diff --git a/README.md b/README.md
index b953b6da696ae1cd29cdb39b19651fd280da0f46..89238d47ac38f70aaf59f81368a101b59363ac02 100644
--- a/README.md
+++ b/README.md
@@ -5,42 +5,37 @@ _This branch of the script contains the ssid-changer version for the gluon branc
 2018.1.x and 2018.2.x  (current "master"). For older releases of Gluon use the
 branches "2017.1.x" and "2016.2.x"._
 
-This package adds a script to change the SSID to an Offline-SSID when there is
+This package adds a script to change the SSID when there is
 no connection to any gateway.
-This SSID can be generated from the nodes hostname with the first
-and last part of the nodename or the mac address, to allow observers to 
-recognise which node is down. The script is called once a minute by micron.d
-and it will change from online to offline-SSID maximum once every (definable)
-timeframe.
+This Offline-SSID can be generated from the node's hostname with the first
+and last part of the node name or the MAC address allowing observers to 
+recognize which node does not have a connection to a gateway. This script is
+called once every minute by `micron.d` and check gateway-connectivity. It will change the SSID to the Offline-SSID after the node lost gateway connectivity for several consecutive checks. As soon as the gateway-connectivity is back it toggles back to the original SSID.
 
 You can enable/disable it in the config mode.
 
-Once every timeframe it checks if there's still a gateway reachable. There can be
-selected two algorithms to analyze if a gateway is reacheable:
+It checks if a gateway is reachable in an interval. Different algorithms can be
+selected to determine whether a gateway is reachable:
 
 - `tq_limit_enabled=true`: (not working with BATMAN_V) define an upper and lower
-  limit to turn the offline_ssid on and off in-between these two values the SSID
-  will never be changed to prevent it from toggeling every minute.
+  bound to toggle the SSID. As long as the TQ stays in-between those bounds the 
+  SSID will not be changed.
 - `tq_limit_enabled=false`: there will be only checked, if the gateway is
   reachable with:
 
         batctl gwl -H
 
-Depending on the connectivity, it will be decided if a change of the SSID is 
-necessary: There is a variable `switch_timeframe` (for ex.  1440 = 24h) that 
-defines a time interval after which a successful check that detects an offline
-state will result in a single change of the SSID to "FF_Offline_$node_hostname".
-Only the first few minutes (also definable in a variable `first`) the 
-OFFLINE_SSID may also be set. All other minutes a checks will just be counted
-and reported in the log and whenever an online state is detected the SSID will
-be set back immediately back to normal. when the timeframe is reached, there
-will be checked if the node was offline at least half the timeframe, only then
-the SSID will be changed.
+The SSID is always changed back to normal every minute as soon as the gateway-connectivity is back.
+
+The parameter `switch_timeframe` defines how long it will record the gateway-connectivity. **Only** if the gateway is not reachable during at least half the checks within `switch_timeframe` minutes,
+the SSID will be changed to "FF_Offline_$node_hostname".
+
+The parameter `first` defines a learning phase after reboot (in minutes) during which the SSID may be changed to the Offline-SSID **every minute**. 
 
 site.conf
 =========
 
-Adapt and add this block to your site.conf: 
+Adapt and add this block to your `site.conf`: 
 
 ```
 ssid_changer = {
@@ -48,13 +43,15 @@ ssid_changer = {
   switch_timeframe = 30,    -- only once every timeframe (in minutes) the SSID will change to the Offline-SSID 
                             -- set to 1440 to change once a day
                             -- set to 1 minute to change every time the router gets offline
-  first = 5,                -- the first few minutes directly after reboot within which an Offline-SSID always may be activated (must be <= switch_timeframe)
+  first = 5,                -- the first few minutes directly after reboot within which an Offline-SSID may be
+                            -- activated every minute (must be <= switch_timeframe)
   prefix = 'FF_Offline_',   -- use something short to leave space for the nodename (no '~' allowed!)
   suffix = 'nodename',      -- generate the SSID with either 'nodename', 'mac' or to use only the prefix: 'none'
   
   tq_limit_enabled = false, -- if false, the offline SSID will only be set if there is no gateway reacheable
                             -- upper and lower limit to turn the offline_ssid on and off
-                            -- in-between these two values the SSID will never be changed to prevent it from toggeling every minute.
+                            -- in-between these two values the SSID will never be changed to prevent it from
+                            -- toggeling every minute.
   tq_limit_max = 45,        -- upper limit, above that the online SSID will be used
   tq_limit_min = 35         -- lower limit, below that the offline SSID will be used
 },
@@ -126,7 +123,10 @@ History
 https://github.com/viisauksena/gluon-ssid-changer that doesn't check
 the tx value any more. It is now in use in*:
 
-- Freifunk Nord
+- Freifunk Aachen
+- Freifunk Frankfurt am Main
 - Freifunk Kiel
-- 
-
+- Freifunk Kreis Gütersloh
+- Freifunk Nord
+- Eulenfunk
+- Freifunk Vogtland