Skip to content
Snippets Groups Projects
Commit 966f3987 authored by David Bauer's avatar David Bauer Committed by Martin Weinelt
Browse files

modules: switch to OpenWrt 19.07

parent 3522197f
No related branches found
No related tags found
No related merge requests found
Show whitespace changes
Inline Side-by-side
patches/openwrt/0023-ar71xx-Add-support-for-TP-Link-CPE210-v3.patch deleted 100644 → 0
+ 0
− 141
View file @ 3522197f
From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Wed, 10 Oct 2018 20:13:09 +0200
Subject: ar71xx: Add support for TP-Link CPE210 v3
Looks identical to the v2
This PR adds support for a popular low-cost 2.4GHz N based AP
Specifications:
- SoC: Qualcomm Atheros QCA9533 (650MHz)
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 2.4GHz N based built into SoC 2x2
- Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN
Installation:
Flash factory image through stock firmware WEB UI or
through TFTP
To get to TFTP recovery just hold reset button while
powering on for around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
Signed-off-by: Robert Marko <robimarko@gmail.com>
[Adjusted for separate safeloader entry, do not inherit device
definition from cpe210-v2]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 23f3d23bf53883fb08944bc65b98cac06a16c0a5..e0222f3637b60b89a6ef6c0d10cfb20fbe73f075 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -249,6 +249,7 @@ cf-e530n)
;;
cpe210|\
cpe210-v2|\
+cpe210-v3|\
cpe510|\
wbs210|\
wbs510)
@@ -259,7 +260,8 @@ wbs510)
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
case "$board" in
- cpe210-v2)
+ cpe210-v2|\
+ cpe210-v3)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0" "eth0"
;;
*)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index e9522252a2b8ba7de1c8ca7d070ff7f2897aade9..386d93e58451b953937320b1bfe8d71ed73c69fd 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -75,6 +75,7 @@ ar71xx_setup_interfaces()
cf-e380ac-v1|\
cf-e380ac-v2|\
cpe210-v2|\
+ cpe210-v3|\
dr342|\
eap120|\
eap300v2|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index ccbd4e77c324a36e7fba6e6dccad59d8f94a3921..2200069c647b33220126e797b6a61928d1fb428e 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -583,6 +583,10 @@ ar71xx_board_detect() {
name="cpe210-v2"
tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)"
;;
+ *"CPE210 v3")
+ name="cpe210-v3"
+ tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)"
+ ;;
*"CPE505N")
name="cpe505n"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index ca1270b7fdc84c53f8417c226f18ca4fff1f27d8..a04dd7441d28e9db4dc7c744707bb5f35936da00 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -587,7 +587,8 @@ platform_check_image() {
tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_get_model_string)" '' && return 0
return 1
;;
- cpe210-v2)
+ cpe210-v2|\
+ cpe210-v3)
tplink_pharos_check_image "$1" "01000000" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0
return 1
;;
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
index ceb1769ddd522d51014228fe65e2662f2f3e627c..f25a69f08e8a69d9b6de0ca9d7d7d14f8dff5fa0 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
@@ -236,6 +236,9 @@ MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210", "TP-LINK CPE210/220",
MIPS_MACHINE(ATH79_MACH_CPE210_V2, "CPE210V2", "TP-LINK CPE210 v2",
cpe210_v2_setup);
+MIPS_MACHINE(ATH79_MACH_CPE210_V3, "CPE210V3", "TP-LINK CPE210 v3",
+ cpe210_v2_setup);
+
MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520",
cpe510_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 80f6e1d95b7a4e5559e7d5da041b32d962ad4e84..c82cb17cf613bdb3796a15e384215d4579767468 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -75,6 +75,7 @@ enum ath79_mach_type {
ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
ATH79_MACH_CPE210, /* TP-LINK CPE210 v1 */
ATH79_MACH_CPE210_V2, /* TP-LINK CPE210 v2 */
+ ATH79_MACH_CPE210_V3, /* TP-LINK CPE210 v3 */
ATH79_MACH_CPE505N, /* P&W CPE505N */
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_CPE830, /* YunCore CPE830 */
diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk
index daf6c35ae4610d844bd9e8f44ea5deab72143a48..8ad1f6e38228b639d1d127937ba875c030a6a632 100644
--- a/target/linux/ar71xx/image/generic-tp-link.mk
+++ b/target/linux/ar71xx/image/generic-tp-link.mk
@@ -195,6 +195,18 @@ define Device/cpe210-v2
endef
TARGET_DEVICES += cpe210-v2
+define Device/cpe210-v3
+ $(Device/cpexxx)
+ DEVICE_TITLE := TP-LINK CPE210 v3
+ BOARDNAME := CPE210V3
+ TPLINK_BOARD_ID := CPE210V3
+ KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
+ TPLINK_HWID := 0x0
+ TPLINK_HWREV := 0
+ TPLINK_HEADER_VERSION := 1
+endef
+TARGET_DEVICES += cpe210-v3
+
define Device/wbs210-v1
$(Device/cpe510-520-v1)
DEVICE_TITLE := TP-LINK WBS210 v1
patches/openwrt/0024-ramips-add-support-for-ASUS-RT-AC57U.patch deleted 100644 → 0
+ 0
− 292
View file @ 3522197f
From: David Bauer <mail@david-bauer.net>
Date: Sun, 23 Jun 2019 15:10:01 +0200
Subject: ramips: add support for ASUS RT-AC57U
SoC: MediaTek MT7621AT
RAM: 128M (Winbond W631GG6KB-15)
FLASH: 16MB (Spansion S25FL128SA)
WiFi: MediaTek MT7603EN bgn 2SS
WiFi: MediaTek MT7612EN nac 2SS
BTN: Reset - WPS
LED: - Power
- LAN {1-4}
- WAN
- WiFi 2.4 GHz
- WiFi 5 GHz
- USB
UART: UART is present next to the Power LED.
TX - RX - GND - 3V3 / 57600-8N1
3V3 is the nearest one to the Power LED.
Installation
------------
Via TFTP:
1. Set your computers IP-Address to 192.168.1.75.
2. Power up the Router with the Reset button pressed.
3. Release the Reset button after 5 seconds.
4. Upload OpenWRT sysupgrade image via TFTP:
> tftp -4 -v -m binary 192.168.1.1 -c put <IMAGE>
Via SSH:
Note: User/password for SSH is identical with the one used in the
Web-interface.
1. Complete the initial setup wizard.
2. Activate SSH under "Administration" -> "System".
3. Transfer the OpenWrt sysupgrade image via scp:
> scp owrt.bin admin@192.168.1.1:/tmp
4. Connect via SSH to the router.
> ssh admin@192.168.1.1
5. Write the OpenWrt image to flash.
> mtd-write -i /tmp/owrt.bin -d linux
6. Reboot the router
> reboot
Signed-off-by: David Bauer <mail@david-bauer.net>
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 9424c7ddfd64f9149a24ff91e63b71990265d211..7ceec7742aa7a0248ea3c31053b9adda2b247c9c 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -186,6 +186,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
;;
+ asus,rt-ac57u|\
atp-52b|\
awm002-evb-4M|\
awm002-evb-8M|\
@@ -413,6 +414,11 @@ ramips_setup_macs()
wmdr-143n)
lan_mac=$(cat /sys/class/net/eth0/address)
;;
+ asus,rt-ac57u|\
+ vr500)
+ lan_mac=$(mtd_get_mac_binary factory 57344)
+ wan_mac=$(mtd_get_mac_binary factory 57350)
+ ;;
all0239-3g|\
carambola|\
freestation5|\
@@ -541,10 +547,6 @@ ramips_setup_macs()
lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
wan_mac=$(mtd_get_mac_ascii u-boot-env WAN_MAC_ADDR)
;;
- vr500)
- lan_mac=$(mtd_get_mac_binary factory 57344)
- wan_mac=$(mtd_get_mac_binary factory 57350)
- ;;
w306r-v20)
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 5)
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 097cc6df569518f64dbfd641eeccc1a4b1b37a2b..16e482c3879ff727faea9ffde31da634004fee93 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -141,6 +141,7 @@ get_status_led() {
youhua,wr1200js)
status_led="$boardname:blue:wps"
;;
+ asus,rt-ac57u|\
d240|\
dap-1350|\
na930|\
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 7213b22d0c2734488bd96bc34e921f08649b8c2f..e4d813341b0e4d1ac804ee8cf0ec258e9c08fcd1 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -27,6 +27,7 @@ platform_check_image() {
ar725w|\
asl26555-8M|\
asl26555-16M|\
+ asus,rt-ac57u|\
awapn2403|\
awm002-evb-4M|\
awm002-evb-8M|\
diff --git a/target/linux/ramips/dts/RT-AC57U.dts b/target/linux/ramips/dts/RT-AC57U.dts
new file mode 100644
index 0000000000000000000000000000000000000000..cdab94676e13d259eb80afbcb28347d75d1f08f6
--- /dev/null
+++ b/target/linux/ramips/dts/RT-AC57U.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "asus,rt-ac57u", "mediatek,mt7621-soc";
+ model = "ASUS RT-AC57U";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "rt-ac57u:blue:power";
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "rt-ac57u:blue:usb";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ led-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "LED-Power";
+ gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ device_type = "pci";
+
+ led {
+ led-sources = <2>;
+ led-active-low;
+ };
+ };
+ };
+
+ pcie1 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ device_type = "pci";
+
+ led {
+ led-active-low;
+ };
+ };
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4e000>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "sdhci";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index c8de8bd5ff7d1bec4de5c4ffd84a589892871ecb..e0f8cc65ebbfc93b4bfd765db5e62b5afda27c40 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -49,6 +49,14 @@ define Device/11acnas
endef
TARGET_DEVICES += 11acnas
+define Device/asus_rt-ac57u
+ DTS := RT-AC57U
+ DEVICE_TITLE := ASUS RT-AC57U
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
+endef
+TARGET_DEVICES += asus_rt-ac57u
+
define Device/dir-860l-b1
DTS := DIR-860L-B1
BLOCKSIZE := 64k
diff --git a/target/linux/ramips/mt7621/config-4.14 b/target/linux/ramips/mt7621/config-4.14
index 2ea80a3ab0c174374fa8febc19031ff5a4dae4c3..0e060237802f2b1d6918f65894368934c225cb17 100644
--- a/target/linux/ramips/mt7621/config-4.14
+++ b/target/linux/ramips/mt7621/config-4.14
@@ -228,6 +228,8 @@ CONFIG_RCU_STALL_COMMON=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
patches/openwrt/0025-uboot-fritz4040-add-fixes-for-bootloader-image-generation.patch deleted 100644 → 0
+ 0
− 111
View file @ 3522197f
From: Matthias Schiffer <mschiffer@universe-factory.net>
Date: Sat, 20 Jul 2019 13:12:58 +0200
Subject: uboot-fritz4040: add fixes for bootloader image generation
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
diff --git a/package/boot/uboot-fritz4040/patches/200-fritzcreator-replace-obscure-padding-generation-with.patch b/package/boot/uboot-fritz4040/patches/200-fritzcreator-replace-obscure-padding-generation-with.patch
new file mode 100644
index 0000000000000000000000000000000000000000..44062b88048f483b618992c51b1dffdfe7ca511a
--- /dev/null
+++ b/package/boot/uboot-fritz4040/patches/200-fritzcreator-replace-obscure-padding-generation-with.patch
@@ -0,0 +1,63 @@
+From 9af24ea29494a279eba01d2b284c9c94d4fdb267 Mon Sep 17 00:00:00 2001
+Message-Id: <9af24ea29494a279eba01d2b284c9c94d4fdb267.1563619497.git.mschiffer@universe-factory.net>
+From: Matthias Schiffer <mschiffer@universe-factory.net>
+Date: Sat, 20 Jul 2019 12:35:01 +0200
+Subject: [PATCH 1/2] fritzcreator: replace obscure padding generation with
+ something more compatible
+
+It as reported that OpenWrt/Gluon would sometimes generate invalid
+bootloader images with insufficient for the FritzBox 4040, presumably
+depending on the distro version used on the build host.
+
+This commit tries to fix this by replacing the printf-based padding
+generation (that in one case relies on 65536 arguments being passed to the
+printf command) with a more compatible read from /dev/zero.
+
+[1] https://github.com/freifunk-gluon/gluon/issues/1766
+---
+ fritz/fritzcreator.sh | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/fritz/fritzcreator.sh b/fritz/fritzcreator.sh
+index 8ed0c08cc5ed..8ea412e5aca5 100755
+--- a/fritz/fritzcreator.sh
++++ b/fritz/fritzcreator.sh
+@@ -55,7 +55,7 @@ cat "$FRITZ_DTB" "$FRITZ_DTB" "$FRITZ_DTB" "$FRITZ_DTB" >> $UBOOT_FRITZ4040
+ rm -f "$FRITZ_DTB"
+
+ # Add 512 bytes of pad area
+-printf "%0.s\0" {1..512} >> $UBOOT_FRITZ4040
++dd if=/dev/zero bs=512 count=1 >> $UBOOT_FRITZ4040
+
+ # This table links to the individual DTBs for every HWSubRevision.
+ # A table entry consists of two 32-bit words.
+@@ -84,7 +84,7 @@ mv "$UBOOT_FRITZ4040.new" "$UBOOT_FRITZ4040"
+
+
+ # Add 64k bytes of pad area
+-printf "%0.s\0" {1..65536} >> $UBOOT_FRITZ4040
++dd if=/dev/zero bs=1024 count=64 >> $UBOOT_FRITZ4040
+
+ # Pack it with lzma
+ fritz/lzma e "$UBOOT_FRITZ4040" -lc1 -lp2 -pb2 "$UBOOT_FRITZ4040.new"
+@@ -99,7 +99,7 @@ fritz/lzma2eva $UBOOT_LOADADDR $UBOOT_LOADADDR "$UBOOT_FRITZ4040.new" "$UBOOT_FR
+ # The next bit. The hshqs partition should be aligned to 0x100
+ let size=$(stat -c%s "$UBOOT_FRITZ4040")
+ let "pad = 256 - ( $size % 256) % 256"
+-( printf "%0.s\377" {1..256} | dd conv=sync bs=$pad count=1 ) > $UBOOT_FRITZ4040.pad
++dd if=/dev/zero bs=$pad count=1 | tr '\0' '\377' > $UBOOT_FRITZ4040.pad
+
+ cat "$UBOOT_FRITZ4040" "$UBOOT_FRITZ4040.pad" > $UBOOT_FRITZ4040.new
+
+@@ -109,7 +109,7 @@ rm -f "$UBOOT_FRITZ4040.pad"
+
+ # Apparently, EVA checks for the SquashFS filesystem MAGIC too. Likely for the rootfs
+ # entry.
+-(cat "$UBOOT_FRITZ4040"; echo "hsqs"; printf "%0.s\0" {1..124} ) > $UBOOT_FRITZ4040.new
++(cat "$UBOOT_FRITZ4040"; echo "hsqs"; dd if=/dev/zero bs=124 count=1 ) > $UBOOT_FRITZ4040.new
+
+ # Make it so that this fits into 512k (Note: we have to add 8 Bytes for the final checksum
+ # so 524280 is 512k - 8.
+--
+2.22.0
+
diff --git a/package/boot/uboot-fritz4040/patches/201-fritzcreator-actually-add-checksum-spacer.patch b/package/boot/uboot-fritz4040/patches/201-fritzcreator-actually-add-checksum-spacer.patch
new file mode 100644
index 0000000000000000000000000000000000000000..f92060a23312a4961ddc75716fd06b9d6a106a1d
--- /dev/null
+++ b/package/boot/uboot-fritz4040/patches/201-fritzcreator-actually-add-checksum-spacer.patch
@@ -0,0 +1,30 @@
+From dd05d1bb619b372e4717a74da560450dd93d4c3b Mon Sep 17 00:00:00 2001
+Message-Id: <dd05d1bb619b372e4717a74da560450dd93d4c3b.1563619497.git.mschiffer@universe-factory.net>
+In-Reply-To: <9af24ea29494a279eba01d2b284c9c94d4fdb267.1563619497.git.mschiffer@universe-factory.net>
+References: <9af24ea29494a279eba01d2b284c9c94d4fdb267.1563619497.git.mschiffer@universe-factory.net>
+From: Matthias Schiffer <mschiffer@universe-factory.net>
+Date: Sat, 20 Jul 2019 12:43:48 +0200
+Subject: [PATCH 2/2] fritzcreator: actually add checksum spacer
+
+The spacer was written to $UBOOT_FRITZ4040.new, but this file was not used
+at all before it was overwritten again.
+---
+ fritz/fritzcreator.sh | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/fritz/fritzcreator.sh b/fritz/fritzcreator.sh
+index 8ea412e5aca5..ea5a50df1f87 100755
+--- a/fritz/fritzcreator.sh
++++ b/fritz/fritzcreator.sh
+@@ -94,7 +94,7 @@ fritz/lzma2eva $UBOOT_LOADADDR $UBOOT_LOADADDR "$UBOOT_FRITZ4040.new" "$UBOOT_FR
+
+ # The bootloader seems to add a TI checksum signature (8 Bytes) as part of the
+ # "check mtd1" command in the FTP prompt. To make this easier we add spacer here.
+-(cat "$UBOOT_FRITZ4040"; printf "\xff\xff\xff\xff\xff\xff\xff\xff" ) > $UBOOT_FRITZ4040.new
++printf "\xff\xff\xff\xff\xff\xff\xff\xff" >> $UBOOT_FRITZ4040
+
+ # The next bit. The hshqs partition should be aligned to 0x100
+ let size=$(stat -c%s "$UBOOT_FRITZ4040")
+--
+2.22.0
+
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Please register or to comment

Impressum - Datenschutz