diff --git a/patches/openwrt/0011-mediatek-filogic-add-support-for-Cudy-AP3000-Outdoor.patch b/patches/openwrt/0011-mediatek-filogic-add-support-for-Cudy-AP3000-Outdoor.patch
deleted file mode 100644
index 3324b8606d0b8611286f074866971809858217c1..0000000000000000000000000000000000000000
--- a/patches/openwrt/0011-mediatek-filogic-add-support-for-Cudy-AP3000-Outdoor.patch
+++ /dev/null
@@ -1,307 +0,0 @@
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 4 Aug 2024 22:47:47 +0200
-Subject: mediatek: filogic: add support for Cudy AP3000 Outdoor
-
-Hardware highlights:
- - MediaTek MT7981 WiSoC
- - 256MB DDR3 RAM
- - 64MB SPI-NAND
- - MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5)
- - 1x LED in two colors
- - 2x Button
- - 1x 1GbE
- - Two detachable antenas, two internal pcb antenas
- - PoE powered (standalone)
-
-MAC:
-LAN MAC: label mac
-2.4G MAC: label mac -1
-5G MAC: label mac
-
-How to install:
-1. Apply Cudy Intermediate OpenWrt image for AP3000 Outdoor V1
-2. Install OpenWrt sysupgrade image
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
-Link: https://github.com/openwrt/openwrt/pull/16156
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
-diff --git a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
-index 6dfa52c291146183c67bc4b1813b48cd9bf0d7dc..8e74c577cd505bbf8b2109d8f34fe8013887dc1e 100644
---- a/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
-+++ b/target/linux/mediatek/base-files/lib/preinit/05_set_preinit_iface
-@@ -6,6 +6,7 @@ set_preinit_iface() {
- ip link set eth1 up
- ifname=eth1
- ;;
-+ cudy,ap3000outdoor-v1|\
- cudy,re3000-v1|\
- ubnt,unifi-6-lr|\
- zyxel,nwa50ax-pro)
-diff --git a/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts
-new file mode 100644
-index 0000000000000000000000000000000000000000..62e406394755ac6ef5722e4070553a24261e88a7
---- /dev/null
-+++ b/target/linux/mediatek/dts/mt7981b-cudy-ap3000outdoor-v1.dts
-@@ -0,0 +1,209 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+
-+/dts-v1/;
-+
-+#include <dt-bindings/leds/common.h>
-+
-+#include "mt7981.dtsi"
-+
-+/ {
-+ model = "Cudy AP3000 Outdoor v1";
-+ compatible = "cudy,ap3000outdoor-v1", "mediatek,mt7981-spim-snand-rfb";
-+
-+ aliases {
-+ label-mac-device = &gmac1;
-+ led-boot = &led_status_green;
-+ led-failsafe = &led_status_red;
-+ led-running = &led_status_green;
-+ led-upgrade = &led_status_red;
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+
-+ reset {
-+ label = "reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led_status_green: led@0 {
-+ function = LED_FUNCTION_STATUS;
-+ color = <LED_COLOR_ID_GREEN>;
-+ gpios = <&pio 10 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ led_status_red: led_1 {
-+ function = LED_FUNCTION_POWER;
-+ color = <LED_COLOR_ID_RED>;
-+ gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+ gpio_export {
-+ compatible = "gpio-export";
-+ #size-cells = <0>;
-+
-+ antctrl {
-+ /* Not sure if this pin does anything.
-+ * It was taken from GPL sources.
-+ * Intermediate image doesn't have it.
-+ */
-+ gpio-export,name = "antctrl";
-+ gpio-export,output = <1>;
-+ gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ watchdog-hw {
-+ compatible = "linux,wdt-gpio";
-+ gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
-+ hw_algo = "level";
-+ hw_margin_ms = <10000>;
-+ always-running;
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&watchdog {
-+ status = "okay";
-+};
-+
-+ð {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mdio_pins>;
-+
-+ status = "okay";
-+
-+ gmac1: mac@1 {
-+ compatible = "mediatek,eth-mac";
-+ reg = <1>;
-+ phy-mode = "gmii";
-+ phy-handle = <&int_gbe_phy>;
-+ nvmem-cell-names = "mac-address";
-+ nvmem-cells = <&macaddr_bdinfo_de00 1>;
-+ };
-+};
-+
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi0_flash_pins>;
-+ status = "okay";
-+
-+ spi_nand: flash@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "spi-nand";
-+ reg = <0>;
-+ spi-max-frequency = <52000000>;
-+
-+ spi-cal-enable;
-+ spi-cal-mode = "read-data";
-+ spi-cal-datalen = <7>;
-+ spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
-+ spi-cal-addrlen = <5>;
-+ spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
-+
-+ spi-tx-bus-width = <4>;
-+ spi-rx-bus-width = <4>;
-+ mediatek,nmbm;
-+ mediatek,bmt-max-ratio = <1>;
-+ mediatek,bmt-max-reserved-blocks = <64>;
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "BL2";
-+ reg = <0x00000 0x0100000>;
-+ read-only;
-+ };
-+
-+ partition@100000 {
-+ label = "u-boot-env";
-+ reg = <0x0100000 0x0080000>;
-+ read-only;
-+ };
-+
-+ factory: partition@180000 {
-+ label = "Factory";
-+ reg = <0x180000 0x0200000>;
-+ read-only;
-+ nvmem-layout {
-+ compatible = "fixed-layout";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ eeprom_factory_0: eeprom@0 {
-+ reg = <0x0 0x1000>;
-+ };
-+ };
-+ };
-+
-+ partition@380000 {
-+ label = "bdinfo";
-+ reg = <0x380000 0x0040000>;
-+ read-only;
-+ nvmem-layout {
-+ compatible = "fixed-layout";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ macaddr_bdinfo_de00: macaddr@de00 {
-+ compatible = "mac-base";
-+ reg = <0xde00 0x6>;
-+ #nvmem-cell-cells = <1>;
-+ };
-+ };
-+
-+ };
-+
-+ partition@3C0000 {
-+ label = "FIP";
-+ reg = <0x3C0000 0x0200000>;
-+ read-only;
-+ };
-+
-+ partition@580000 {
-+ label = "ubi";
-+ reg = <0x5C0000 0x4000000>;
-+ compatible = "linux,ubi";
-+ };
-+ };
-+ };
-+};
-+
-+
-+&pio {
-+ spi0_flash_pins: spi0-pins {
-+ mux {
-+ function = "spi";
-+ groups = "spi0", "spi0_wp_hold";
-+ };
-+ };
-+};
-+
-+&wifi {
-+ status = "okay";
-+ nvmem-cells = <&eeprom_factory_0>;
-+ nvmem-cell-names = "eeprom";
-+};
-diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
-index e8ce84dd4b7648e35d6f67f3bfc0287c3c30c584..e61cbea700414326e88fda2c9d80101fee4500ae 100644
---- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
-+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
-@@ -70,6 +70,7 @@ mediatek_setup_interfaces()
- mercusys,mr90x-v1)
- ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
- ;;
-+ cudy,ap3000outdoor-v1|\
- cudy,re3000-v1|\
- netgear,wax220|\
- ubnt,unifi-6-plus|\
-diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
-index 053d8e09cdff1df9c49b824529062a0c17c5b7dd..515d341ff4cf57466e2869ad6faeb82ac0318ca6 100644
---- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
-+++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
-@@ -67,6 +67,7 @@ case "$board" in
- [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
- [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress
- ;;
-+ cudy,ap3000outdoor-v1|\
- cudy,m3000-v1|\
- cudy,wr3000-v1)
- addr=$(mtd_get_mac_binary bdinfo 0xde00)
-diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
-index 88b279140c4b500c4cf86b99b2332fca389c5a85..b8636ac90a3eb9d749b80d01babc9bafbd36b680 100644
---- a/target/linux/mediatek/image/filogic.mk
-+++ b/target/linux/mediatek/image/filogic.mk
-@@ -360,6 +360,23 @@ define Device/confiabits_mt7981
- endef
- TARGET_DEVICES += confiabits_mt7981
-
-+define Device/cudy_ap3000outdoor-v1
-+ DEVICE_VENDOR := Cudy
-+ DEVICE_MODEL := AP3000 Outdoor
-+ DEVICE_VARIANT := v1
-+ DEVICE_DTS := mt7981b-cudy-ap3000outdoor-v1
-+ DEVICE_DTS_DIR := ../dts
-+ SUPPORTED_DEVICES += R51
-+ UBINIZE_OPTS := -E 5
-+ BLOCKSIZE := 128k
-+ PAGESIZE := 2048
-+ IMAGE_SIZE := 65536k
-+ KERNEL_IN_UBI := 1
-+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-+ DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
-+endef
-+TARGET_DEVICES += cudy_ap3000outdoor-v1
-+
- define Device/cudy_m3000-v1
- DEVICE_VENDOR := Cudy
- DEVICE_MODEL := M3000
diff --git a/targets/mediatek-filogic b/targets/mediatek-filogic
index c61bc5fd5b22c0246d024805e99ef59164002f8e..9165148b937449cf5d6038f875beff2c40efab31 100644
--- a/targets/mediatek-filogic
+++ b/targets/mediatek-filogic
@@ -11,10 +11,6 @@ device('asus-tuf-ax6000', 'asus_tuf-ax6000', {
-- Cudy
-device('cudy-ap3000outdoor-v1', 'cudy_ap3000outdoor-v1', {
- factory = false,
-})
-
device('cudy-wr3000-v1', 'cudy_wr3000-v1', {
factory = false,
})