diff --git a/docs/features/wired-mesh.rst b/docs/features/wired-mesh.rst
index 2358e2760f99f8cd43c035944676daa9cf545ee2..efa1977ad408b4d4851dbdd4cf3b1ccd7b48daf6 100644
--- a/docs/features/wired-mesh.rst
+++ b/docs/features/wired-mesh.rst
@@ -1,5 +1,5 @@
 Wired mesh (Mesh-on-WAN/LAN)
-============================
+############################
 
 In addition to meshing over WLAN and VPN, it is also possible to
 configure wired meshing over the LAN or WAN ports. This allows
@@ -11,12 +11,41 @@ Enabling Mesh-on-WAN should be avoided if the local network is also bridged with
 a WLAN access point, as meshing over batman-adv causes large amounts of
 multicast traffic, which will take up a lot of airtime.
 
-Enabling Mesh-on-LAN will replace the normal "client network" function
+Enabling Mesh-on-LAN replaces the normal "client network" function
 of the LAN ports, as client network ports may never be connected (so care must be taken to always
 enable Mesh-on-LAN before connecting two nodes' LAN ports).
 
+Wired mesh encapsulation
+************************
+
+Since version 2018.1, Gluon supports encapsulating wired mesh traffic in
+`VXLAN <https://en.wikipedia.org/wiki/Virtual_Extensible_LAN>`_, a new standard with
+usecases similar to VLANs, but a much greater ID space of 24bit; in addition, VXLAN
+packets pass through VLAN-aware switches without any special configuration.
+
+Encapsulating mesh traffic has two advantages:
+
+* By using a different VXLAN ID for each site and mesh domain, accidental
+  wired mesh connections between nodes of different domains will be prevented.
+  This has special importance when nodes migrate between domains automatically,
+  as currently possible through different site-specific packages.
+* While batman-adv traffic does not interact with non-mesh traffic in the same wired
+  network in any way (so Gluon nodes can mesh over existing wired networks), this is
+  not the case for layer 3 mesh protocols like Babel. Encapsulating the traffic allows
+  to distinguish mesh traffic from unrelated packets.
+
+As enabling VXLAN encapsulation will prevent wired mesh communication with old nodes
+that do not support VXLAN yet, VXLANs can be enabled per-domain using the site configuration
+setting *mesh.vxlan*. VXLAN is enabled by default in multidomain setups; in single-domain
+site configurations, the *mesh.vxlan* setting is mandatory. We recommend to enable
+VXLAN encapsulation in all new sites and domains.
+
+Non-encapsulated ("legacy") wired meshing will be removed in a future Gluon release.
+We cannot give a concrete timeframe for the removal yet; a missing prerequisite is the
+implementation of a robust migration path for existing deployments.
+
 Configuration
-~~~~~~~~~~~~~
+*************
 
 Both Mesh-on-WAN and Mesh-on-LAN can be configured on the "Network" page
 of the *Advanced settings* (if the package ``gluon-web-network`` is installed).
@@ -24,27 +53,20 @@ of the *Advanced settings* (if the package ``gluon-web-network`` is installed).
 It is also possible to enable Mesh-on-WAN and Mesh-on-LAN by default by
 adding ``mesh_on_wan = true`` and ``mesh_on_lan = true`` to ``site.conf``.
 
-Commandline configuration
--------------------------
-
-Mesh-on-WAN
-...........
+Commandline
+===========
 
-It's possible to enable Mesh-on-WAN like this::
+Enable Mesh-on-WAN::
 
   uci set network.mesh_wan.disabled=0
   uci commit network
 
-It may be disabled by running::
+Disable Mesh-on-WAN::
 
   uci set network.mesh_wan.disabled=1
   uci commit network
 
-
-Mesh-on-LAN
-...........
-
-Configuring Mesh-on-LAN is a bit more complicated::
+Enable Mesh-on-LAN::
 
   uci set network.mesh_lan.disabled=0
   for ifname in $(cat /lib/gluon/core/sysconfig/lan_ifname); do
@@ -52,7 +74,7 @@ Configuring Mesh-on-LAN is a bit more complicated::
   done
   uci commit network
 
-It may be disabled by running::
+Disable Mesh-on-LAN::
 
   uci set network.mesh_lan.disabled=1
   for ifname in $(cat /lib/gluon/core/sysconfig/lan_ifname); do
@@ -60,6 +82,6 @@ It may be disabled by running::
   done
   uci commit network
 
-Please note that this configuration has changed in Gluon v2016.1. Using
-the old commands on v2016.1 and later will break the corresponding options
+Please note that this configuration has changed in Gluon 2016.1. Using
+the old commands on 2016.1 and later will break the corresponding options
 in the *Advanced settings*.