Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found
Select Git revision
  • 0x4A6F-master
  • 0x4A6F-rpi4
  • autinerd/experimental-openwrt-24.10
  • experimental
  • feature/addMikrotikwAP
  • master
  • nrb/airmax-test
  • nrb/ar9344-reset-sequence
  • nrb/ex400-remove-wps
  • nrb/gluon-master-cpe510
  • nrb/test-radv-filter
  • nrbffs/fastd-remove-delay
  • nrbffs/netgear-ex6120
  • v2018.2.2-ffs
  • v2018.2.3-ffs
  • v2019.1-ffs
  • v2019.1.1-ffs
  • v2019.1.2-ffs
  • v2020.1-ffs
  • v2020.1.1-ffs
  • v2020.1.3-ffs
  • v2020.2-ffs
  • v2020.2.1-ffs
  • v2020.2.2-ffs
  • v2020.2.3-ffs
  • v2021.1-ffs
  • v2021.1.1-ffs
  • v2021.1.2-ffs
  • v2022.1.1-ffs
  • v2022.1.3-ffs
  • v2022.1.4-ffs
  • v2023.1-ffs
  • v2023.2-ffs
  • v2023.2.2-ffs
  • v2023.2.3-ffs
  • v2023.2.4-ffs
  • v2023.2.5-ffs
  • experimental-2022-09-24
  • experimental-2022-09-24-base
  • experimental-2023-03-11
  • experimental-2023-03-11-base
  • experimental-2023-03-12
  • experimental-2023-03-12-base
  • experimental-2023-03-16
  • experimental-2023-03-16-base
  • experimental-2023-03-20
  • experimental-2023-03-20-base
  • experimental-2023-03-23
  • experimental-2023-03-23-base
  • experimental-2023-03-25
  • experimental-2023-03-25-base
  • experimental-2023-03-26
  • experimental-2023-03-26-base
  • experimental-2023-03-30
  • experimental-2023-03-30-base
  • experimental-2023-03-31
  • experimental-2023-03-31-base
  • experimental-2023-04-01
  • experimental-2023-04-01-base
  • experimental-2023-04-08
  • experimental-2023-04-08-base
  • experimental-2023-04-10
  • experimental-2023-04-10-base
  • experimental-2023-04-13
  • experimental-2023-04-13-base
  • experimental-2023-04-15
  • experimental-2023-04-15-base
  • experimental-2023-04-16
  • experimental-2023-04-16-base
  • experimental-2023-04-18
  • experimental-2023-04-18-base
  • experimental-2023-04-20
  • experimental-2023-04-20-base
  • experimental-2023-04-26
  • experimental-2023-04-26-base
  • experimental-2023-04-28
  • experimental-2023-04-28-base
  • experimental-2023-04-30
  • experimental-2023-04-30-base
  • experimental-2023-05-02
  • experimental-2023-05-02-base
  • experimental-2023-05-03
  • experimental-2023-05-03-base
  • experimental-2023-05-12
  • experimental-2023-05-12-base
  • experimental-2023-05-21
  • experimental-2023-05-21-base
  • experimental-2023-05-25
  • experimental-2023-05-25-base
  • experimental-2023-07-02
  • experimental-2023-07-02-base
  • experimental-2023-07-04
  • experimental-2023-07-04-base
  • experimental-2023-07-12
  • experimental-2023-07-12-base
  • experimental-2023-07-16
  • experimental-2023-07-16-base
  • experimental-2023-08-04
  • experimental-2023-08-04-base
  • experimental-2023-08-10
  • experimental-2023-08-10-base
  • experimental-2023-09-08
  • experimental-2023-09-08-base
  • experimental-2023-09-09
  • experimental-2023-09-09-base
  • experimental-2023-09-10
  • experimental-2023-09-10-base
  • experimental-2023-09-11
  • experimental-2023-09-11-base
  • experimental-2023-09-12
  • experimental-2023-09-12-base
  • experimental-2023-09-13
  • experimental-2023-09-13-base
  • experimental-2023-09-15
  • experimental-2023-09-15-base
  • experimental-2023-09-16
  • experimental-2023-09-16-base
  • experimental-2023-09-18
  • experimental-2023-09-18-base
  • experimental-2023-09-20
  • experimental-2023-09-20-base
  • experimental-2023-09-27
  • experimental-2023-09-27-base
  • experimental-2023-09-28
  • experimental-2023-09-28-base
  • experimental-2023-09-29
  • experimental-2023-09-29-base
  • experimental-2023-10-02
  • experimental-2023-10-02-base
  • experimental-2023-10-13
  • experimental-2023-10-13-base
  • experimental-2023-10-14
  • experimental-2023-10-14-base
  • experimental-2023-10-16
  • experimental-2023-10-16-base
  • experimental-2023-10-23
  • experimental-2023-10-23-base
137 results

Target

Select target project
  • firmware/gluon
  • 0x4A6F/gluon
  • patrick/gluon
3 results
Select Git revision
  • 0x4A6F-master
  • 0x4A6F-rpi4
  • 2014.3.x
  • 2014.4.x
  • babel
  • hoodselector
  • master
  • radv-filterd
  • v2015.1.x
  • v2016.1.x
  • v2016.2.4-batmanbug
  • v2016.2.x
  • v2018.2.2-ffs
  • v2018.2.x
  • v2014.1
  • v2014.2
  • v2014.3
  • v2014.3.1
  • v2014.4
  • v2015.1
  • v2015.1.1
  • v2015.1.2
  • v2016.1
  • v2016.1.1
  • v2016.1.2
  • v2016.1.3
  • v2016.1.4
  • v2016.1.5
  • v2016.1.6
  • v2016.2
  • v2016.2.1
  • v2016.2.2
  • v2016.2.3
  • v2016.2.4
  • v2016.2.5
  • v2016.2.6
  • v2016.2.7
  • v2017.1
  • v2017.1.1
  • v2017.1.2
  • v2017.1.3
  • v2017.1.4
  • v2017.1.5
  • v2017.1.6
  • v2017.1.7
  • v2017.1.8
  • v2018.1
  • v2018.1.1
  • v2018.1.2
  • v2018.1.3
  • v2018.1.4
  • v2018.2
  • v2018.2-ffs0.1
  • v2018.2.1
  • v2018.2.1-ffs0.1
  • v2018.2.2-ffs0.1
56 results
Show changes
From: Andreas Ziegler <github@andreas-ziegler.de>
Date: Sun, 6 Aug 2017 16:27:53 +0200
Subject: ar71xx: add uImageArcher to tp-link.mk
backport from e39dc8d823c86559eedbbdcee5f5c14b827fed0f
ar71xx: add support to TP-Link Archer C59v1 and C60v1
Based-on-patch-by: Henryk Heisig <hyniu@o2.pl>
Signed-off-by: Andreas Ziegler <github@andreas-ziegler.de>
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index b76ed02ca394fc1a8b15218d64b5dc722552bbfd..9cd6c6372ac8f7e509a0a2422616097c1c19edf6 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -45,6 +45,14 @@ define Build/mktplinkfw-kernel
@mv $@.new $@
endef
+define Build/uImageArcher
+ mkimage -A $(LINUX_KARCH) \
+ -O linux -T kernel \
+ -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
+ -n '$(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
+ @mv $@.new $@
+endef
+
define Device/tplink
TPLINK_HWREV := 0x1
TPLINK_HEADER_VERSION := 1
From: Ludwig Thomeczek <ledesrc@wxorx.net>
Date: Sat, 22 Apr 2017 18:21:47 +0200
Subject: ar71xx: add support for TP-Link Archer C25 v1
The TP-Link Archer C25 is a low-cost dual-band router.
Specification:
- CPU: Atheros QCA9561 775 MHz
- RAM: 64 MB
- Flash: 8 MB
- Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887
- NET: 5x 10/100 Mbps Ethernet
Some LEDs are controlled by an additional 74HC595 chip.
Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
[minor code style fixes, boards alphabetical order fixes,
reworked commit message]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 833522f27b61ac2208c2862bc0f29f34dea5e701..e1efb561b33da4dcfcb82ee953cd888170476dfb 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -53,6 +53,15 @@ ap121f)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
+archer-c25-v1)
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
+ ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
+ ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
+ ;;
arduino-yun)
ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 6d8a5c3d0a86a627663dee6e2905e03d5dec99fb..cefb7413eac6ffc50e67f1eaf63def749314428b 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -122,6 +122,7 @@ ar71xx_setup_interfaces()
a60|\
alfa-ap96|\
alfa-nx|\
+ archer-c25-v1|\
dr344|\
gl-ar150|\
gl-ar300m|\
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index bc2fc2f774c4f2f0bbfa6e43d9b9a55e9b63153d..38cc5d7853c79f2a7800a387310a95abb3b4de1b 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -50,6 +50,7 @@ get_status_led() {
ap135-020)
status_led="ap135:green:status"
;;
+ archer-c25-v1|\
mr12|\
mr16|\
nbg6616|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index b3e23c9a8f8c56870ef36fb55ae52e6b5ea61134..68f90de802ddd18e09a1da39c0d56292eea9489c 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -92,6 +92,7 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
+ archer-c25-v1|\
tl-wdr6500-v2)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 170c6f01b4310c4d6c261e9ba97af8786b21c93b..fc7d862c2911e96f76622cbed23e99863814da63 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -463,6 +463,9 @@ ar71xx_board_detect() {
*AP90Q)
name="ap90q"
;;
+ *"Archer C25 v1")
+ name="archer-c25-v1"
+ ;;
*"Archer C5")
name="archer-c5"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 21ad2a617db2fe4ff5801aba3a7fae5ba103570a..e65f6e2f7594ba373fbc9a26620859b9005c8532 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -206,6 +206,7 @@ platform_check_image() {
ap121f|\
ap132|\
ap90q|\
+ archer-c25-v1|\
bullet-m|\
c-55|\
carambola2|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index a8622454b421c1c74a8a71134b53c50399114aa5..e10401d42ae06506f82f2f5538fbc7df79fd4c65 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -51,6 +51,7 @@ CONFIG_ATH79_MACH_AP152=y
# CONFIG_ATH79_MACH_AP81 is not set
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_ARCHER_C25_V1=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 58d7e435362e0bac105e8183206e593329e4ae96..fb2afb965c4641df7cdcaf0920f2d56b3717fa9b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1234,6 +1234,16 @@ config ATH79_MACH_BSB
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C25_V1
+ bool "TP-LINK Archer C25 v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C7
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
select SOC_QCA955X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 7aee76019552e14ebdbf7bea357859dedb1a5bbb..3365a43ce16fc77b3212b39b92081efe678e8803 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
new file mode 100644
index 0000000000000000000000000000000000000000..a0f001cb49af5aa501c6825c40f3a98ab99503b2
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
@@ -0,0 +1,227 @@
+/*
+ * TP-Link Archer C25 v1 board support
+ *
+ * Copyright (C) 2017 Ludwig Thomeczek <ledesrc@wxorx.net>
+ * based on mach-archer-c60/C59-v1.c
+ * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#define ARCHER_C25_GPIO_SHIFT_OE 21 /* OE, Output Enable */
+#define ARCHER_C25_GPIO_SHIFT_SER 14 /* DS, Data Serial Input */
+#define ARCHER_C25_GPIO_SHIFT_SRCLK 15 /* SHCP, Shift Reg Clock Input */
+#define ARCHER_C25_GPIO_SHIFT_SRCLR 19 /* MR, Master Reset */
+#define ARCHER_C25_GPIO_SHIFT_RCLK 16 /* STCP, Storage Reg Clock Input */
+
+#define ARCHER_C25_74HC_GPIO_BASE QCA956X_GPIO_COUNT
+#define ARCHER_C25_74HC_GPIO_LED_WAN_AMBER 27
+#define ARCHER_C25_74HC_GPIO_LED_WAN_GREEN 28
+#define ARCHER_C25_74HC_GPIO_LED_WLAN2 29
+#define ARCHER_C25_74HC_GPIO_LED_WLAN5 30
+#define ARCHER_C25_74HC_GPIO_LED_LAN1 23
+#define ARCHER_C25_74HC_GPIO_LED_LAN2 24
+#define ARCHER_C25_74HC_GPIO_LED_LAN3 25
+#define ARCHER_C25_74HC_GPIO_LED_LAN4 26
+
+#define ARCHER_C25_V1_SSR_BIT_0 0
+#define ARCHER_C25_V1_SSR_BIT_1 1
+#define ARCHER_C25_V1_SSR_BIT_2 2
+#define ARCHER_C25_V1_SSR_BIT_3 3
+#define ARCHER_C25_V1_SSR_BIT_4 4
+#define ARCHER_C25_V1_SSR_BIT_5 5
+#define ARCHER_C25_V1_SSR_BIT_6 6
+#define ARCHER_C25_V1_SSR_BIT_7 7
+
+
+#define ARCHER_C25_V1_KEYS_POLL_INTERVAL 20
+#define ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL \
+ (3 * ARCHER_C25_V1_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C25_V1_GPIO_BTN_RESET 1
+#define ARCHER_C25_V1_GPIO_BTN_RFKILL 22
+
+#define ARCHER_C25_V1_GPIO_LED_POWER 17
+#define ARCHER_C25_V1_GPIO_LED_WPS 2
+
+#define ARCHER_C25_V1_WMAC_CALDATA_OFFSET 0x1000
+
+static struct spi_gpio_platform_data archer_c25_v1_spi_data = {
+ .sck = ARCHER_C25_GPIO_SHIFT_SRCLK,
+ .miso = SPI_GPIO_NO_MISO,
+ .mosi = ARCHER_C25_GPIO_SHIFT_SER,
+ .num_chipselect = 1,
+};
+
+static u8 archer_c25_v1_ssr_initdata[] __initdata = {
+ BIT(ARCHER_C25_V1_SSR_BIT_7) |
+ BIT(ARCHER_C25_V1_SSR_BIT_6) |
+ BIT(ARCHER_C25_V1_SSR_BIT_5) |
+ BIT(ARCHER_C25_V1_SSR_BIT_4) |
+ BIT(ARCHER_C25_V1_SSR_BIT_3) |
+ BIT(ARCHER_C25_V1_SSR_BIT_2) |
+ BIT(ARCHER_C25_V1_SSR_BIT_1)
+};
+
+static struct gen_74x164_chip_platform_data archer_c25_v1_ssr_data = {
+ .base = ARCHER_C25_74HC_GPIO_BASE,
+ .num_registers = ARRAY_SIZE(archer_c25_v1_ssr_initdata),
+ .init_data = archer_c25_v1_ssr_initdata,
+};
+
+static struct platform_device archer_c25_v1_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &archer_c25_v1_spi_data,
+ },
+};
+
+static struct spi_board_info archer_c25_v1_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 10000000,
+ .modalias = "74x164",
+ .platform_data = &archer_c25_v1_ssr_data,
+ .controller_data = (void *) ARCHER_C25_GPIO_SHIFT_RCLK,
+ },
+};
+
+static struct gpio_led archer_c25_v1_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c25-v1:green:power",
+ .gpio = ARCHER_C25_V1_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wps",
+ .gpio = ARCHER_C25_V1_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wlan2g",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN2,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wlan5g",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN5,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan1",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan2",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan3",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:lan4",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:green:wan",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "archer-c25-v1:amber:wan",
+ .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c25_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C25_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C25_V1_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static void __init archer_c25_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0008);
+ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
+
+ ath79_register_m25p80(NULL);
+
+ spi_register_board_info(archer_c25_v1_spi_info,
+ ARRAY_SIZE(archer_c25_v1_spi_info));
+
+ platform_device_register(&archer_c25_v1_spi_device);
+
+ gpio_request_one(ARCHER_C25_GPIO_SHIFT_OE,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "LED control");
+
+ gpio_request_one(ARCHER_C25_GPIO_SHIFT_SRCLR,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "LED reset");
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c25_v1_leds_gpio),
+ archer_c25_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C25_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c25_v1_gpio_keys),
+ archer_c25_v1_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + ARCHER_C25_V1_WMAC_CALDATA_OFFSET, mac);
+ ap91_pci_init(NULL, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C25_V1, "ARCHER-C25-V1", "TP-LINK Archer C25 v1",
+ archer_c25_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index a12685cd11a7a6cefe9b69991a5e41db55ccea85..8864e0deda57b926e88dceebd26056a2f8099380 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -40,6 +40,7 @@ enum ath79_mach_type {
ATH79_MACH_AP152, /* Atheros AP152 reference board */
ATH79_MACH_AP90Q, /* YunCore AP90Q */
ATH79_MACH_AP96, /* Atheros AP96 */
+ ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 9cd6c6372ac8f7e509a0a2422616097c1c19edf6..6933654e575a1ef2c92e4c656696a479cba4c594 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -103,6 +103,22 @@ $(Device/tplink)
IMAGE_SIZE := 15872k
endef
+define Device/archer-c25-v1
+ DEVICE_TITLE := TP-LINK Archer C25 v1
+ DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9887
+ BOARDNAME := ARCHER-C25-V1
+ TPLINK_BOARD_NAME := ARCHER-C25-V1
+ DEVICE_PROFILE := ARCHERC25V1
+ IMAGE_SIZE := 7808k
+ LOADER_TYPE := elf
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128k(config)ro,64k(art)ro,7808k@0x30000(firmware)
+endef
+TARGET_DEVICES += archer-c25-v1
+
define Device/cpe510-520
DEVICE_TITLE := TP-LINK CPE510/520
DEVICE_PACKAGES := rssileds
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index f8d255fd87b8c53511b34b42f4117422218219fe..376835a703f91532300d0dd7c8ef66704acc6e05 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -16,6 +16,7 @@
# CONFIG_ATH79_MACH_AP152 is not set
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index c1b5e61c3e9e5f02979584f72621f5e54cde2e36..62be218e33cc6366ea89f363983f36523c419650 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -9,6 +9,7 @@
# CONFIG_ATH79_MACH_AP136 is not set
# CONFIG_ATH79_MACH_AP147 is not set
# CONFIG_ATH79_MACH_AP96 is not set
+# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
# CONFIG_ATH79_MACH_CAP324 is not set