP,			/* Ubiquiti AirGateway Pro */
-diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
-index 60dfe0e3edafcadad4ddc08be7645b49f269907c..1e40d943ac2aa43aea670fd86268708aea39a46c 100644
---- a/target/linux/ar71xx/image/tp-link.mk
-+++ b/target/linux/ar71xx/image/tp-link.mk
-@@ -857,6 +857,14 @@ define Device/tl-wr940n-v4
-     IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
- endef
- 
-+define Device/tl-wr940n-v6
-+  $(Device/tl-wr940n-v4)
-+  DEVICE_TITLE := TP-LINK TL-WR940N v6
-+  BOARDNAME := TL-WR940N-v6
-+  TPLINK_HWID := 0x09400006
-+endef
-+TARGET_DEVICES += tl-wr940n-v6
-+
- # Chinese version (unlike European) is similar to the TL-WDR3500
- define Device/tl-wr941nd-v6-cn
-     $(Device/tplink-4mlzma)

patches/lede/0086-ar71xx-set-status-led-for-the-gl-boards.patch

-From: Wojciech Jowsa <w.jowsa@radytek.com>
-Date: Wed, 15 Feb 2017 12:38:07 +0100
-Subject: ar71xx: set status led for the gl-* boards
-
-Signed-off-by: Wojciech Jowsa <w.jowsa@radytek.com>
-
-diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-index 62d7f014be28782b9961551f2377a66ccadfb329..f4d83cee519406a188cc9dde355f509dd644625a 100755
---- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
-+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-@@ -311,19 +311,18 @@ fritz4020)
- 	ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
- 	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- 	;;
--gl-ar150|\
--gl-ar300|\
--gl-ar300m|\
-+gl-ar300m)
-+	ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
-+	;;
- gl-mifi)
-+	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
-+	ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
-+	ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
-+	ucidef_set_led_netdev "3gnet" "3GNET" "$board:green:net" "3g-wan"
-+	;;
-+gl-ar150|\
-+gl-ar300)
- 	ucidef_set_led_wlan "wlan" "WLAN" "$board:wlan" "phy0tpt"
--
--	case "$board" in
--	gl-mifi)
--		ucidef_set_led_netdev "wan" "WAN" "$board:wan" "eth0"
--		ucidef_set_led_netdev "lan" "LAN" "$board:lan" "eth1"
--		ucidef_set_led_netdev "3gnet" "3GNET" "$board:net" "3g-wan"
--		;;
--	esac
- 	;;
- gl-domino|\
- wrt160nl)
-diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
-index 4d792e773c8efe0cb2e5e328d777db853cdd846b..336d078f72a06073e3465c36ca98035c7d70282f 100644
---- a/target/linux/ar71xx/base-files/etc/diag.sh
-+++ b/target/linux/ar71xx/base-files/etc/diag.sh
-@@ -64,7 +64,9 @@ get_status_led() {
- 	ap90q|\
- 	cpe830|\
- 	cpe870|\
--	gl-inet)
-+	gl-inet|\
-+	gl-mifi|\
-+	gl-ar300m)
- 		status_led="$board:green:lan"
- 		;;
- 	ap96)
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
-index 62906a1922f890eb36ad212e9542dc52dc56006c..ca44b364c51559350fedc5551a023b2772bb69a1 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
-@@ -6,9 +6,9 @@
-  *  Copyright (C) 2013 alzhao <alzhao@gmail.com>
-  *  Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
-  *
-- *  This program is free software; you can redistribute it and/or modify it
-- *  under the terms of the GNU General Public License version 2 as published
-- *  by the Free Software Foundation.
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-  */
- 
- #include <linux/gpio.h>
-@@ -37,130 +37,130 @@
- #define GL_AR300M_GPIO_BTN_LEFT		0
- #define GL_AR300M_GPIO_BTN_RIGHT	1
- 
--#define GL_AR300M_KEYS_POLL_INTERVAL        20  /* msecs */
--#define GL_AR300M_KEYS_DEBOUNCE_INTERVAL    (3 * GL_AR300M_KEYS_POLL_INTERVAL)
-+#define GL_AR300M_KEYS_POLL_INTERVAL		20	/* msecs */
-+#define GL_AR300M_KEYS_DEBOUNCE_INTERVAL	(3 * GL_AR300M_KEYS_POLL_INTERVAL)
- 
--#define GL_AR300M_MAC0_OFFSET   0
--#define GL_AR300M_MAC1_OFFSET   6
--#define GL_AR300M_WMAC_CALDATA_OFFSET   0x1000
--#define GL_AR300M_PCIE_CALDATA_OFFSET   0x5000
-+#define GL_AR300M_MAC0_OFFSET	0
-+#define GL_AR300M_MAC1_OFFSET	6
-+#define GL_AR300M_WMAC_CALDATA_OFFSET	0x1000
-+#define GL_AR300M_PCIE_CALDATA_OFFSET	0x5000
- 
- static struct gpio_led gl_ar300m_leds_gpio[] __initdata = {
--    {
--        .name = "gl-ar300m:usb",
--        .gpio = GL_AR300M_GPIO_LED_USB,
--        .active_low = 0,
--        .default_state = 1,
--    },
--    {
--        .name = "gl-ar300m:wlan",
--        .gpio = GL_AR300M_GPIO_LED_WLAN,
--        .active_low = 1,
--    },
--    {
--        .name = "gl-ar300m:lan",
--        .gpio = GL_AR300M_GPIO_LED_LAN,
--        .active_low = 1,
--    },
--    {
--        .name = "gl-ar300m:system",
--        .gpio = GL_AR300M_GPIO_LED_SYSTEM,
--        .active_low = 1,
--        .default_state = 1,
--    },
-+	{
-+		.name = "gl-ar300m:green:usb",
-+		.gpio = GL_AR300M_GPIO_LED_USB,
-+		.active_low = 0,
-+		.default_state = 1,
-+	},
-+	{
-+		.name = "gl-ar300m:green:wlan",
-+		.gpio = GL_AR300M_GPIO_LED_WLAN,
-+		.active_low = 1,
-+	},
-+	{
-+		.name = "gl-ar300m::green:lan",
-+		.gpio = GL_AR300M_GPIO_LED_LAN,
-+		.active_low = 1,
-+	},
-+	{
-+		.name = "gl-ar300m:green:system",
-+		.gpio = GL_AR300M_GPIO_LED_SYSTEM,
-+		.active_low = 1,
-+		.default_state = 1,
-+	},
- };
- 
- static struct gpio_keys_button gl_ar300m_gpio_keys[] __initdata = {
--    {
--        .desc = "reset",
--        .type = EV_KEY,
--        .code = KEY_RESTART,
--        .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
--        .gpio = GL_AR300M_GPIO_BTN_RESET,
--        .active_low = 1,
--    },
--    {
--        .desc = "button right",
--        .type = EV_KEY,
--        .code = BTN_0,
--        .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
--        .gpio = GL_AR300M_GPIO_BTN_LEFT,
--        .active_low = 0,
--    },
--    {
--        .desc = "button left",
--        .type = EV_KEY,
--        .code = BTN_1,
--        .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
--        .gpio = GL_AR300M_GPIO_BTN_RIGHT,
--        .active_low = 0,
--    },
-+	{
-+		.desc = "reset",
-+		.type = EV_KEY,
-+		.code = KEY_RESTART,
-+		.debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
-+		.gpio = GL_AR300M_GPIO_BTN_RESET,
-+		.active_low = 1,
-+	},
-+	{
-+		.desc = "button right",
-+		.type = EV_KEY,
-+		.code = BTN_0,
-+		.debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
-+		.gpio = GL_AR300M_GPIO_BTN_LEFT,
-+		.active_low = 0,
-+	},
-+	{
-+		.desc = "button left",
-+		.type = EV_KEY,
-+		.code = BTN_1,
-+		.debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
-+		.gpio = GL_AR300M_GPIO_BTN_RIGHT,
-+		.active_low = 0,
-+	},
- };
- 
- static struct spi_board_info gl_ar300m_spi_info[] = {
--    {
--        .bus_num    = 0,
--        .chip_select    = 0,
--        .max_speed_hz   = 25000000,
--        .modalias   = "m25p80",
--        .platform_data  = NULL,
--    },
--    {
--        .bus_num    = 0,
--        .chip_select    = 1,
--        .max_speed_hz   = 25000000,
--        .modalias   = "ath79-spinand",
--        .platform_data  = NULL,
--    }
-+	{
-+		.bus_num	= 0,
-+		.chip_select	= 0,
-+		.max_speed_hz	= 25000000,
-+		.modalias	= "m25p80",
-+		.platform_data	= NULL,
-+	},
-+	{
-+		.bus_num	= 0,
-+		.chip_select	= 1,
-+		.max_speed_hz	= 25000000,
-+		.modalias	= "ath79-spinand",
-+		.platform_data	= NULL,
-+	}
- };
- 
- static struct ath79_spi_platform_data gl_ar300m_spi_data = {
--    .bus_num        = 0,
--    .num_chipselect     = 2,
-+	.bus_num		= 0,
-+	.num_chipselect		= 2,
- };
- 
- static void __init gl_ar300m_setup(void)
- {
--    u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
--    u8 tmpmac[ETH_ALEN];
--
--    ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
--    ath79_register_spi(&gl_ar300m_spi_data, gl_ar300m_spi_info, 2);
--
--    /* register gpio LEDs and keys */
--    ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300m_leds_gpio),
--                 gl_ar300m_leds_gpio);
--    ath79_register_gpio_keys_polled(-1, GL_AR300M_KEYS_POLL_INTERVAL,
--                    ARRAY_SIZE(gl_ar300m_gpio_keys),
--                    gl_ar300m_gpio_keys);
--
--    ath79_register_mdio(0, 0x0);
--
--    /* WAN */
--    ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR300M_MAC0_OFFSET, 0);
--    ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
--    ath79_eth0_data.speed = SPEED_100;
--    ath79_eth0_data.duplex = DUPLEX_FULL;
--    ath79_eth0_data.phy_mask = BIT(4);
--    ath79_register_eth(0);
--
--    /* LAN */
--    ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR300M_MAC1_OFFSET, 0);
--    ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
--    ath79_eth1_data.speed = SPEED_1000;
--    ath79_eth1_data.duplex = DUPLEX_FULL;
--    ath79_switch_data.phy_poll_mask |= BIT(4);
--    ath79_switch_data.phy4_mii_en = 1;
--    ath79_register_eth(1);
--
--    ath79_init_mac(tmpmac, art + GL_AR300M_WMAC_CALDATA_OFFSET + 2, 0);
--    ath79_register_wmac(art + GL_AR300M_WMAC_CALDATA_OFFSET, tmpmac);
--
--    /* enable usb */
--    ath79_register_usb();
--    /* enable pci */
--    ath79_register_pci();
-+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+	u8 tmpmac[ETH_ALEN];
-+
-+	ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-+	ath79_register_spi(&gl_ar300m_spi_data, gl_ar300m_spi_info, 2);
-+
-+	/* register gpio LEDs and keys */
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300m_leds_gpio),
-+				 gl_ar300m_leds_gpio);
-+	ath79_register_gpio_keys_polled(-1, GL_AR300M_KEYS_POLL_INTERVAL,
-+					ARRAY_SIZE(gl_ar300m_gpio_keys),
-+					gl_ar300m_gpio_keys);
-+
-+	ath79_register_mdio(0, 0x0);
-+
-+	/* WAN */
-+	ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR300M_MAC0_OFFSET, 0);
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-+	ath79_eth0_data.speed = SPEED_100;
-+	ath79_eth0_data.duplex = DUPLEX_FULL;
-+	ath79_eth0_data.phy_mask = BIT(4);
-+	ath79_register_eth(0);
-+
-+	/* LAN */
-+	ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR300M_MAC1_OFFSET, 0);
-+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-+	ath79_eth1_data.speed = SPEED_1000;
-+	ath79_eth1_data.duplex = DUPLEX_FULL;
-+	ath79_switch_data.phy_poll_mask |= BIT(4);
-+	ath79_switch_data.phy4_mii_en = 1;
-+	ath79_register_eth(1);
-+
-+	ath79_init_mac(tmpmac, art + GL_AR300M_WMAC_CALDATA_OFFSET + 2, 0);
-+	ath79_register_wmac(art + GL_AR300M_WMAC_CALDATA_OFFSET, tmpmac);
-+
-+	/* enable usb */
-+	ath79_register_usb();
-+	/* enable pci */
-+	ath79_register_pci();
- }
- 
- MIPS_MACHINE(ATH79_MACH_GL_AR300M, "GL-AR300M", "GL-AR300M",
--         gl_ar300m_setup);
-+		 gl_ar300m_setup);
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
-index 42f4415d7fe0252aadf39e2ca50f96566c023728..412c562fa042e7abb0ccb35208bb55821efc8660 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
-@@ -41,27 +41,27 @@
- 
- static struct gpio_led gl_mifi_leds_gpio[] __initdata = {
- 	{
--		.name = "gl-mifi:wan",
-+		.name = "gl-mifi:greeen:wan",
- 		.gpio = GL_MIFI_GPIO_LED_WAN,
- 		.active_low = 0,
- 	},
- 	{
--		.name = "gl-mifi:lan",
-+		.name = "gl-mifi:green:lan",
- 		.gpio = GL_MIFI_GPIO_LED_LAN,
- 		.active_low = 0,
- 	},
- 	{
--		.name = "gl-mifi:wlan",
-+		.name = "gl-mifi:green:wlan",
- 		.gpio = GL_MIFI_GPIO_LED_WLAN,
- 		.active_low = 0,
- 	},
- 	{
--		.name = "gl-mifi:net",
-+		.name = "gl-mifi:green:net",
- 		.gpio = GL_MIFI_GPIO_LED_NET,
- 		.active_low = 0,
- 	},
- 	{
--		.name = "gl-mifi:3gcontrol",
-+		.name = "gl-mifi:green:3gcontrol",
- 		.gpio = GL_MIFI_GPIO_LED_3GCONTROL,
- 		.active_low = 0,
- 	}

patches/lede/0087-ar71xx-add-support-for-GL.iNet-GL-AR750.patch

-From: Piotr Dymacz <pepe2k@gmail.com>
-Date: Tue, 17 Oct 2017 23:30:01 +0200
-Subject: ar71xx: add support for GL.iNet GL-AR750
-
-GL.iNet GL-AR750 is a small size, dual-band (AC750) router, based on
-Qualcomm/Atheros QCA9531 v2 + QCA9887. FCC ID: 2AFIW-AR750.
-
-Specification:
-
-- 650/597/216 MHz (CPU/DDR/AHB)
-- 128 MB of RAM (DDR2)
-- 16 MB of FLASH (SPI NOR)
-- 3x 10/100 Mbps Ethernet
-- 2T2R 2.4 GHz (QCA9531)
-- 1T1R 5 GHz (QCA9887)
-- 1x USB 2.0 (power controlled by GPIO)
-- 1x microSD (GL857L)
-- 3x LED (all driven by GPIO)
-- 1x button (reset)
-- 1x 2-pos switch
-- header for optional PoE module
-- 1x micro USB for main power input
-- UART + I2C header on PCB
-
-Flash instruction:
-
-Vendor firmware is based on OpenWrt/LEDE. GUI or sysupgrade can be used
-to flash OpenWrt/LEDE firmware.
-
-Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
-
-diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-index f4d83cee519406a188cc9dde355f509dd644625a..f94cc3c85b798458cc97c06bb0d44bdc426d057d 100755
---- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
-+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-@@ -314,6 +314,10 @@ fritz4020)
- gl-ar300m)
- 	ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
- 	;;
-+gl-ar750)
-+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt"
-+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:white:wlan5g" "phy0tpt"
-+	;;
- gl-mifi)
- 	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- 	ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
-diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
-index ae82cfe008169a8282ac51746cf2299eec8c81d8..c8990c60f504286d0fd28c7b17f54c9c3b5a891e 100755
---- a/target/linux/ar71xx/base-files/etc/board.d/02_network
-+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
-@@ -369,6 +369,7 @@ ar71xx_setup_interfaces()
- 	onion-omega)
- 		ucidef_set_interface_lan "wlan0"
- 		;;
-+	gl-ar750|\
- 	rb-435g)
- 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
- 		ucidef_add_switch "switch0" \
-diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
-index 336d078f72a06073e3465c36ca98035c7d70282f..01d3b787bedcab82a5797c9a4801e8139887cc2c 100644
---- a/target/linux/ar71xx/base-files/etc/diag.sh
-+++ b/target/linux/ar71xx/base-files/etc/diag.sh
-@@ -249,6 +249,7 @@ get_status_led() {
- 	nbg460n_550n_550nh)
- 		status_led="nbg460n:green:power"
- 		;;
-+	gl-ar750|\
- 	nbg6716)
- 		status_led="$board:white:power"
- 		;;
-@@ -489,7 +490,8 @@ set_state() {
- 	done)
- 		status_led_on
- 		case $(ar71xx_board_name) in
--		gl-ar300m)
-+		gl-ar300m|\
-+		gl-ar750)
- 			fw_printenv lc >/dev/null 2>&1 && fw_setenv "bootcount" 0
- 			;;
- 		qihoo-c301)
-diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
-index 91bdf0d3c591516f58030b165052b3dd2751314f..1626622a8e46484bbf2719f19843e61d9cc92506 100644
---- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
-+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
-@@ -103,6 +103,7 @@ case "$FIRMWARE" in
- 		ath10kcal_extract "art" 20480 2116
- 		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
- 		;;
-+	gl-ar750|\
- 	tl-wpa8630)
- 		ath10kcal_extract "art" 20480 2116
- 		ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
-diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-index 21b1c44404d383ef99860caf95a8e19b9cbf5087..35b742a5f1fee0bc24ab2d88e32f118c1df4e2b3 100755
---- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
-+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-@@ -650,6 +650,9 @@ ar71xx_board_detect() {
- 	*"GL-AR300M")
- 		name="gl-ar300m"
- 		;;
-+	*"GL-AR750")
-+		name="gl-ar750"
-+		;;
- 	*"GL-MIFI")
- 		name="gl-mifi"
- 		;;
-diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
-index d677599d8c6380d9920e95abc9fb4b92cc0cec29..ba6e08b00d979bc73f7199756e22ca3941fad97d 100644
---- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
-+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
-@@ -17,6 +17,7 @@ set_preinit_iface() {
- 	archer-c7 |\
- 	bhr-4grv2 |\
- 	dir-505-a1 |\
-+	gl-ar750|\
- 	gl-inet |\
- 	jwap003 |\
- 	pb42 |\
-diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-index 03677ad1240c9a5af341354b95561f9d493a9cd8..236520b27c4d6d0b1b7e483d1100fb5ab156d475 100755
---- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-@@ -253,6 +253,7 @@ platform_check_image() {
- 	gl-ar150|\
- 	gl-ar300m|\
- 	gl-ar300|\
-+	gl-ar750|\
- 	gl-domino|\
- 	gl-mifi|\
- 	hiwifi-hc6361|\
-diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
-index 45bf500643837a7270b45e32b22225c06c5fb841..d96642b97c36187febb1f3843e7dd9acfab0e40d 100644
---- a/target/linux/ar71xx/config-4.4
-+++ b/target/linux/ar71xx/config-4.4
-@@ -110,6 +110,7 @@ CONFIG_ATH79_MACH_FRITZ4020=y
- CONFIG_ATH79_MACH_GL_AR150=y
- CONFIG_ATH79_MACH_GL_AR300=y
- CONFIG_ATH79_MACH_GL_AR300M=y
-+CONFIG_ATH79_MACH_GL_AR750=y
- CONFIG_ATH79_MACH_GL_DOMINO=y
- CONFIG_ATH79_MACH_GL_INET=y
- CONFIG_ATH79_MACH_GL_MIFI=y
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
-index 46366e0d922808e5e14fed0f2b5409cda11afd26..2449a8d6bce17f0a703d8fc4f82dd38e1f861ae3 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
-@@ -691,6 +691,17 @@ config ATH79_MACH_GL_AR300M
- 	select ATH79_DEV_USB
- 	select ATH79_DEV_WMAC
- 
-+config ATH79_MACH_GL_AR750
-+	bool "GL.iNet GL-AR750 support"
-+	select SOC_QCA953X
-+	select ATH79_DEV_AP9X_PCI if PCI
-+	select ATH79_DEV_ETH
-+	select ATH79_DEV_GPIO_BUTTONS
-+	select ATH79_DEV_LEDS_GPIO
-+	select ATH79_DEV_M25P80
-+	select ATH79_DEV_USB
-+	select ATH79_DEV_WMAC
-+
- config ATH79_MACH_GL_DOMINO
- 	bool "DOMINO support"
- 	select SOC_AR933X
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
-index 29c9c65bc122c0d02839adf1abb61dcda0795fb6..98281db31a05713168713f3e0fd62f736a2e7614 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
-@@ -115,6 +115,7 @@ obj-$(CONFIG_ATH79_MACH_FRITZ4020)		+= mach-fritz4020.o
- obj-$(CONFIG_ATH79_MACH_GL_AR150)		+= mach-gl-ar150.o
- obj-$(CONFIG_ATH79_MACH_GL_AR300)		+= mach-gl-ar300.o
- obj-$(CONFIG_ATH79_MACH_GL_AR300M)		+= mach-gl-ar300m.o
-+obj-$(CONFIG_ATH79_MACH_GL_AR750)		+= mach-gl-ar750.o
- obj-$(CONFIG_ATH79_MACH_GL_DOMINO)		+= mach-gl-domino.o
- obj-$(CONFIG_ATH79_MACH_GL_INET)		+= mach-gl-inet.o
- obj-$(CONFIG_ATH79_MACH_GL_MIFI)		+= mach-gl-mifi.o
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c
-new file mode 100644
-index 0000000000000000000000000000000000000000..9ee6e29c02139b972a83a555fcd693765bf8194f
---- /dev/null
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c
-@@ -0,0 +1,146 @@
-+/*
-+ * GL.iNet GL-AR750 board support
-+ *
-+ * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/gpio.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "dev-ap9x-pci.h"
-+#include "dev-eth.h"
-+#include "dev-gpio-buttons.h"
-+#include "dev-leds-gpio.h"
-+#include "dev-m25p80.h"
-+#include "dev-usb.h"
-+#include "dev-wmac.h"
-+#include "machtypes.h"
-+
-+#define GL_AR750_GPIO_LED_POWER		12
-+#define GL_AR750_GPIO_LED_WLAN2G	14
-+#define GL_AR750_GPIO_LED_WLAN5G	13
-+
-+#define GL_AR750_GPIO_BTN_RESET		3
-+#define GL_AR750_GPIO_BTN_SW1		0
-+
-+#define GL_AR750_GPIO_I2C_SCL		16
-+#define GL_AR750_GPIO_I2C_SDA		17
-+
-+#define GL_AR750_GPIO_USB_POWER		2
-+
-+#define GL_AR750_KEYS_POLL_INTERVAL	20
-+#define GL_AR750_KEYS_DEBOUNCE_INTERVAL	(3 * GL_AR750_KEYS_POLL_INTERVAL)
-+
-+#define GL_AR750_MAC0_OFFSET		0
-+#define GL_AR750_WMAC2G_CALDATA_OFFSET	0x1000
-+#define GL_AR750_WMAC5G_CALDATA_OFFSET	0x5000
-+
-+static struct gpio_led gl_ar750_leds_gpio[] __initdata = {
-+	{
-+		.name		= "gl-ar750:white:power",
-+		.gpio		= GL_AR750_GPIO_LED_POWER,
-+		.default_state	= LEDS_GPIO_DEFSTATE_KEEP,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "gl-ar750:white:wlan2g",
-+		.gpio		= GL_AR750_GPIO_LED_WLAN2G,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "gl-ar750:white:wlan5g",
-+		.gpio		= GL_AR750_GPIO_LED_WLAN5G,
-+		.active_low	= 1,
-+	},
-+};
-+
-+static struct gpio_keys_button gl_ar750_gpio_keys[] __initdata = {
-+	{
-+		.desc			= "reset",
-+		.type			= EV_KEY,
-+		.code			= KEY_RESTART,
-+		.debounce_interval	= GL_AR750_KEYS_DEBOUNCE_INTERVAL,
-+		.gpio			= GL_AR750_GPIO_BTN_RESET,
-+		.active_low		= 1,
-+	}, {
-+		.desc			= "sw1",
-+		.type			= EV_KEY,
-+		.code			= BTN_0,
-+		.debounce_interval	= GL_AR750_KEYS_DEBOUNCE_INTERVAL,
-+		.gpio			= GL_AR750_GPIO_BTN_SW1,
-+		.active_low		= 1,
-+	},
-+};
-+
-+static struct i2c_gpio_platform_data gl_ar750_i2c_gpio_data = {
-+	.sda_pin = GL_AR750_GPIO_I2C_SDA,
-+	.scl_pin = GL_AR750_GPIO_I2C_SCL,
-+};
-+
-+static struct platform_device gl_ar750_i2c_gpio = {
-+	.name	= "i2c-gpio",
-+	.id	= 0,
-+	.dev	= {
-+		.platform_data = &gl_ar750_i2c_gpio_data,
-+	},
-+};
-+
-+static void __init gl_ar750_setup(void)
-+{
-+	u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
-+
-+	ath79_register_m25p80(NULL);
-+
-+	ath79_setup_ar933x_phy4_switch(false, false);
-+	ath79_register_mdio(0, 0x0);
-+
-+	ath79_switch_data.phy4_mii_en = 1;
-+	ath79_switch_data.phy_poll_mask = 0xfc;
-+
-+	/* WAN */
-+	ath79_eth0_data.duplex = DUPLEX_FULL;
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-+	ath79_eth0_data.phy_mask = BIT(4);
-+	ath79_eth0_data.speed = SPEED_100;
-+	ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 0);
-+	ath79_register_eth(0);
-+
-+	/* LAN */
-+	ath79_eth1_data.duplex = DUPLEX_FULL;
-+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-+	ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 1);
-+	ath79_register_eth(1);
-+
-+	/* Disable JTAG (enables GPIO0-3) */
-+	ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750_leds_gpio),
-+				 gl_ar750_leds_gpio);
-+
-+	ath79_register_gpio_keys_polled(-1, GL_AR750_KEYS_POLL_INTERVAL,
-+					ARRAY_SIZE(gl_ar750_gpio_keys),
-+					gl_ar750_gpio_keys);
-+
-+	gpio_request_one(GL_AR750_GPIO_USB_POWER,
-+			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
-+			 "USB power");
-+
-+	platform_device_register(&gl_ar750_i2c_gpio);
-+
-+	ath79_register_usb();
-+
-+	ath79_register_wmac(art + GL_AR750_WMAC2G_CALDATA_OFFSET, NULL);
-+
-+	ap91_pci_init(art + GL_AR750_WMAC5G_CALDATA_OFFSET, NULL);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_GL_AR750, "GL-AR750", "GL.iNet GL-AR750",
-+	     gl_ar750_setup);
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-index 89ddbbc976c9393608a80b9ce56e02a4d403ea2a..11ccdbb5083807ef137b8cd2d110de7a97a34e38 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-@@ -106,6 +106,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_GL_AR150,			/* GL-AR150 support */
- 	ATH79_MACH_GL_AR300,			/* GL-AR300 */
- 	ATH79_MACH_GL_AR300M,			/* GL-AR300M */
-+	ATH79_MACH_GL_AR750,			/* GL.iNet GL-AR750 */
- 	ATH79_MACH_GL_DOMINO,			/* Domino */
- 	ATH79_MACH_GL_INET,			/* GL-CONNECT GL-INET */
- 	ATH79_MACH_GL_MIFI,			/* GL-MIFI support */
-diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
-index d113c5ad621bb2f15d4cbc4fd50e60904313a7da..d1375c8742d8aea6224f7aca3d9e9522d8056a94 100644
---- a/target/linux/ar71xx/image/generic.mk
-+++ b/target/linux/ar71xx/image/generic.mk
-@@ -161,6 +161,19 @@ define Device/gl-ar300m
- endef
- TARGET_DEVICES += gl-ar300m
- 
-+define Device/gl-ar750
-+  DEVICE_TITLE := GL.iNet GL-AR750
-+  DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887 kmod-usb-core \
-+	kmod-usb2 kmod-usb-storage
-+  BOARDNAME := GL-AR750
-+  SUPPORTED_DEVICES := gl-ar750
-+  IMAGE_SIZE := 16000k
-+  MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
-+  IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
-+	append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-+endef
-+TARGET_DEVICES += gl-ar750
-+
- define Device/gl-domino
-   DEVICE_TITLE := GL Domino Pi
-   DEVICE_PACKAGES := kmod-usb-core kmod-usb2

patches/lede/0088-uboot-envtools-add-support-for-GL.iNet-GL-AR750.patch

-From: Piotr Dymacz <pepe2k@gmail.com>
-Date: Tue, 17 Oct 2017 23:32:11 +0200
-Subject: uboot-envtools: add support for GL.iNet GL-AR750
-
-Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
-
-diff --git a/package/boot/uboot-envtools/files/ar71xx b/package/boot/uboot-envtools/files/ar71xx
-index 25bec7eb33fd691bae417512c4c03e133d93213d..26f1ff938b8191e84315cf308f78e0907264c671 100644
---- a/package/boot/uboot-envtools/files/ar71xx
-+++ b/package/boot/uboot-envtools/files/ar71xx
-@@ -29,6 +29,7 @@ cr3000|\
- cr5000|\
- eap300v2|\
- gl-ar300m|\
-+gl-ar750|\
- hornet-ub|\
- hornet-ub-x2|\
- jwap230|\

patches/lede/0089-ar71xx-add-model-detection-for-UBNT-AC-Mesh.patch

-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 25 Feb 2018 12:09:38 +0100
-Subject: ar71xx: add model detection for UBNT AC-Mesh
-
-This commit adds correct model detection for UniFi
-AC-Mesh. Previously said device was incorrectly detected
-as UniFi AC-Lite.
-
-The Information about the device is stored at 0xC in the EEPROM
-partition. It corresponds to the sysid in /etc/board.info of the
-Ubiquiti stock firmware.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-
-diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-index 35b742a5f1fee0bc24ab2d88e32f118c1df4e2b3..59c1899a588007d6a6a1860fcf95064b0ec35561 100755
---- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
-+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-@@ -98,6 +98,27 @@ ubnt_xm_board_detect() {
- 	[ -z "$model" ] || AR71XX_MODEL="${model}${magic:3:1}"
- }
- 
-+ubnt_ac_lite_get_mtd_part_magic() {
-+	ar71xx_get_mtd_offset_size_format EEPROM 12 2 %02x
-+}
-+
-+ubnt_ac_lite_board_detect() {
-+	local model
-+	local magic
-+
-+	magic="$(ubnt_ac_lite_get_mtd_part_magic)"
-+	case ${magic:0:4} in
-+	"e517")
-+		model="Ubiquiti UniFi-AC-LITE"
-+		;;
-+	"e557")
-+		model="Ubiquiti UniFi-AC-MESH"
-+		;;
-+	esac
-+
-+	[ -z "$model" ] || AR71XX_MODEL="${model}"
-+}
-+
- cybertan_get_hw_magic() {
- 	local part
- 
-@@ -1129,6 +1150,7 @@ ar71xx_board_detect() {
- 		;;
- 	*"UniFi-AC-LITE")
- 		name="unifiac-lite"
-+		ubnt_ac_lite_board_detect
- 		;;
- 	*"UniFi-AC-PRO")
- 		name="unifiac-pro"

patches/lede/0090-ar71xx-generic-enable-CONFIG_MTD_SPLIT_TPLINK_FW.patch

-From: Piotr Dymacz <pepe2k@gmail.com>
-Date: Mon, 3 Jul 2017 18:57:36 +0200
-Subject: ar71xx: generic: enable CONFIG_MTD_SPLIT_TPLINK_FW
-
-We can use "tplink-fw" mtd splitter for TP-Link devices which use kernel
-with TP-Link header embedded inside "safeloader" image type and thus get
-rid of statically defined "kernel" and "rootfs" partitions in cmdline.
-
-Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
-
-diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
-index d96642b97c36187febb1f3843e7dd9acfab0e40d..6c29cd7748b3ce7e53adf359cd5002ba01066fbd 100644
---- a/target/linux/ar71xx/config-4.4
-+++ b/target/linux/ar71xx/config-4.4
-@@ -379,6 +379,7 @@ CONFIG_MTD_SPLIT_EVA_FW=y
- CONFIG_MTD_SPLIT_FIRMWARE=y
- CONFIG_MTD_SPLIT_LZMA_FW=y
- CONFIG_MTD_SPLIT_SEAMA_FW=y
-+CONFIG_MTD_SPLIT_TPLINK_FW=y
- CONFIG_MTD_SPLIT_UIMAGE_FW=y
- CONFIG_MTD_SPLIT_WRGG_FW=y
- CONFIG_MTD_TPLINK_PARTS=y
-diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
-index e0401102229c00985e8000331dce43375903e1aa..f5d48ae0f674883371f8d549594f695913c3d216 100644
---- a/target/linux/ar71xx/mikrotik/config-default
-+++ b/target/linux/ar71xx/mikrotik/config-default
-@@ -219,6 +219,7 @@ CONFIG_MTD_NAND_RB4XX=y
- CONFIG_MTD_NAND_RB750=y
- CONFIG_MTD_NAND_RB91X=y
- # CONFIG_MTD_SPLIT_EVA_FW is not set
-+# CONFIG_MTD_SPLIT_TPLINK_FW is not set
- # CONFIG_MTD_REDBOOT_PARTS is not set
- # CONFIG_MTD_TPLINK_PARTS is not set
- CONFIG_MTD_UBI=y
-diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
-index 790fa8f9bd42aba8521b960c2a49a742285e6157..0eee52d3ee69990fadf77de9f03f03c9c9b59190 100644
---- a/target/linux/ar71xx/nand/config-default
-+++ b/target/linux/ar71xx/nand/config-default
-@@ -107,6 +107,7 @@ CONFIG_MTD_NAND_ECC_BCH=y
- # CONFIG_MTD_SM_COMMON is not set
- # CONFIG_MTD_SPLIT_EVA_FW is not set
- # CONFIG_MTD_SPLIT_SEAMA_FW is not set
-+# CONFIG_MTD_SPLIT_TPLINK_FW is not set
- # CONFIG_MTD_TPLINK_PARTS is not set
- CONFIG_MTD_UBI=y
- CONFIG_MTD_UBI_BEB_LIMIT=20

patches/lede/0091-mac80211-initialize-sinfo-in-cfg80211_get_station.patch

-From: Sven Eckelmann <sven.eckelmann@openmesh.com>
-Date: Wed, 6 Jun 2018 11:21:53 +0200
-Subject: mac80211: initialize sinfo in cfg80211_get_station
-
-Most of the implementations behind cfg80211_get_station will not initialize
-sinfo to zero before manipulating it. For example, the member "filled",
-which indicates the filled in parts of this struct, is often only modified
-by enabling certain bits in the bitfield while keeping the remaining bits
-in their original state. A caller without a preinitialized sinfo.filled can
-then no longer decide which parts of sinfo were filled in by
-cfg80211_get_station (or actually the underlying implementations).
-
-cfg80211_get_station must therefore take care that sinfo is initialized to
-zero. Otherwise, the caller may tries to read information which was not
-filled in and which must therefore also be considered uninitialized. In
-batadv_v_elp_get_throughput's case, an invalid "random" expected throughput
-may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may
-switch to non-optimal neighbors for certain destinations.
-
-Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
-
-Forwarded: https://github.com/openwrt/openwrt/pull/1015
-
-diff --git a/package/kernel/mac80211/patches/379-cfg80211-initialize-sinfo-in-cfg80211_get_station.patch b/package/kernel/mac80211/patches/379-cfg80211-initialize-sinfo-in-cfg80211_get_station.patch
-new file mode 100644
-index 0000000000000000000000000000000000000000..37323c1f7defee830b3f876a46f255acf21fce42
---- /dev/null
-+++ b/package/kernel/mac80211/patches/379-cfg80211-initialize-sinfo-in-cfg80211_get_station.patch
-@@ -0,0 +1,42 @@
-+From 4f717a2589be649afddbbd3ac58b67ebfa7426f7 Mon Sep 17 00:00:00 2001
-+From: Sven Eckelmann <sven@narfation.org>
-+Date: Wed, 6 Jun 2018 10:18:31 +0200
-+Subject: [PATCH v2] cfg80211: initialize sinfo in cfg80211_get_station
-+
-+Most of the implementations behind cfg80211_get_station will not initialize
-+sinfo to zero before manipulating it. For example, the member "filled",
-+which indicates the filled in parts of this struct, is often only modified
-+by enabling certain bits in the bitfield while keeping the remaining bits
-+in their original state. A caller without a preinitialized sinfo.filled can
-+then no longer decide which parts of sinfo were filled in by
-+cfg80211_get_station (or actually the underlying implementations).
-+
-+cfg80211_get_station must therefore take care that sinfo is initialized to
-+zero. Otherwise, the caller may tries to read information which was not
-+filled in and which must therefore also be considered uninitialized. In
-+batadv_v_elp_get_throughput's case, an invalid "random" expected throughput
-+may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may
-+switch to non-optimal neighbors for certain destinations.
-+
-+Fixes: 7406353d43c8 ("cfg80211: implement cfg80211_get_station cfg80211 API")
-+Reported-by: Thomas Lauer <holminateur@gmail.com>
-+Reported-by: Marcel Schmidt <ff.z-casparistrasse@mailbox.org>
-+Cc: b.a.t.m.a.n@lists.open-mesh.org
-+Signed-off-by: Sven Eckelmann <sven@narfation.org>
-+
-+Forwarded: https://patchwork.kernel.org/patch/10449857/
-+---
-+ net/wireless/util.c | 2 ++
-+ 1 file changed, 2 insertions(+)
-+
-+--- a/net/wireless/util.c
-++++ b/net/wireless/util.c
-+@@ -1749,6 +1749,8 @@ int cfg80211_get_station(struct net_devi
-+ 	if (!rdev->ops->get_station)
-+ 		return -EOPNOTSUPP;
-+ 
-++	memset(sinfo, 0, sizeof(*sinfo));
-++
-+ 	return rdev_get_station(rdev, dev, mac_addr, sinfo);
-+ }
-+ EXPORT_SYMBOL(cfg80211_get_station);

patches/lede/0092-ar71xx-lzma-loader-move-padding-workaround-to-gzip-step.patch

-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Wed, 6 Jun 2018 20:51:05 +0200
-Subject: ar71xx: lzma-loader: move padding workaround to gzip step
-
-Some devices (TP-Link TL-WR1043ND v1) don't boot reliably when the
-uncompressed loader is too small. This was workarounded in the loader by
-adding 512KB of padding to the .data section of the loader binary.
-
-This approach had two issues:
-
-- The padding was only working when .data was non-empty (otherwise the
-  section would become NOBITS, omitting it in the binary). .data was only
-  empty when no CMDLINE was set, leading to further workarounds like
-  fe594bf90d09 ("ath79: fix loader-okli, lzma-loader"), and this
-  workaround was only effective because a missing "const" led to the kernel
-  argv being stored in .data instead of .rodata
-- The padding was not only added to the compressed .gz loader, but also
-  uncompressed .bin and .elf loaders. The prevented embedding the kernel
-  cmdline in the loader for non-gz loader types.
-
-To fix both issues, move the creation of the padding from the linker script
-to the gzip step.
-
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
-
-diff --git a/target/linux/ar71xx/image/lzma-loader/Makefile b/target/linux/ar71xx/image/lzma-loader/Makefile
-index 9b81e87306f235d1e7284401828240b9b9787011..738093a958013624abb8f84a3874e1c795da349d 100644
---- a/target/linux/ar71xx/image/lzma-loader/Makefile
-+++ b/target/linux/ar71xx/image/lzma-loader/Makefile
-@@ -47,7 +47,11 @@ loader-compile: $(PKG_BUILD_DIR)/.prepared
- 		clean all
- 
- loader.gz: $(PKG_BUILD_DIR)/loader.bin
--	gzip -nc9 $< > $(LOADER_GZ)
-+	# Workaround for buggy bootloaders: Some devices
-+	# (TP-Link TL-WR1043ND v1) don't work correctly when
-+	# the uncompressed loader is too small (probably a cache
-+	# invalidation issue)
-+	dd if=$< bs=512K conv=sync | gzip -nc9 > $(LOADER_GZ)
- 
- loader.elf: $(PKG_BUILD_DIR)/loader.elf
- 	$(CP) $< $(LOADER_ELF)
-diff --git a/target/linux/ar71xx/image/lzma-loader/src/loader.lds b/target/linux/ar71xx/image/lzma-loader/src/loader.lds
-index 80cc7ca3ecf53a747fc139560b89c233f4343293..01ff85236147dc62bae480b191a44005171b1561 100644
---- a/target/linux/ar71xx/image/lzma-loader/src/loader.lds
-+++ b/target/linux/ar71xx/image/lzma-loader/src/loader.lds
-@@ -13,7 +13,6 @@ SECTIONS {
- 	.data : {
- 		*(.data)
- 		*(.data.*)
--		. = . + 524288;		/* workaround for buggy bootloaders */
- 	}
- 
- 	. = ALIGN(32);

patches/lede/0093-ar71xx-lzma-loader-set-page-size-to-4KB.patch

-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Wed, 6 Jun 2018 00:27:42 +0200
-Subject: ar71xx: lzma-loader: set page size to 4KB
-
-The text section in the ELF loader is aligned to the maximum page size,
-which defaults to 64KB. Reduce it to the actual page size to avoid wasting
-flash space for this alignment.
-
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
-
-diff --git a/target/linux/ar71xx/image/lzma-loader/src/Makefile b/target/linux/ar71xx/image/lzma-loader/src/Makefile
-index 5f10bdb8f1499f24f00a8bf4d53f370fef88bd1e..fadb7e6206070c07aab3e8b323324976c6998eea 100644
---- a/target/linux/ar71xx/image/lzma-loader/src/Makefile
-+++ b/target/linux/ar71xx/image/lzma-loader/src/Makefile
-@@ -95,7 +95,7 @@ loader2.o: loader.bin
- 	$(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $<
- 
- loader.elf: loader2.o
--	$(LD) -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $<
-+	$(LD) -z max-page-size=0x1000 -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $<
- 
- mrproper: clean
- 

patches/lede/0094-ar71xx-lzma-loader-constify-kernel-argv-array.patch

-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Wed, 6 Jun 2018 00:30:57 +0200
-Subject: ar71xx: lzma-loader: constify kernel argv array
-
-By making the kernel argv array const, the .data section can always be
-omitted from the laoder binary.
-
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
-
-diff --git a/target/linux/ar71xx/image/lzma-loader/src/loader.c b/target/linux/ar71xx/image/lzma-loader/src/loader.c
-index cc73eb1721cbfbf2ad1bb94e8e6d3ab006983c5d..794c4b6285a7fa0423c22d172828415e6f2be93b 100644
---- a/target/linux/ar71xx/image/lzma-loader/src/loader.c
-+++ b/target/linux/ar71xx/image/lzma-loader/src/loader.c
-@@ -75,7 +75,7 @@ static unsigned long kernel_la;
- #ifdef CONFIG_KERNEL_CMDLINE
- #define kernel_argc	2
- static const char kernel_cmdline[] = CONFIG_KERNEL_CMDLINE;
--static const char *kernel_argv[] = {
-+static const char *const kernel_argv[] = {
- 	NULL,
- 	kernel_cmdline,
- 	NULL,

patches/lede/0095-ar71xx-make-loader-okli-build-step-more-generic.patch

-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Wed, 6 Jun 2018 00:34:25 +0200
-Subject: ar71xx: make loader-okli build step more generic
-
-Add support for different loader types.
-
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
-
-diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
-index 8eac5fc997cab0203718fb0558e6f5aaaeec9c38..de27f5d7c5ce6dbd31305c139afc128edaed15ee 100644
---- a/target/linux/ar71xx/image/Makefile
-+++ b/target/linux/ar71xx/image/Makefile
-@@ -73,8 +73,9 @@ define Build/loader-kernel-cmdline
- 	$(call Build/loader-common,LOADER_DATA="$@" KERNEL_CMDLINE="$(CMDLINE)")
- endef
- 
-+# Arguments: <output name> <kernel offset>
- define Build/loader-okli
--	dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new"
-+	dd if=$(KDIR)/loader-$(word 1,$(1)).$(LOADER_TYPE) bs=$(word 2,$(1)) conv=sync of="$@.new"
- 	cat "$@" >> "$@.new"
- 	mv "$@.new" "$@"
- endef
-diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
-index 1e40d943ac2aa43aea670fd86268708aea39a46c..18e2c73737f477f4d00020893878cbdfb81a735b 100644
---- a/target/linux/ar71xx/image/tp-link.mk
-+++ b/target/linux/ar71xx/image/tp-link.mk
-@@ -69,7 +69,7 @@ $(Device/tplink)
-   LOADER_FLASH_OFFS := 0x22000
-   COMPILE := loader-$(1).gz
-   COMPILE/loader-$(1).gz := loader-okli-compile
--  KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
-+  KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 7680
-   KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel-cmdline | mktplinkfw-combined
- endef
- 

patches/lede/0096-ar71xx-switch-CPE-WBS-210-510-to-okli-loader.patch

-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Wed, 6 Jun 2018 00:35:17 +0200
-Subject: ar71xx: switch CPE/WBS 210/510 to okli-loader
-
-We recently increased the kernel partition size of the CPE/WBS 210/510.
-This works fine for new installations of the factory image, but on
-sysupgrades, the partition table read by the bootloader is not adjusted.
-This limits the maximum size of the kernel loaded by the bootloader to the
-old partition size.
-
-While adjusting the partition table would be a cleanest solution, such a
-migration would have to happen before an upgrade to a new version with a
-newer kernel. This is error-prone and would require a two-step upgrade, as
-we mark the partition table partition read-only.
-
-Instead, switch from the lzma-loader with embedded kernel to the
-okli-loader, so only the tiny lzma-loader is loaded by the bootloader as
-"kernel", and the lzma-loader will then load the rest of the kernel by
-itself.
-
-Fixes: e39847ea2f70 ("ar71xx: increase kernel partition size for CPE/WBS 210/510")
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
-
-diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
-index 18e2c73737f477f4d00020893878cbdfb81a735b..709b1558a5f8487c50e922ec4d27b643f080cbcc 100644
---- a/target/linux/ar71xx/image/tp-link.mk
-+++ b/target/linux/ar71xx/image/tp-link.mk
-@@ -173,7 +173,10 @@ define Device/cpe510-520
-   TPLINK_BOARD_NAME := CPE510
-   DEVICE_PROFILE := CPE510
-   LOADER_TYPE := elf
--  KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel
-+  LOADER_FLASH_OFFS := 0x43000
-+  COMPILE := loader-$(1).elf
-+  COMPILE/loader-$(1).elf := loader-okli-compile
-+  KERNEL := kernel-bin | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 12288
-   IMAGES := sysupgrade.bin factory.bin
-   IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
-   IMAGE/factory.bin := append-rootfs | tplink-safeloader factory

patches/lede/0097-ar71xx-add-support-for-TP-Link-TL-WA901ND-v5.patch

-From: Paul Wassi <p.wassi@gmx.at>
-Date: Sun, 22 Oct 2017 22:39:30 +0200
-Subject: ar71xx: add support for TP-Link TL-WA901ND v5
-
-The TL-WA901ND v5 has the same hardware as v4, although the PCB has
-a different layout. Installation from factory is done via TFTP.
-(rename -factory image to wa901ndv4_tp_recovery.bin for tftp)
-
-Signed-off-by: Paul Wassi <p.wassi@gmx.at>
-
-diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-index f94cc3c85b798458cc97c06bb0d44bdc426d057d..a742854bc9b0aa48c61b37e58288177bbb56d14d 100755
---- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
-+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-@@ -606,7 +606,8 @@ tl-wa860re|\
- tl-wa830re-v2|\
- tl-wa801nd-v2|\
- tl-wa901nd-v3|\
--tl-wa901nd-v4)
-+tl-wa901nd-v4|\
-+tl-wa901nd-v5)
- 	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
- 	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
- 	;;
-diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
-index c8990c60f504286d0fd28c7b17f54c9c3b5a891e..875a1a38ada9fb66503505d2f094310db1295a07 100755
---- a/target/linux/ar71xx/base-files/etc/board.d/02_network
-+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
-@@ -110,6 +110,7 @@ ar71xx_setup_interfaces()
- 	tl-wa901nd-v2|\
- 	tl-wa901nd-v3|\
- 	tl-wa901nd-v4|\
-+	tl-wa901nd-v5|\
- 	tl-wr703n|\
- 	tl-wr802n-v1|\
- 	tube2h|\
-diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
-index 01d3b787bedcab82a5797c9a4801e8139887cc2c..f8d2eb314f7b57a1134b68c504c0dac202ed947c 100644
---- a/target/linux/ar71xx/base-files/etc/diag.sh
-+++ b/target/linux/ar71xx/base-files/etc/diag.sh
-@@ -363,6 +363,7 @@ get_status_led() {
- 	tl-wa901nd-v2|\
- 	tl-wa901nd-v3|\
- 	tl-wa901nd-v4|\
-+	tl-wa901nd-v5|\
- 	tl-wdr3320-v2|\
- 	tl-wdr3500|\
- 	tl-wr1041n-v2|\
-diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-index 59c1899a588007d6a6a1860fcf95064b0ec35561..b365b6ae4aa6021960499b3889d846b5171eec0f 100755
---- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
-+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-@@ -1058,6 +1058,9 @@ ar71xx_board_detect() {
- 	*"TL-WA901ND v4")
- 		name="tl-wa901nd-v4"
- 		;;
-+	*"TL-WA901ND v5")
-+		name="tl-wa901nd-v5"
-+		;;
- 	*"TL-WDR3320 v2")
- 		name="tl-wdr3320-v2"
- 		;;
-diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-index 236520b27c4d6d0b1b7e483d1100fb5ab156d475..0b422d71c2639a31bc7e88a20976266b66ec4490 100755
---- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-@@ -415,6 +415,7 @@ platform_check_image() {
- 	tl-wa901nd-v2|\
- 	tl-wa901nd-v3|\
- 	tl-wa901nd-v4|\
-+	tl-wa901nd-v5|\
- 	tl-wa901nd|\
- 	tl-wdr3320-v2|\
- 	tl-wdr3500|\
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v4.c
-index 9c651bb1d256bc13a3fe31b664f2cd3590e8092f..ffbcd6fe42df9b7c0dd86ae23a21ab7c90917a8c 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v4.c
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v4.c
-@@ -1,5 +1,5 @@
- /*
-- *  TP-LINK TL-WA901ND v4 board
-+ *  TP-LINK TL-WA901ND v4, v5 board
-  *
-  *  Copyright (C) 2015 Matthias Schiffer <mschiffer@universe-factory.net>
-  *  Copyright (C) 2016 Tiziano Bacocco <tizbac2@gmail.com>
-@@ -110,3 +110,6 @@ static void __init TL_WA901ND_V4_setup(void)
- 
- MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V4, "TL-WA901ND-v4", "TP-LINK TL-WA901ND v4",
- 	     TL_WA901ND_V4_setup);
-+
-+MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V5, "TL-WA901ND-v5", "TP-LINK TL-WA901ND v5",
-+	     TL_WA901ND_V4_setup);
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-index 11ccdbb5083807ef137b8cd2d110de7a97a34e38..a4c7f52fe94e17bc48bebfb460f12f3e5ac35afe 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-@@ -213,6 +213,7 @@ enum ath79_mach_type {
- 	ATH79_MACH_TL_WA901ND_V2,		/* TP-LINK TL-WA901ND v2 */
- 	ATH79_MACH_TL_WA901ND_V3,		/* TP-LINK TL-WA901ND v3 */
- 	ATH79_MACH_TL_WA901ND_V4,		/* TP-LINK TL-WA901ND v4 */
-+	ATH79_MACH_TL_WA901ND_V5,		/* TP-LINK TL-WA901ND v5 */
- 	ATH79_MACH_TL_WDR3320_V2,		/* TP-LINK TL-WDR3320 v2 */
- 	ATH79_MACH_TL_WDR3500,			/* TP-LINK TL-WDR3500 */
- 	ATH79_MACH_TL_WDR4300,			/* TP-LINK TL-WDR4300 */
-diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
-index 709b1558a5f8487c50e922ec4d27b643f080cbcc..6a3faef518ebfa4f36d3074ee9c102b801e04275 100644
---- a/target/linux/ar71xx/image/tp-link.mk
-+++ b/target/linux/ar71xx/image/tp-link.mk
-@@ -1103,7 +1103,13 @@ define Device/tl-wa901nd-v4
-     IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C EU
- endef
- 
--TARGET_DEVICES += tl-wa901nd-v1 tl-wa901nd-v2 tl-wa901nd-v3 tl-wa901nd-v4
-+define Device/tl-wa901nd-v5
-+  $(Device/tl-wa901nd-v4)
-+  DEVICE_TITLE := TP-LINK TL-WA901N/ND v5
-+  BOARDNAME := TL-WA901ND-v5
-+  TPLINK_HWID := 0x09010005
-+endef
-+TARGET_DEVICES += tl-wa901nd-v1 tl-wa901nd-v2 tl-wa901nd-v3 tl-wa901nd-v4 tl-wa901nd-v5
- 
- define Device/tl-wa7210n-v2
-     $(Device/tplink-4mlzma)

patches/lede/0098-ar71xx-disable-40Mhz-refclk-for-QCA953x.patch

-From: Sven Eckelmann <sven@narfation.org>
-Date: Fri, 19 Jan 2018 14:02:09 +0100
-Subject: ar71xx: disable 40Mhz refclk for QCA953x
-
-The "QCA9531 v2.0 802.11n 2x2 2.4 GHz Premium SOC for WLAN Platforms"
-datasheet (80-Y7991-1 Rev. C - October 2014) doesn't specify support for a
-40 Mhz reference clock. The register description for "Bootstrap Options"
-(page 31) defines following states for the bit 4 (REF_CLK):
-
-* 0 - CLK25 (default)
-* 1 - (reserved)
-
-Devices like the TP-Link CPE210 v2 has this bit set to 1 but is using a 25
-Mhz reference clock. OpenWrt is still interpreted this bit as 40 Mhz and
-then break the bootup of the system due to this incorrect interpretation.
-
-Signed-off-by: Sven Eckelmann <sven@narfation.org>
-[refreshed patches]
-Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
-
-Origin: backport, https://github.com/openwrt/openwrt/commit/b1d57dadb2da0e010e157fd2383523578c9dcc2e
-
-diff --git a/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
-index 777f7b2c8838f2c93f79d5d5212f90b2bd82ced3..d55c97165a5abad8cb25fcc6ddc29415f238c7e6 100644
---- a/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
-+++ b/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
-@@ -44,7 +44,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
-  config ATH79_NVRAM
- --- a/arch/mips/ath79/clock.c
- +++ b/arch/mips/ath79/clock.c
--@@ -354,6 +354,91 @@ static void __init ar934x_clocks_init(vo
-+@@ -354,6 +354,87 @@ static void __init ar934x_clocks_init(vo
-  	iounmap(dpll_base);
-  }
-  
-@@ -56,13 +56,9 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
- +	unsigned long ahb_rate;
- +	u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
- +	u32 cpu_pll, ddr_pll;
--+	u32 bootstrap;
- +
--+	bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
--+	if (bootstrap &	QCA953X_BOOTSTRAP_REF_CLK_40)
--+		ref_rate = 40 * 1000 * 1000;
--+	else
--+		ref_rate = 25 * 1000 * 1000;
-++	/* QCA953X only supports 25MHz ref_clk */
-++	ref_rate = 25 * 1000 * 1000;
- +
- +	pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
- +	out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-@@ -136,7 +132,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
-  static void __init qca955x_clocks_init(void)
-  {
-  	unsigned long ref_rate;
--@@ -451,6 +536,8 @@ void __init ath79_clocks_init(void)
-+@@ -451,6 +532,8 @@ void __init ath79_clocks_init(void)
-  		ar933x_clocks_init();
-  	else if (soc_is_ar934x())
-  		ar934x_clocks_init();
-@@ -247,14 +243,12 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
-  
-  	ath79_wmac_data.external_reset = ar933x_wmac_reset;
-  }
--@@ -151,6 +151,26 @@ static void ar934x_wmac_setup(void)
-+@@ -151,6 +151,21 @@ static void ar934x_wmac_setup(void)
-  	ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
-  }
-  
- +static void qca953x_wmac_setup(void)
- +{
--+	u32 t;
--+
- +	ath79_wmac_device.name = "qca953x_wmac";
- +
- +	ath79_wmac_resources[0].start = QCA953X_WMAC_BASE;
-@@ -262,11 +256,8 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
- +	ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
- +	ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
- +
--+	t = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
--+	if (t & QCA953X_BOOTSTRAP_REF_CLK_40)
--+		ath79_wmac_data.is_clk_25mhz = false;
--+	else
--+		ath79_wmac_data.is_clk_25mhz = true;
-++	/* QCA953X only supports 25MHz ref_clk */
-++	ath79_wmac_data.is_clk_25mhz = true;
- +
- +	ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
- +}
-@@ -274,7 +265,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
-  static void qca955x_wmac_setup(void)
-  {
-  	u32 t;
--@@ -368,6 +388,8 @@ void __init ath79_register_wmac(u8 *cal_
-+@@ -368,6 +383,8 @@ void __init ath79_register_wmac(u8 *cal_
-  		ar933x_wmac_setup();
-  	else if (soc_is_ar934x())
-  		ar934x_wmac_setup();
-@@ -550,7 +541,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
- +#define QCA953X_BOOTSTRAP_SW_OPTION2	BIT(12)
- +#define QCA953X_BOOTSTRAP_SW_OPTION1	BIT(11)
- +#define QCA953X_BOOTSTRAP_EJTAG_MODE	BIT(5)
--+#define QCA953X_BOOTSTRAP_REF_CLK_40	BIT(4)
-++#define QCA953X_BOOTSTRAP_REF_CLK	BIT(4)
- +#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
- +#define QCA953X_BOOTSTRAP_DDR1		BIT(0)
- +
-diff --git a/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
-index ed90c40d882fcff1a451533748912865cc78c6e8..de0ee4604cdeb946bab222cacaa51fb150b25aab 100644
---- a/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
-+++ b/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
-@@ -24,7 +24,7 @@
-  config ATH79_NVRAM
- --- a/arch/mips/ath79/clock.c
- +++ b/arch/mips/ath79/clock.c
--@@ -524,6 +524,100 @@ static void __init qca955x_clocks_init(v
-+@@ -520,6 +520,100 @@ static void __init qca955x_clocks_init(v
-  	clk_add_alias("uart", NULL, "ref", NULL);
-  }
-  
-@@ -125,7 +125,7 @@
-  void __init ath79_clocks_init(void)
-  {
-  	if (soc_is_ar71xx())
--@@ -540,6 +634,8 @@ void __init ath79_clocks_init(void)
-+@@ -536,6 +630,8 @@ void __init ath79_clocks_init(void)
-  		qca953x_clocks_init();
-  	else if (soc_is_qca955x())
-  		qca955x_clocks_init();
-@@ -219,7 +219,7 @@
-  }
- --- a/arch/mips/ath79/dev-wmac.c
- +++ b/arch/mips/ath79/dev-wmac.c
--@@ -189,6 +189,26 @@ static void qca955x_wmac_setup(void)
-+@@ -184,6 +184,26 @@ static void qca955x_wmac_setup(void)
-  		ath79_wmac_data.is_clk_25mhz = true;
-  }
-  
-@@ -246,7 +246,7 @@
-  static bool __init
-  ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
-  {
--@@ -392,6 +412,8 @@ void __init ath79_register_wmac(u8 *cal_
-+@@ -387,6 +407,8 @@ void __init ath79_register_wmac(u8 *cal_
-  		qca953x_wmac_setup();
-  	else if (soc_is_qca955x())
-  		qca955x_wmac_setup();
-diff --git a/target/linux/ar71xx/patches-4.4/631-MIPS-ath79-wmac-enable-set-led-pin.patch b/target/linux/ar71xx/patches-4.4/631-MIPS-ath79-wmac-enable-set-led-pin.patch
-index 16a0b909c570b403473346b0c992f9de02b67132..b0e15379787ade16a02363c78c143e878f27a7f2 100644
---- a/target/linux/ar71xx/patches-4.4/631-MIPS-ath79-wmac-enable-set-led-pin.patch
-+++ b/target/linux/ar71xx/patches-4.4/631-MIPS-ath79-wmac-enable-set-led-pin.patch
-@@ -1,6 +1,6 @@
- --- a/arch/mips/ath79/dev-wmac.c
- +++ b/arch/mips/ath79/dev-wmac.c
--@@ -400,6 +400,11 @@ void __init ath79_wmac_set_ext_lna_gpio(
-+@@ -395,6 +395,11 @@ void __init ath79_wmac_set_ext_lna_gpio(
-  		ar934x_set_ext_lna_gpio(chain, gpio);
-  }
-  
-diff --git a/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch b/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
-index 8aa5957a7152af27854f6f7c197120b8029cf9e8..b59e43c7712a18e5e81944361c358dfb08c488ea 100644
---- a/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
-+++ b/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
-@@ -32,7 +32,7 @@
-   */
- --- a/arch/mips/ath79/dev-wmac.c
- +++ b/arch/mips/ath79/dev-wmac.c
--@@ -171,6 +171,27 @@ static void qca953x_wmac_setup(void)
-+@@ -166,6 +166,27 @@ static void qca953x_wmac_setup(void)
-  	ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
-  }
-  
-@@ -60,7 +60,7 @@
-  static void qca955x_wmac_setup(void)
-  {
-  	u32 t;
--@@ -187,6 +208,8 @@ static void qca955x_wmac_setup(void)
-+@@ -182,6 +203,8 @@ static void qca955x_wmac_setup(void)
-  		ath79_wmac_data.is_clk_25mhz = false;
-  	else
-  		ath79_wmac_data.is_clk_25mhz = true;

patches/lede/0099-ar71xx-Add-TP-Link-Pharos-v2-board-detection.patch

-From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-Date: Fri, 19 Jan 2018 12:58:40 +0100
-Subject: ar71xx: Add TP-Link Pharos v2 board detection
-
-Add support for detecting TP-Link Pharos v2 boards.
-They use different format in product-info partition than v1 boards.
-
-Code was written mostly by Alexander Couzens <lynxis@fe80.eu>
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-
-Origin: backport, https://github.com/openwrt/openwrt/commit/2524febf7927a1bf430d64b7790feb126023e3d1
-
-diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-index b365b6ae4aa6021960499b3889d846b5171eec0f..94311f75989b0861e188dc89b3e714b5545c1ad8 100755
---- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
-+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
-@@ -375,7 +375,7 @@ tplink_pharos_get_model_string() {
- }
- 
- tplink_pharos_board_detect() {
--	local model_string="$(tplink_pharos_get_model_string | tr -d '\r')"
-+	local model_string="$1"
- 	local oIFS="$IFS"; IFS=":"; set -- $model_string; IFS="$oIFS"
- 
- 	local model="${1%%\(*}"
-@@ -396,6 +396,14 @@ gl_inet_board_detect() {
- 	esac
- }
- 
-+tplink_pharos_v2_get_model_string() {
-+	local part
-+	part=$(find_mtd_part 'product-info')
-+	[ -z "$part" ] && return 1
-+
-+	dd if=$part bs=1 skip=4360 count=64 2>/dev/null | tr -d '\r\0' | head -n 1
-+}
-+
- ar71xx_board_detect() {
- 	local machine
- 	local name
-@@ -546,11 +554,15 @@ ar71xx_board_detect() {
- 		;;
- 	*"CPE210/220")
- 		name="cpe210"
--		tplink_pharos_board_detect
-+		tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
-+		;;
-+	*"CPE210 v2")
-+		name="cpe210-v2"
-+		tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)"
- 		;;
- 	*"CPE510/520")
- 		name="cpe510"
--		tplink_pharos_board_detect
-+		tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
- 		;;
- 	*CPE830)
- 		name="cpe830"
-@@ -560,11 +572,11 @@ ar71xx_board_detect() {
- 		;;
- 	*WBS210)
- 		name="wbs210"
--		tplink_pharos_board_detect
-+		tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
- 		;;
- 	*WBS510)
- 		name="wbs510"
--		tplink_pharos_board_detect
-+		tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
- 		;;
- 	*CR3000)
- 		name="cr3000"
-@@ -641,7 +653,7 @@ ar71xx_board_detect() {
- 		;;
- 	*"EAP120")
- 		name="eap120"
--		tplink_pharos_board_detect
-+		tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
- 		;;
- 	*"EAP300 v2")
- 		name="eap300v2"
-diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-index 0b422d71c2639a31bc7e88a20976266b66ec4490..9bc49c41a6308b732e45a7ae35c851133c367254 100755
---- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
-@@ -97,10 +97,11 @@ tplink_pharos_check_support_list() {
- 	local image="$1"
- 	local offset="$2"
- 	local model="$3"
-+	local trargs="$4"
- 
- 	# Here $image is given to dd directly instead of using get_image;
- 	# otherwise the skip will take almost a second (as dd can't seek)
--	dd if="$image" bs=1 skip=$offset count=1024 2>/dev/null | (
-+	dd if="$image" bs=1 skip=$offset count=1024 2>/dev/null | tr -d "$trargs" | (
- 		while IFS= read -r line; do
- 			[ "$line" = "$model" ] && exit 0
- 		done
-@@ -110,17 +111,19 @@ tplink_pharos_check_support_list() {
- }
- 
- tplink_pharos_check_image() {
--	local magic_long="$(get_magic_long "$1")"
--	[ "$magic_long" != "7f454c46" ] && {
--		echo "Invalid image magic '$magic_long'"
-+	local image_magic="$(get_magic_long "$1")"
-+	local board_magic="$2"
-+	[ "$image_magic" != "$board_magic" ] && {
-+		echo "Invalid image magic '$image_magic'. Expected '$board_magic'."
- 		return 1
- 	}
- 
--	local model_string="$(tplink_pharos_get_model_string)"
-+	local model_string="$3"
-+	local trargs="$4"
- 
- 	# New images have the support list at 7802888, old ones at 1511432
--	tplink_pharos_check_support_list "$1" 7802888 "$model_string" || \
--	tplink_pharos_check_support_list "$1" 1511432 "$model_string" || {
-+	tplink_pharos_check_support_list "$1" 7802888 "$model_string" "$trargs" || \
-+	tplink_pharos_check_support_list "$1" 1511432 "$model_string" "$trargs" || {
- 		echo "Unsupported image (model not in support-list)"
- 		return 1
- 	}
-@@ -507,7 +510,11 @@ platform_check_image() {
- 	eap120|\
- 	wbs210|\
- 	wbs510)
--		tplink_pharos_check_image "$1" && return 0
-+		tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_get_model_string)" '' && return 0
-+		return 1
-+		;;
-+	cpe210-v2)
-+		tplink_pharos_check_image "$1" "01000000" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0
- 		return 1
- 		;;
- 	a40|\

patches/lede/0100-ar71xx-Add-support-for-TP-Link-CPE210-v2.patch

-From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-Date: Fri, 19 Jan 2018 14:45:42 +0100
-Subject: ar71xx: Add support for TP-Link CPE210 v2
-
-This PR adds support for a popular low-cost 2.4GHz N based AP
-
-Specifications:
- - SoC: Qualcomm Atheros QCA9533 (650MHz)
- - RAM: 64MB
- - Storage: 8 MB SPI NOR
- - Wireless: 2.4GHz N based built into SoC 2x2
- - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN
-
-Installation:
-Flash factory image through stock firmware WEB UI
-or through TFTP
-To get to TFTP recovery just hold reset button while powering on for
-around 4-5 seconds and release.
-Rename factory image to recovery.bin
-Stock TFTP server IP:192.168.0.100
-Stock device TFTP adress:192.168.0.254
-
-Notes:
-TP-Link does not use bootstrap registers so without this patch reference
-clock detects as 40MHz while it is actually 25MHz.
-This is due to messed up bootstrap resistor configuration on the PCB.
-Provided GPL code just forces 25MHz reference clock.
-That causes booting with completely wrong clocks, for example, CPU tries
-to boot at 1040MHz while the stock is 650MHz.
-So this PR depends on PR #672 to remove 40MHz reference clock.
-Thanks to Sven Eckelmann <sven@narfation.org> for properly patching that.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-
-Origin: backport, https://github.com/openwrt/openwrt/commit/5c5bf8b8658a588423f6ec445d7ef6a36f99a396
-
-diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-index a742854bc9b0aa48c61b37e58288177bbb56d14d..54046dffc9a4d4ad0216dcda32bf98ee5d38b569 100755
---- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
-+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
-@@ -187,16 +187,25 @@ cf-e530n)
- 	ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
- 	;;
- cpe210|\
-+cpe210-v2|\
- cpe510|\
- wbs210|\
- wbs510)
--	ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
--	ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
- 	ucidef_set_rssimon "wlan0" "200000" "1"
- 	ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
- 	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
- 	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
- 	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
-+
-+	case "$board" in
-+	cpe210-v2)
-+		ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0" "eth0"
-+		;;
-+	*)
-+		ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
-+		ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
-+		;;
-+	esac
- 	;;
- cr3000)
- 	ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1"
-diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
-index 875a1a38ada9fb66503505d2f094310db1295a07..633d4e1b7415983f44164187ad3696311ec25621 100755
---- a/target/linux/ar71xx/base-files/etc/board.d/02_network
-+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
-@@ -67,6 +67,7 @@ ar71xx_setup_interfaces()
- 	cap4200ag|\
- 	cf-e380ac-v1|\
- 	cf-e380ac-v2|\
-+	cpe210-v2|\
- 	eap120|\
- 	eap300v2|\
- 	eap7660d|\
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
-index 2449a8d6bce17f0a703d8fc4f82dd38e1f861ae3..35532d86ac3ad32630592c79477c79783af4addb 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
-@@ -1301,6 +1301,7 @@ config ATH79_MACH_ARCHER_C7
- config ATH79_MACH_CPE510
- 	bool "TP-LINK CPE510 support"
- 	select SOC_AR934X
-+	select SOC_QCA953X
- 	select ATH79_DEV_ETH
- 	select ATH79_DEV_GPIO_BUTTONS
- 	select ATH79_DEV_LEDS_GPIO
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
-index d2dbed1fe286c44d3188262e984253faaee7edba..ceb1769ddd522d51014228fe65e2662f2f3e627c 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
-@@ -1,7 +1,8 @@
- /*
-- *  TP-LINK CPE210/220/510/520 board support
-+ *  TP-LINK CPE210/210 v2/220/510/520 board support
-  *
-  *  Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
-+ *  Copyright (C) 2017 Robert Marko <robimarko@gmail.com>
-  *
-  *  This program is free software; you can redistribute it and/or modify it
-  *  under the terms of the GNU General Public License version 2 as published
-@@ -41,6 +42,8 @@
- #define CPE510_KEYS_POLL_INTERVAL	20 /* msecs */
- #define CPE510_KEYS_DEBOUNCE_INTERVAL	(3 * CPE510_KEYS_POLL_INTERVAL)
- 
-+/* CPE210 v2 reset GPIO */
-+#define CPE210_V2_GPIO_BTN_RESET	17
- 
- static struct gpio_led cpe510_leds_gpio[] __initdata = {
- 	{
-@@ -98,6 +101,30 @@ static struct gpio_led wbs510_leds_gpio[] __initdata = {
- 	},
- };
- 
-+static struct gpio_led cpe210_v2_leds_gpio[] __initdata = {
-+	{
-+		.name		= "tp-link:green:lan0",
-+		.gpio		= CPE510_GPIO_LED_LAN0,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "tp-link:green:link1",
-+		.gpio		= CPE510_GPIO_LED_L1,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "tp-link:green:link2",
-+		.gpio		= CPE510_GPIO_LED_L2,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "tp-link:green:link3",
-+		.gpio		= CPE510_GPIO_LED_L3,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "tp-link:green:link4",
-+		.gpio		= CPE510_GPIO_LED_L4,
-+		.active_low	= 1,
-+	},
-+};
-+
- static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
- 	{
- 		.desc		= "Reset button",
-@@ -109,6 +136,17 @@ static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
- 	}
- };
- 
-+static struct gpio_keys_button cpe210_v2_gpio_keys[] __initdata = {
-+	{
-+		.desc		= "Reset button",
-+		.type		= EV_KEY,
-+		.code		= KEY_RESTART,
-+		.debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL,
-+		.gpio		= CPE210_V2_GPIO_BTN_RESET,
-+		.active_low	= 1,
-+	}
-+};
-+
- static void __init cpe_setup(u8 *mac)
- {
- 	/* Disable JTAG, enabling GPIOs 0-3 */
-@@ -171,9 +209,33 @@ static void __init wbs_setup(void)
- 	ath79_register_wmac(ee, mac);
- }
- 
-+static void __init cpe210_v2_setup(void)
-+{
-+	u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
-+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe210_v2_leds_gpio),
-+				 cpe210_v2_leds_gpio);
-+	ath79_register_gpio_keys_polled(-1, CPE510_KEYS_POLL_INTERVAL,
-+					ARRAY_SIZE(cpe210_v2_gpio_keys),
-+					cpe210_v2_gpio_keys);
-+	ath79_register_m25p80(NULL);
-+	ath79_register_mdio(0, 0x0);
-+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-+	ath79_eth0_data.duplex = DUPLEX_FULL;
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-+	ath79_eth0_data.speed = SPEED_100;
-+	ath79_eth0_data.phy_mask = BIT(4);
-+	ath79_register_eth(0);
-+	ath79_register_wmac(ee, mac);
-+}
-+
- MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210", "TP-LINK CPE210/220",
- 	     cpe210_setup);
- 
-+MIPS_MACHINE(ATH79_MACH_CPE210_V2, "CPE210V2", "TP-LINK CPE210 v2",
-+	     cpe210_v2_setup);
-+
- MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520",
- 	     cpe510_setup);
- 
-diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-index a4c7f52fe94e17bc48bebfb460f12f3e5ac35afe..e7e7f94775a3122286dc39447f04b42f4863f313 100644
---- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
-@@ -64,7 +64,8 @@ enum ath79_mach_type {
- 	ATH79_MACH_CF_E380AC_V2,		/* COMFAST CF-E380AC v2 */
- 	ATH79_MACH_CF_E520N,			/* COMFAST CF-E520N */
- 	ATH79_MACH_CF_E530N,			/* COMFAST CF-E530N */
--	ATH79_MACH_CPE210,			/* TP-LINK CPE210 */
-+	ATH79_MACH_CPE210,			/* TP-LINK CPE210 v1 */
-+	ATH79_MACH_CPE210_V2,			/* TP-LINK CPE210 v2 */
- 	ATH79_MACH_CPE510,			/* TP-LINK CPE510 */
- 	ATH79_MACH_CPE830,			/* YunCore CPE830 */
- 	ATH79_MACH_CPE870,			/* YunCore CPE870 */
-diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
-index 6a3faef518ebfa4f36d3074ee9c102b801e04275..b61ef6dc78918dd8d040c0f2bfb6451e5e13ba92 100644
---- a/target/linux/ar71xx/image/tp-link.mk
-+++ b/target/linux/ar71xx/image/tp-link.mk
-@@ -164,22 +164,26 @@ define Device/archer-c60-v1
- endef
- TARGET_DEVICES += archer-c60-v1
- 
--define Device/cpe510-520
--  DEVICE_TITLE := TP-LINK CPE510/520
-+define Device/cpexxx
-   DEVICE_PACKAGES := rssileds
-   MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,1792k(kernel),5888k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
-   IMAGE_SIZE := 7680k
--  BOARDNAME := CPE510
--  TPLINK_BOARD_NAME := CPE510
-   DEVICE_PROFILE := CPE510
-   LOADER_TYPE := elf
-+  IMAGES := sysupgrade.bin factory.bin
-+  IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
-+  IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
-+endef
-+
-+define Device/cpe510-520
-+  $(Device/cpexxx)
-+  DEVICE_TITLE := TP-LINK CPE510/520 v1
-+  BOARDNAME := CPE510
-+  TPLINK_BOARD_NAME := CPE510
-   LOADER_FLASH_OFFS := 0x43000
-   COMPILE := loader-$(1).elf
-   COMPILE/loader-$(1).elf := loader-okli-compile
-   KERNEL := kernel-bin | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 12288
--  IMAGES := sysupgrade.bin factory.bin
--  IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
--  IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
- endef
- 
- define Device/cpe210-220
-@@ -190,6 +194,19 @@ $(Device/cpe510-520)
-   TPLINK_BOARD_NAME := CPE210
- endef
- 
-+define Device/cpe210-v2
-+  $(Device/cpexxx)
-+  DEVICE_TITLE := TP-LINK CPE210 v2
-+  BOARDNAME := CPE210V2
-+  TPLINK_BOARD_NAME := CPE210V2
-+  KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-combined
-+  TPLINK_HWID := 0x0
-+  TPLINK_HWREV := 0
-+  TPLINK_HEADER_VERSION := 1
-+  TPLINK_FLASHLAYOUT := 8Mlzma
-+endef
-+TARGET_DEVICES += cpe210-v2
-+
- define Device/wbs210
- $(Device/cpe510-520)
-   DEVICE_TITLE := TP-LINK WBS210
-diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
-index 23b69f3bd0eb66aca650eb2ffd7d5cd2a7cb5194..e6ecc5b2c52c1627c8b998fa731b50ed39649f96 100644
---- a/tools/firmware-utils/src/tplink-safeloader.c
-+++ b/tools/firmware-utils/src/tplink-safeloader.c
-@@ -154,6 +154,48 @@ static struct device_info boards[] = {
- 		.last_sysupgrade_partition = "support-list",
- 	},
- 
-+	/** Firmware layout for the CPE210 V2 */
-+	{
-+		.id     = "CPE210V2",
-+		.vendor = "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
-+		.support_list =
-+			"SupportList:\r\n"
-+			"CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
-+			"CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
-+			"CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
-+			"CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
-+			"CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
-+			"CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
-+			"CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
-+			"CPE210(TP-LINK|UN|N300-2):2.0\r\n"
-+			"CPE210(TP-LINK|EU|N300-2):2.0\r\n"
-+			"CPE210(TP-LINK|US|N300-2):2.0\r\n",
-+		.support_trail = '\xff',
-+		.soft_ver = NULL,
-+
-+		.partitions = {
-+			{"fs-uboot", 0x00000, 0x20000},
-+			{"partition-table", 0x20000, 0x02000},
-+			{"default-mac", 0x30000, 0x00020},
-+			{"product-info", 0x31100, 0x00100},
-+			{"device-info", 0x31400, 0x00400},
-+			{"signature", 0x32000, 0x00400},
-+			{"device-id", 0x33000, 0x00100},
-+			{"os-image", 0x40000, 0x1c0000},
-+			{"file-system", 0x200000, 0x5b0000},
-+			{"soft-version", 0x7b0000, 0x00100},
-+			{"support-list", 0x7b1000, 0x01000},
-+			{"user-config", 0x7c0000, 0x10000},
-+			{"default-config", 0x7d0000, 0x10000},
-+			{"log", 0x7e0000, 0x10000},
-+			{"radio", 0x7f0000, 0x10000},
-+			{NULL, 0, 0}
-+		},
-+
-+		.first_sysupgrade_partition = "os-image",
-+		.last_sysupgrade_partition = "support-list",
-+	},
-+
- 	/** Firmware layout for the CPE510/520 */
- 	{
- 		.id	= "CPE510",